| Abstract: | In this article, we evaluate geomechanics of fluid injection from a fully penetrating vertical well into an unconsolidated formation confined with stiff seal rocks. The coupled behavior of an isotropic, homogeneous sand layer is studied under injection pressures that are high enough to induce plasticity yet not fracturing. Propagation of the significant influence zone surrounding the injection borehole, quantified by the extent of the plastic domain in the elasto‐plastic model, is examined for the first time. First, a new fully coupled axisymmetric numerical model is developed. A comprehensive assessment is performed on pore pressures, stresses/strains, and failure planes during the entire transient period of an injection cycle. Results anticipate existence of five distinctive zones in terms of plasticity state: liquefaction at wellbore; two inner plastic domains surrounding the wellbore, where failure occurs along two planes and major principal stress is in vertical direction; remaining of the plastic domain, where formation fails along one plane and major principal stress is in radial direction; and a non‐plastic region. Failure mechanism at the wellbore is found to be shear followed by liquefaction. Next, a novel methodology is proposed based on which new weakly coupled poro‐elasto‐plastic analytical solutions are derived for all three stress/strain components. Unlike previous studies, extension of the plastic zone is obtained as a function of injection pressure, incorporating plasticity effects on the subsequent elastic domain. Solutions, proven to be a good approximation of numerical simulations, offer a huge advantage as the run time of coupled numerical simulations is considerably long. Copyright © 2016 John Wiley & Sons, Ltd. |
