The electrical conductivity of Posidonia black shales — from magnetotelluric exploration to rock samples

We carried out a magnetotelluric field campaign in the South–East Lower Saxony Basin, Germany, with the main goal of testing this method for imaging regional Posidonia black shale sediments. Two‐dimensional inversion results of the magnetotelluric data show a series of conductive structures correlating with brine‐saturated sediments but also with deeper, anthracitic Westphalian/Namurian coals. None of these structures can be directly related with the Posidonia black shale, which appears to be generally resistive and therefore difficult to resolve with the magnetotelluric method. This assumption is supported by measurements of electrical resistivity on a set of Posidonia shale samples from the Hils syncline in the Lower Saxony basin. These rock samples were collected in shallow boreholes and show immature (0.53% Ro), oil (0.88% Ro), and gas (1.45% Ro) window thermal maturities. None of the black shale samples showed low electrical resistivity, particularly those with oil window maturity show resistivity exceeding 10⁴ Ωm. Moreover, we could not observe a direct correlation between maturity and electrical resistivity; the Harderode samples showed the highest resistivity, whereas the Haddessen samples showed the lowest. A similar trend has been seen for coals in different states of thermal maturation. Saturation of the samples with distilled and saline water solutions led to decreasing electrical resistivity. Moreover, a positive correlation of electrical resistivity with porosity is observed for the Wickensen and Harderode samples, which suggests that the electrical resistivity of the Posidonia black shale is mainly controlled by porosity.