Insights into oil cracking based on laboratory experiments

The objectives of this pyrolysis investigation were to determine changes in (1) oil composition, (2) gas composition and (3) gas carbon isotope ratios and to compare these results with hydrocarbons in reservoirs. Laboratory cracking of a saturate-rich Devonian oil by confined, dry pyrolysis was performed at T=350–450 °C, P=650 bars and times ranging from 24 h to 33 days. Increasing thermal stress results in the C₁₅₊ hydrocarbon fraction cracking to form C_6–14 and C_1–5 hydrocarbons and pyrobitumen. The C_6–14 fraction continues to crack to C_1–5 gases plus pyrobitumen at higher temperatures and prolonged heating time and the δ ¹³C_ethane–δ¹³C_propane difference becomes greater as oil cracking progresses. There is considerable overlap in product generation and product cracking. Oil cracking products accumulate either because the rate of generation of any product is greater than the rate of removal by cracking of that product or because the product is a stable end member under the experimental conditions. Oil cracking products decrease when the amount of product generated from a reactant is less than the amount of product cracked. If pyrolysis gas compositions are representative of gases generated from oil cracking in nature, then understanding the processes that alter natural gas composition is critical.