| 提高钻杆接头螺纹强度的有效方法研究 |
| |
| 引用本文： | 苏继军,殷琨,郭同彤.提高钻杆接头螺纹强度的有效方法研究[J].探矿工程,2005,32(8):40-42. |
| |
| 作者姓名： | 苏继军 殷琨 郭同彤 |
| |
| 作者单位： | 吉林大学 建设工程学院;吉林大学 建设工程学院;法国贡比涅技术大学 |
| |
| 基金项目： | 中国地质调查局项目(200220170007)；高等学校博士学科点专项科研基金(20030183024) |
| |
| 摘 要： | 以接触非线性有限元理论为基础，建立了钻杆接头螺纹非线性有限元分析模型。运用大型通用有限元分析软件研究了钻杆接头螺纹外径对其强度的影响规律。研究结果表明，适当增大螺纹外径，可以有效改善接头螺纹内部的应力分布状态，接头螺纹整体强度提高约32%。
|
| 关 键 词： | 绳索取心钻具 钻杆接头 螺纹强度 接触非线性有限元 |
| 收稿时间： | 2005/7/7 0:00:00 |
| 修稿时间： | 2005/7/7 0:00:00 |
Research on the Effective Means of Improving the Screw Strength of Drill Pipe Joint |
| |
| SU Ji-jun,YIN Kun and GUO Tong-tong.Research on the Effective Means of Improving the Screw Strength of Drill Pipe Joint[J].Exploration Engineering(Drilling & Tunneling),2005,32(8):40-42. |
| |
| Authors: | SU Ji-jun YIN Kun and GUO Tong-tong |
| |
| Institution: | Jilin University;Jilin University;Université de Technologie de Compiègne |
| |
| Abstract: | Based on the theory of contact non-linear finite element, the non-linear finite element analysis model of drill pipe joint screw was established, and the effect regular of external diameter of drill pipe joint on the its strength was researched by means of large general-purpose finite element analysis software .The result indicates that the ways of properly increasing the screw diameter can effective improve the stress distribution of the inner of joint screw, also the joint screw strength of drill pipe was increase 32%. |
| |
| Keywords: | |
|
| 点击此处可从《探矿工程》浏览原始摘要信息 |
| 点击此处可从《探矿工程》下载免费的PDF全文 |
