Determination of in-situ stress direction from cleat orientation mapping for coal bed methane exploration in south-eastern part of Jharia coalfield, India

Accurate prediction of in-situ stress directions plays a key role in any Coal Bed Methane (CBM) exploration and exploitation project in order to estimate the production potential of the CBM reservoirs. Permeability is one of the most important factors for determination of CBM productivity. The coal seams in Jharia coalfield generally show low permeability in the range of 0.5 md to 3 md. To estimate the in-situ stress direction in the study area, an attempt has been made to undertake the cleat orientation mapping of four regional coal seams of two underground coal mines located at south-eastern part of Jharia coalfield, India. Cleat orientation mapping is critical to determine the maximum principal compressive horizontal stress (S_H) direction for CBM exploration and exploitation, which in turn controls the direction of maximum gas or water flow though coal beds. From the field study it is found that the average face and butt cleat azimuths are towards N15°W and N75°E respectively. Average permeability of the four above-mentioned major coal seams has been calculated from well logs of nine CBM wells distributing over an area of 7.5 km², adjacent to the underground mines. The cleat orientations are congruous with the regional lineament pattern and fits well with the average permeability contour map of the study area to infer the orientation of in-situ maximum horizontal stress. Goodness of fit for the exponential regressions between vertical stress and permeability for individual coal seams varies between 0.6 and 0.84. The cleat orientation is further validated from the previous fracture analysis using FMI well log in Parbatpur area located southern part of the Jharia coalfield. The major coal seams under the study area exhibit directional permeability, with the maximum permeability, oriented parallel to the direction of face cleat orientation.