Estimating irrigation inputs for distributed hydrological modelling: a case study from an irrigated catchment in southeast Australia

Adequate irrigation inputs are essential for the application of hydrological models in irrigated catchments, but reliable data on both the amount and the frequency of irrigation applications are often missing at an appropriate spatial scale. In this paper, we demonstrate and test approaches to estimate irrigation inputs for distributed hydrological modelling. In this context, the Soil and Water Assessment Tool was applied to simulate water balances for an irrigated catchment in southeast Australia during the period 2008–2010. Two methods for estimating irrigation inputs were tested. One method was based on a fixed irrigation application rate, whereas the other one had variable irrigation rates depending on season and the irrigated crop. These two approaches were also compared with the ‘auto‐irrigation’ method within the Soil and Water Assessment Tool model. The method with variable irrigation rates resulted in the most reasonable interpretation of the readily available irrigation data, consistent estimates of irrigation runoff coefficients throughout the year and the best fit to observed data on both drain flows at the catchment outlet and spatial evapotranspiration patterns. We also found that the different irrigation inputs significantly affected simulated water balances, in particular deep percolation under relatively dry climatic conditions. All these results suggest that it is possible to infer irrigation inputs from readily available data and local knowledge, adequate for hydrological modelling in irrigated catchments. Our study also demonstrates that, in order to predict reliable water balances in irrigated catchments, an accurate knowledge of irrigation scheduling and irrigation runoff is required. Copyright © 2015 John Wiley & Sons, Ltd.