三元插层材料的合成及其在聚丙烯老化中的应用

以FeCl3?6H2O、NiCl2?6H2O、MgCl2?6H2O为原料，以NaOH为沉淀剂采用水热法合成了镁镍铁水滑石 (MgNiFe-LDH)，通过X射线衍射 (XRD)、傅里叶变换红外光谱 (FTIR) 和扫描电镜 (SEM) 分析了MgNiFe-LDH结构及形貌，探讨了不同陈化时间和水热温度对MgNiFe-LDH合成的影响。将制得的MgNiFe-LDH添加至聚丙烯 (PP) 中，制备MgNiFe-LDH/PP复合材料，通过对材料的加速老化测其力学性能，研究了添加MgNiFe-LDH前后材料力学性能的差异。研究结果表明，当Mg2+:Ni2+:Fe3+=2:1:1，反应温度为140℃、陈化时间为24 h时，合成的MgNiFe-LDH为片状，形貌较为规整，颗粒粒径约为2μm；经加速老化后，填充MgNiFe-LDH 复合材料的抗老化性能优于纯PP，当MgNiFe-LDH的填充量为6 wt% 复合材料拉伸强度不变，可明显提高PP的抗老化性能。     

Treatment of high fluoride concentration wastewater by layered double hydroxides： Mechanism studies

An appropriate concentration of fluoride in drinking water is required to prevent dental cavities, but long-term ingestion of water that contains more than a suitable level of fluoride can cause bone disease and mottling of the teeth. Fluoride ions can be found in wastewater from the fluoride chemical industry, as well as the semiconductor, metal processing, fertilizer, and glass-manufacturing industries. The discharge standard for fluoride in industrial wastewater in China is 10 mg/L. Efficient treatment of fluoride-containing wastewater is therefore of major concern in China, following the rapid development of the fluoride chemical industry. Several methods have been used to remove fluoride from water, such as adsorption, chemical precipitation, electrodialysis, ion exchange and electrochemical processes. Layered double hydroxides （LDHs） are anionic clays with high anion exchange capacities which are effective adsorbents for removal of a variety of anionic pollutants. LDHs have been studied as potential adsorbents for removing toxic anionic species such as CrO4^2-, TcO4^-, SeO3^2-, pesticides, and anionic surfactants from aqueous systems. One of the main attractions of using LDHs for fluoride removal, is that unlike other chemical treatment methods, no chemical sludge should be produced. In the present study, an attempt was made to investigate the mechanism of fluoride removal by LDHs under different conditions using batch methods. In addition, the release of fluoride adsorbed on LDHs by treatment with an aqueous solution of Na2CO3 was studied. The residual fluoride was found to be 10 mg/L in a solution with an initial concentration of 1000 mg/L, which meets the discharge standard for fluoride in industrial wastewater in China.     

Structural Evolvement of Heating Treatment of Mg/AI-LDH and Preparation of Mineral Mesoporous Materials

Although hydrotalcite, or layered double hydroxides （LDHs）, is not a common mineral, it is an important material that can be easily synthesized in laboratory. In this study, structural evolvement and BET surface area changes of heat treated Mg/AI-LDH is evaluated by XRD, TEM and N2-BET analyses. The results indicate that the magnesium-aluminum LDH with carbonate as interlayer anion, periclase-like oxides was formed at temperatures of 400-800℃. Meanwhile, 2-3 nanometer mesoporous were formed during decomposition of LDH. However, the heat treated samples still preserve the morphology of the original LDH plates. Periclase-like formed from LDH heat treatment may re-hydrolyze and recover the structure of LDH. However, crystallinity of the recovered LDH is lower than that of the original LDH. This heat treatment will result in formation of （Mg, Al）-oxide nano-crystals and nanopores among the nano-crystals. When heating temperature exceeds 1000, the periclase-like （Mg, Al）-oxide is transformed into a composite with periclase （MgO） and spinel phases. The periclase can be re-hydrolyzed and dissolved in HCl solution. After acid treatment, the sample with a high surface area is composed of spinel nano-crystals and nanopores among them. Our results will provide a new and economic way to synthesize mesoporous materials through pathways of phase transformation of precursor materials with different composition.     

