Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

东南沿海海堤现状调研报告（福建部分）

这部分是福建省正在建设中的四大海堤现状调研，包括达标设计各项指标及其加高加固的技术经验。同时调研了围海工程堵口海堤的施工过程，并对灌砂防渗措施加以评述。最后介绍了兴化湾的莆田海堤试验站和木兰陂水利工程     

BP神经网络模型在澜沧江流域径流量模拟中的应用

河川径流等水文时间序列属于复杂的非线性系统,使用回归分析等传统的分析方法,难以获取和描述其内在关联和变化规律。利用现有的相关站点的径流量历史数据和输沙量、降水量数据,在进行规格化处理和主成分分析的基础上,利用三层BP人工神经网络模型,对澜沧江流域上游昌都站径流量与各关联因子之间复杂的非线性映射关系进行模拟,采用拟牛顿算法对模型进行训练,模拟结果达到期望精度要求,并利用1982年~1985年实测数据进行模型验证。结果证明利用BP神经网络模型对澜沧江流域站点的月径流量序列进行模拟、预测和数据补缺处理具有可行性。     

雁南煤矿北二采区充水因素及开采影响评价

在全面分析大雁矿业集团公司雁南煤矿北二采区的水文地质条件及煤层开采矿井充水因素的基础上,计算了开采27^1号煤层时导水裂隙带发育高度．得出了北二采区各煤层工作面开采即不会受到上部砂砾含水层的影响,雁南煤矿铁路涵洞以西的胜利河冲击沟也不会受到北二采区的采动塌陷影响的结论。     

新密市白石沟井田二1煤层充水因素分析

白石沟井田是近年来探明的大巾型井田,位于五指岭-白寨背斜东端之南翼,新密-新郑复向斜之北翼．岗亚腰断层和梁山断层之间的地垒构造上,其基本构造形态为-向东倾伏的宽缓背斜。二叠系下统山西组二1煤为主要开采煤层,探明二1煤资源量7206×10^7t。分析了井田含水岩组及其富水性,对断层带及其富水特征进行了研究,从矿床（二1煤层）充水的水源、通道、机理三个方面分析了矿床充水因素,指出二1煤层的主要充水水源为该煤层底板的石炭系岩溶裂隙-承压水,充水通道为断层带和灰岩的岩溶裂隙发育带,充水机理为矿压及高水头压力冲破煤层底板阻水层阻力,形成底鼓,迅速突水。认为该井田水文地质勘查类型为三类二型,提出了排除与隔离地表水体,预留防水安全煤柱,灌浆辅助采掘的井田突水防范措施。     

贵州省大方县五凤井田水文地质特征初探

五风井田位于贵州省大方县城东侧,面积89.22km^2,含煤地层为二叠系上统龙潭组,主要可采煤层为6中、26、33号煤层,煤炭总资源量26 130万t。井田内主要含水层为三叠系茅草铺组岩溶溶洞含水层（T1m）,夜郎组玉龙山灰岩岩溶裂隙含水层T1y2）,二叠系中统长兴组岩溶裂隙含水层（P3c）、茅口组岩溶溶洞-暗河含水层（P2m）。矿床属于以岩溶充水为主,水文地质条件中等的矿床。井田的充水水源为地表水、地下水和小煤矿、采空区的老窑积水,充水通道为断裂破碎带及采矿冒落裂隙带。     

陆丰南地区断拗转换界面厘定及其地质意义

珠江口盆地经历裂陷阶段向拗陷阶段的转变，同期沉积地层记录了该构造变革和沉积演化过程，为厘定断拗转换界面提供了可能。基于地震反射、沉积旋回特征，识别出陆丰南地区恩平组内部存在全区可追踪对比的构造沉积转换面——T72界面，也是区分上下恩平组界面。对陆丰13洼洼间隆钻井LFA开展上下恩平组碎屑锆石U- Pb 定年、重矿物组分、元素分析，提出恩平组T72界面上下地层物源体系发生转变。结合区域沉积充填特征，表明陆丰南地区T72界面为断- 拗转换界面。具体表现为：下恩平组沉积期湖盆继承文昌期裂陷盆地特征，湖盆水体较深，物源主要为盆地内部的中生代基底凸起，沉积层序明显受盆内低凸起控制，在盆内低凸起四周发育一系列近源的辫状河三角洲，井区主要接受来自惠陆低凸起物源;上恩平组沉积期间，湖盆进入断拗过渡期，湖盆扩大、水体变浅，盆内低凸起四周的断裂活动减弱，沉积层序逐渐向盆内低凸起超覆，盆外太古宙—古生代物源组分供给不断加强，近源的三角洲砂体逐渐向远源的浅水三角洲砂体转化，同时发育宽广的滨浅湖环境，原供给物源的惠陆低凸起为水体淹没，井区接受了北部隆起外的物源。     

具有地形坡折带的坳陷湖盆层序地层模拟

层序地层学研究已在陆相湖盆中取得良好的应用效果，在陆相湖盆的地层对比、沉积体系空间分布预测中发挥重要作用。坳陷湖盆在基底受压变形过程中，常在盆缘形成地形坡折带，以坡折为界，基底的沉降速率和原始地形坡度等控制层序发育的重要因素在其两侧均存在显著的差异，这在很大程度上控制了层序的发育模式和沉积体系的空间配置关系。通过对基底沉降速率、湖平面变化速率、沉积物充填速率、沉积物充填准则、岩相确定原则等数学模 型的建立，模拟了具有地形坡折带的坳陷湖盆的层序发育和相演化过程。实际资料与模拟结果的对比分析表明，模拟具有很好的效果。     

南北地震带强震复发间隔的估计

通过对南北地震带各主要断裂带历史强震的时空特点研究 ,试图寻找出带内各主要构造带强震的复发和填充特征 ,并在此基础上研究其差异性 ,对未来各带发生强震的危险性作出估计     

双鸭山矿区矿井充水规律研究

根据双鸭山矿区的水文地质条件及多年生产实践资料(矿井涌水量与其相关因素——地貌、采掘深度、回采面积、巷道长度、岩性、构造、降雨的关系),阐述了矿区充水的一般规律,提出了含水砂层覆盖下采区进行水文地质勘探的重点及开采含水砂层覆盖下煤炭资源的主要防治水措施,对同类水文地质条件矿井开采煤炭资源具有可借鉴意义。