首页 | 本学科首页   官方微博 | 高级检索  
     检索      


Structural control of geothermal reservoirs in extensional tectonic settings: An example from the Upper Rhine Graben
Institution:1. Division of Geothermal Research, Institute of Applied Geosciences, Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe, Germany;2. Institute of Nuclear Waste Disposal, Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe, Germany;3. Gruner Gruneko AG, Basel, Switzerland;1. Nevada Bureau of Mines and Geology, University of Nevada, Reno, NV 89557, USA;2. Department of Geothermal Science, GNS, New Zealand;1. State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing, Beijing 102249, China;2. Sinopec Research Institute of Petroleum Engineering, Beijing 100101, China;1. Structural Engineering, University of California San Diego, La Jolla, CA, USA;2. Applied Geology, Georg-August-Universität G?ttingen, G?ttingen, Germany;1. GFZ German Research Centre for Geosciences, Telegrafenberg, 14473 Potsdam, Germany;2. TUM Technische Universität München, Arcisstr. 21, 80333 Munich, Germany;3. Nevada Bureau of Mines and Geology, University of Nevada, Reno, NV 89557, USA
Abstract:In extensional tectonic settings major structural elements such as graben boundary faults are typically oriented subparallel to the maximum horizontal stress component SHmax. They are often structurally accompanied by transfer zones that trend subparallel to the extension direction. In the Upper Rhine Graben, such transfer faults are typically characterized by strike-slip or oblique-slip kinematics. A major re-orientation of the regional stress field by up to 90° of the Upper Rhine Graben in the Early Miocene led to the present-day normal and strike-slip faulting regimes in the North and South of the Upper Rhine Graben, respectively, and a transition zone in-between. Consequently, conditions for fault frictional failure changed significantly. Moreover, it has been observed during tracer and stimulation experiments that such transfer faults may be of major importance for the hydraulic field of geothermal reservoirs under the present stress condition, especially, when located between production and injection well.In this context we have investigated slip and dilation tendencies (TS and TD) of major structural elements at reservoir scale for two representative geothermal sites, Bruchsal (Germany) and Riehen (Switzerland), located close to the Eastern Main Boundary Fault of the Upper Rhine Graben. We have evaluated the quality and uncertainty range of both tendencies with respect to potential variation in SHmax orientation. Despite significant differences in orientation of the structures and the stress regimes, the resulting variation of TS and TD reveal major similarities concerning the reactivation potential of both, the graben-parallel structures and the transfer faults. The conditions of criticality for tensile failure and non-criticality for shear failure suggest that transfer faults are most likely naturally permeable structures with low stimulation potential. This is in agreement with the absence of both immediate tracer recovery and seismicity in the studied geothermal sites.
Keywords:Continental rift systems  Transfer fault  Fault reactivation  Fractured reservoirs  Stress analysis  Slip tendency
本文献已被 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号