青海茫崖石棉矿区变质超基性岩的蚀变演化序列：岩石化学及矿物学证据

青海茫崖石棉矿区超基性岩体是由原岩以纯橄岩、辉橄岩和橄辉岩为主体组成的富镁质超基性岩体,经历自变质和后期多期热液的叠加变质蚀变作用,经蛇纹石化后形成蚀变完全的蛇纹岩岩体,其中部分蛇纹岩又进一步发生滑石化及碳酸盐化蚀变为滑石菱镁片岩、菱镁滑石片岩、滑石片岩和菱镁岩等。本文在野外地质调查基础上,在室内通过镜下岩矿综合鉴定、全岩化学成分分析以及电子探针成分分析等手段进行了岩石化学特征、矿物学特征及其蚀变演化过程研究。结果表明,该变质超基性岩体蛇纹岩主要特征组合矿物为蛇纹石(利蛇纹石、叶蛇纹石、纤蛇纹石)、磁铁矿、菱镁矿、滑石、水镁石、铬铁矿,变余矿物有斜方辉石、单斜辉石和铬铁矿,滑石菱镁片岩类主要组成矿物为菱镁矿、滑石、蛇纹石及磁铁矿,局部可见石英脉。该地区变质超基性岩体较完整地记录了橄榄岩水化、滑石化及碳酸盐化作用过程的各个阶段,超基性岩蚀变演化过程主要有两个作用阶段:(Ⅰ)橄榄石、辉石类矿物的蛇纹石化作用及蛇纹石绿泥石化作用;(Ⅱ)富Ca、CO2流体交代蛇纹石、滑石及水镁石的碳酸盐化作用。蛇纹石化等变质蚀变作用促进了Si、Mg及Fe元素化学活动性,使元素发生富集与迁移,对于次生矿物的形成与演化起到了一定的催化作用。多期不同组成流体热液的交代作用过程,清晰地展示了利蛇纹石、纤蛇纹石和叶蛇纹石的演化序列,以及滑石、水镁石、铬铁矿和磁铁矿的形成过程及标形特征。     

湖南滑石矿床类型的划分及找矿方向

湖南滑石矿床类型可分为变质型、沉积风化残余型、中低温热液交代型三类。变质型又可分为区域动力变质和接触变质交代两个亚型。据湖南滑石矿床分布特点、成矿地质条件,全省滑石矿可划为四个成矿带、九个远景区,作为今后滑石找矿方向。     

复杂矿石中滑石的测定

含滑石复杂矿石试样经650℃焙烧,使其中绿泥石、菱镁矿等变得能迅速溶于1+1 HCl中,而滑石溶解率很低。残渣用HF-HClO_4或KOH处理,用火焰原子吸收法或滴定法测定MgO,计算滑石量。10余种共存矿物在一定范围内不干扰测定。     

医药矿产研究应用与发展

一、医药矿产的概念 根据天然矿产在中医药学临床应用中的功效,我们将那些在制作中成药或中药方剂中能作为药材入药,治疗和预防各种疾病,促进人体生长发育,使人健康长寿的天然矿物、岩石、化石等称为医药矿产。     

基于聚二甲基硅氧烷胶与Zn-Al型水滑石复合膜为离子载体的溶解二氧化碳电极及其性能标定

深海探测溶解CO2气体异常.可以为寻找热液口提供一个很好的证据.本文设计的基于自制的聚二甲基硅氧烷胶与Zn-Al型水滑石复合膜为离子载体的溶解CO2探测电极属于电势型CO2电极,适用于对深海中溶解形式的CO2的测量,具有体积微小、便于与pH、盐度、温度、氧化还原电位等多种传感器集成在同一探头腔内,实施在线探测等优点.实验室条件下.将该溶解CO2探测电极与银,氯化银参比电极分别接在Keithley 6517A高阻抗电位计输入端进行测试,测试结果表明:该电极对不同浓度的碳酸氢钠溶液具有良好的响应信号,响应时间大约在30s-1 min.检测限在10-1-10-4mol·L-1.