Some thermodynamical and microphysical aspects of monsoon clouds

The thermodynamical and microphysical characteristics of monsoon clouds in the Poona, Bombay and Rihand regions were investigated using extensive aircraft in-cloud observations. The number of clouds sampled at Poona, Bombay and Rihand is 2199, 169 and 104 respectively. The temperatures inside the cloud are colder than its environment at Poona and Rihand. The maximum difference is about 3°C at the cloud base level and the difference decreased with height. At Bombay the difference is less than 1°C and at some levels the temperatures inside the cloud are warmer than its environment. The lapse rates of temperatures inside the cloud are slightly less than those in the immediate environment of the cloud. The environmental lapse rates are nearly equal to the saturated adiabatic value. The positive increments in liquid water content (LWC) are associated with the increments in temperature inside the cloud. Similarly positive increments in temperatures inside the cloud are associated with the increments in temperature of its immediate environment at the same level or the layer immediately above. The maximum cloud lengths observed at Poona and Bombay respectively are 14 and 3 km. The horizontal cross-section of LWC showed a maximum number of 13 peaks in clouds at Poona while only 7 peaks were observed at Bombay. The location of maximum LWC in the horizontal cross-section is more or less at the centre of the cloud. The LWC profile showed an increase with height from the base of the cloud at Poona and Bombay. There is no marked variation of LWC with height at Rihand. The total droplet concentration at different altitudes at Poona and Bombay is in the range 28–82 cm^?3. The size distribution of cloud droplets experienced a broadening effect with increase in height from the cloud base at Poona. The broadening effect at Bombay is not as marked as that at Poona.