Elasticity of polycrystalline stishovite

Ultrasonic data for the velocities of SiO₂-stishovite have been determined as a function of pressure to 10 kbar at room temperature for polycrystalline specimens hot-pressed at pressures P = 120kbar and temperatures T = 900°C. These cylindrical specimens are 2 mm in diameter and 0.9–1.4 mm long and have a grain size less than 10 μm. Compressional and shear wave velocities were measured both parallel and perpendicular to the axis of pressing and were found to be isotropic at 10 kbar with ν_p = 11.0 ± 0.2km/sec andν_s = 6.9 ± 0.3km/sec; this shear velocit is substantially higher than that of Mizutani et al. (1972) perhaps due to the presence of crack orientations in their specimen which affected ν_s but not ν_p. The Murnaghan P-V trajectories calculated from the ultrasonic data [bulk modulus K_s = 2.5 ± 0.3Mbar and assuming (?K_s/?P)_T = 6 ± 2] are consistent with recent hydrostatic compression data and with the shock wave compression data above 600 kbar. The combined evidence from the data of the ultrasonic and hydrostatic compression techniques suggests that the most probable value of the bulk modulus of stishovite at zero pressure is close to the upper limit of the uncertainty of our ultrasonically determined value, K₀ = 2.7?2.8Mbar. Elasticity data for rutile-type oxides are not compatible with normal K_s-V₀ systematics perhaps due to the neglect of non-central forces in the lattice model. These new stishovite data would make it impossible to satisfy the elasticity-density data of the lower mantle using an oxide mixture with either olivine or pyroxene stoichiometry.