首页 | 本学科首页   官方微博 | 高级检索  
     

PDC钻头在天津地热井中的应用
引用本文:马忠平,杜槟,李振杰,杨忠彦,庞海. PDC钻头在天津地热井中的应用[J]. 探矿工程, 2010, 37(7): 12-14
作者姓名:马忠平  杜槟  李振杰  杨忠彦  庞海
作者单位:[1]天津地热勘查开发设计院,天津300250 [2]天津市地质工程勘察院,天津300191
摘    要:
天津地热钻井,一般采用传统的三牙轮钻头进行施工,近年来随着钻井工艺水平的进步,为了提高钻井效率,在部分井段中采用PDC钻头钻进,相比三牙轮钻头取得了更高的机械钻速,且泥岩地层造浆得到很好的控制,钻井液性能稳定,降低了维护成本。实践证明,PDC钻头使用寿命长,在提高钻进效率的同时经济效益显著。

关 键 词:地热井  PDC钻头  机械钻速  天津
收稿时间:2009-11-25
修稿时间:2010-01-27

Application of PDC Bit in Geothermal Well in Tianjin
MA Zhong-ping,DU Bin,LI Zhen-jie,YANG Zhong-yan and PANG Hai. Application of PDC Bit in Geothermal Well in Tianjin[J]. Exploration Engineering:Rock & Soil Drilling and Tunneling, 2010, 37(7): 12-14
Authors:MA Zhong-ping  DU Bin  LI Zhen-jie  YANG Zhong-yan  PANG Hai
Affiliation:1.Tianjin Geothermal Exploration and Development Designing Institute,Tianjin 300250,China;2.Tianjin Geo-engineering Investigation Institute,Tianjin 300191,China)
Abstract:
Geothermal well in Tianjin used to be constructed by traditional three-cone bit.With the development of drilling technology in recent years,PDC bit was adopted in some well sections to improve the drilling efficiency and mud making in mudstone formation was well controlled with steady performance of drilling fluid and lowered maintenance cost.PDC bit has long service life,which can improve drilling efficiency with obvious economical benefit.
Keywords:geothermal well  PDC bit  penetration rate  Tianjin
本文献已被 维普 等数据库收录!
点击此处可从《探矿工程》浏览原始摘要信息
点击此处可从《探矿工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号