Effect of lithology and structure on seismic response of steep slope in a shaking table test

Studies on landslides by the 2008 Wenchuan earthquake showed that topography was of great importance in amplifying the seismic shaking, and among other factors, lithology and slope structure controlled the spatial occurrence of slope failures. The present study carried out experiments on four rock slopes with steep angle of 60° by means of a shaking table. The recorded Wenchuan earthquake waves were scaled to excite the model slopes. Measurements from accelerometers installed on free surface of the model slope were analyzed, with much effort on time-domain acceleration responses to horizontal components of seismic shaking. It was found that the amplification factor of peak horizontal acceleration, R _PHA, was increasing with elevation of each model slope, though the upper and lower halves of the slope exhibited different increasing patterns. As excitation intensity was increased, the drastic deterioration of the inner structure of each slope caused the sudden increase of R _PHA in the upper slope part. In addition, the model simulating the soft rock slope produced the larger R _PHA than the model simulating the hard rock slope by a maximum factor of 2.6. The layered model slope also produced the larger R _PHA than the homogeneous model slope by a maximum factor of 2.7. The upper half of a slope was influenced more seriously by the effect of lithology, while the lower half was influenced more seriously by the effect of slope structure.