首页 | 本学科首页   官方微博 | 高级检索  
     检索      

盾构高水位下施工开挖面稳定性分析
作者姓名:黎春林  缪林昌
作者单位:1. 东南大学岩土工程研究所,江苏,南京,210096;铜陵学院土木建筑系,安徽,铜陵,244000
2. 东南大学岩土工程研究所,江苏,南京,210096
摘    要:盾构在有地下水和无地下水地区开挖有很大的不同,特别是在高水位下施工时,因为渗透力的影响可能会引起工作面的不稳定,而在实际工程中,这种影响很少被考虑,从而低估了盾构施工的风险。本文根据渗流场和温度场的相似性,将ANSYS软件的温度场分析功能应用于渗流场的分析,并利用ANSYS软件自带的APDL参数化语言开发渗流力计算模块,渗透力首先在流场进行计算,然后将其作为应力边界条件施加于各节点进行应力和变形分析,探讨渗流力的存在对盾构隧道开挖面稳定的影响。基于此,作者提出一种考虑渗流的新的开挖面稳定性分析方法,使盾构水下掘进的设计施工更加合理。

关 键 词:盾构  工作面稳定  渗流力  ANSYS  

Study on the Work Face Stability of Shield Tunnel Excavating in the High Groundwater Area
Authors:LI Chun-Lin  MIAO Li-Chang
Institution:LI Chun-Lin~(1,2),MIAO Li-Chang (1.Institute of Geotechnical Engineering,Southeast University,jiangsu Nanjing 210096,China,2.Department of Civil and Structural Engineering,Tongling University,Tongling Anhui244000,China)
Abstract:The Shield tunnels driven in a water-saturated soil are different from the tunnels driven in a dry soil,especially excavating in the high groundwater area,since the instability of tunnel work face may occur.When the water table is above the tunnel,the seepage force acting on the tunnel work face is an important factor on workface instability.In the practical engineering application, the influence of seepage force was rarely taken account into the workface stability analysis of shield tunnel excavation,which...
Keywords:shield tunnel  work face stability  seepage force  ANSYS  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号