首页 | 本学科首页   官方微博 | 高级检索  
     检索      

絮凝-CO2曝气-催化氧化处理制革废水研究
引用本文:单宝田,马根之,杜春梅,胡立阁,侯海军,黄立英.絮凝-CO2曝气-催化氧化处理制革废水研究[J].海岸工程,2001,20(3):54-59.
作者姓名:单宝田  马根之  杜春梅  胡立阁  侯海军  黄立英
作者单位:1. 青岛海洋大学工业水回用技术研究所,山东,青岛,266003
2. 青岛市崂山区环境保护局,山东,青岛,266061
摘    要:使用新型高效的絮凝剂MF,对制革废水进行絮凝吸附、CO2曝气、催化氧化回用处理试验,确定了絮凝剂MF的最佳使用条件、催化氧化时间和氧化剂用量.结果表明,制革废水经工艺处理后,对废水中主要污染物CODCr、S2-、Cr3+、SS、色度的去除率分别达到78.9%、97.5%、95.5%、91.4%、96.5%.处理后的废水基本达到鞣铬工艺用水要求和国家<污水综合排放标准>(GB8978-1996)限定的二级标准.

关 键 词:制革废水  回用  絮凝剂  CO2曝气  催化氧化
文章编号:1002-3682(2001)03-0054-06
修稿时间:2001年9月6日

STUDY ON THE TREATMENT OF TANNING WASTEWATER THROUGH FLOCCULATION, CO2 AERATION AND CATALYTIC OXIDATION
SHAN Bao-tian,MA Gen-zhi,DU Chun-mei,HU Li-ge,HOU Hai-jun,Huang Li-ying.STUDY ON THE TREATMENT OF TANNING WASTEWATER THROUGH FLOCCULATION, CO2 AERATION AND CATALYTIC OXIDATION[J].Coastal Engineering,2001,20(3):54-59.
Authors:SHAN Bao-tian  MA Gen-zhi  DU Chun-mei  HU Li-ge  HOU Hai-jun  Huang Li-ying
Abstract:An experiment with the tanning wastewater treatment through flucculation, CO 2 aeration and catalytic oxidation was made to determine the optimal conditions for using the flucculant MF, the catalytic oxidation duration and the oxidant consumption. It is shown from the test results that the removal rates for the main pollutants COD, S 2- ,Cr 3+ and SS in the wastewater are 78.9 %,97.5 %,95.5 % and 91.4 %, respectively. The treated effluent basically meets the standards for the water used for tanning process and the national standards for the discharged water of second category.
Keywords:tanning wastewater  reuse  flocculant  CO  2 aeration  catalytic oxidation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号