Experimental testing of a rocking timber shear wall with slip‐friction connectors

Allowing a structure to uplift and rock during an earthquake is one way in which activated forces can be capped and damage to the structure avoided or minimised. Slip‐friction connectors (also known as slotted‐bolt connectors) were originally developed for use in steel construction, but for this research have been adapted for use as hold‐downs in an experimental 2.4 m × 2.4 m rigid timber shear wall. A novel approach is used to achieve the desired sliding threshold in the connectors, and the wall uplifts when this threshold is reached. From a series of quasi‐static cyclic tests, it is shown that slip‐friction connectors can impart ductile and elasto‐plastic characteristics to what would otherwise be essentially brittle structures. Because forces on the wall were capped by the slip‐friction connectors to levels well below the design level, no damage to the wall was observed. Self‐centring potential was also found to be excellent. The slip‐friction connectors themselves are of a unique design and have proven to be robust and durable, adequately performing their duty even after almost 14 m of cumulative travel under high contact pressures. To resist base shear without unduly affecting rocking behaviour, a new type of shear‐key is proposed and implemented, and a procedure developed to quantify its influence on overall wall behaviour. Copyright © 2014 John Wiley & Sons, Ltd.