The Natural Resource Management Planning Portal: Perspectives for NRM Planning and Reporting

Natural Resource Management (NRM) is often conducted as a partnership between government and citizens. In Australia, government agencies formulate policy and fund implementation that may be delivered on-ground by community groups (such as Landcare). Since the late 1980s, over AUS$8b of Commonwealth investment has been made in NRM. However, quantitative evidence of environmental improvements is lacking. The NRM Planning Portal has been developed to (1) provide an online spatial information system for sharing Landcare and agency data; and (2) to facilitate NRM priority setting at local and regional planning scales. While the project successfully federates Landcare NRM activity data, challenges included (1) unstructured, non-standardized data, meaning that quantitative reporting against strategic objectives is not currently possible, and (2) a lack of common understanding about the value proposition for adopting the portal approach. Demonstrating the benefit of technology adoption is a key lesson for digital NRM planning.     

Water quality data for Fall Creek,New York,USA: 1972–1995

The 33 086 ha mixed land use Fall Creek watershed in upstate New York is part of the Great Lakes drainage system. Results from more than 3500 water samples are available in a data set that compiles flow data and measurements of various water quality analytes collected between 1972 and 1995 in all seasons and under all flow regimes in Fall Creek and its tributaries. Data is freely accessible at https://ecommons.cornell.edu/handle/1813/8148 and includes measurements of suspended solids, pH, alkalinity, calcium, magnesium, potassium, sodium, chloride, nitrate nitrogen (NO3-N), sulphate sulphur (SO4-S), phosphorus (P) fractions molybdate reactive P (MRP) and total dissolved P (TDP), percent P in sediment, and ammonium nitrogen (NH4-N). Methods, sub-watershed areas, and coordinates for sampling sites are also included. The work represented in this data set has made important scientific contributions to understanding of hydrological and biogeochemical processes that influence loading in mixed use watersheds and that have an impact on algal productivity in receiving water bodies. In addition, the work has been foundational for important regulatory and management decisions in the region.     

基于ArcGIS Engine与ArcGIS Server的海域定级信息管理系统设计与开发

以Visual Studio 2012为平台,利用ArcGIS Engine强大的空间分析功能,以C#为开发语言结合第三方插件设计开发海域定级决策子系统,实现了不同用海方式海域的自动化定级,对海域定级基础数据、过程数据和结果数据进行综合管理,构建了一个具有一定实用价值的海域定级信息管理系统原型;此外,利用WebGIS将海域定级决策子系统分析生成的结果数据发布成服务,实现海域定级信息共享子系统。本研究为海域定级提供智能化平台,提高对海域定级及评估效率,有利于海洋可持续发展。     

基于灯光数据的京津冀城市多标度异速分析

城镇体系的时空演化是一个复杂的动力学过程,具有无尺度性,其特征可以采用异速标度指数定量描述。论文以京津冀为例,基于1992—2013年夜间灯光数据的校正结果,提取城镇夜间灯光信息,采用多标度异速分析方法,分析京津冀城镇体系的相对发展特征及其空间分异格局。研究发现：①京津冀大城市的增长空间局限日益显著。虽然大城市如京津唐的绝对发展水平高,但接近环境承载量的极限,22 a间增长快速的是大城市交接地带的小城市(如三河、迁安、廊坊等)。②相对增长速度快的城市从东北到西南呈现带状分布——政府选择发展的“雄安新区”就在这个轴带上。由此可以得出两个结论：其一,京津冀城市演化的趋势相对均衡化,空间结构异质性逐步减弱,整个城镇体系的发展趋于相对平衡状态;其二,大、小城市“两极”贯通或许是增强城镇体系功能的有效途径。京津冀的空间格局优化不能仅仅考虑主要的、规模大的中心城市,而应该基于等级结构协调整个城镇网络体系。     

自然资源一体化政务服务系统及数据融合建设——以南京为例

自然资源部制定的信息化建设总体方案中，要求构建“互联网+自然资源政务服务”应用体系，实现“服务事项标准统一、整体联动、业务协同，自然资源政务服务和共享开放能力全面提高”。一体化政务服务系统作为政务服务应用体系的重点建设内容，也是落实自然资源管理“两统一”职责的重要支撑，如何整合各类数据资源、发挥系统作用，成为亟待研究的问题。本文在分析自然资源业务管理需求后，提出了一体化政务服务系统及数据融合的建设思路。     

利用超快速精密星历约束的北斗卫星实时精密定轨

以广播星历为起算轨道的北斗卫星实时滤波精密定轨往往需要较长收敛时间，针对此，提出利用超快速精密星历约束的实时精密定轨方法。通过MGEX跟踪网全球分布的51个测站连续7 d的实测数据，利用平方根信息滤波对北斗卫星实时精密轨道进行确定，并以3 d解事后轨道作为参考，评估北斗卫星实时滤波轨道精度。结果表明，利用广播星历作起算轨道时，北斗实时滤波轨道平均需要经过15 h收敛才能达到稳定，而新方法在这段时间内轨道变化较为平稳，未出现明显的收敛现象，并且7 d时间内GEO卫星在切向、法向和径向上RMS分别优于2.5 m、20 cm和30 cm，IGSO和MEO卫星在3个方向上分别优于30 cm、15 cm和10 cm。
     

涉密矢量数字地图中敏感要素几何信息量的测度方法

涉密矢量数字地图中敏感要素几何信息的定量测度,是实现定量化密级评定的基础和前提。如何进行敏感要素几何信息量的计算,目前尚缺乏相关研究。在现有地图信息论研究成果的基础上,论文主要开展了3方面的研究工作：首先,从地理对象的敏感性入手,探讨了地图要素敏感性的定义与要素集合的敏感性表征指标;然后,基于任意发生元的Voronoi构建方法,实现了对点要素集、线要素集、部分覆盖面要素集及综合要素集的信息单元自动化剖分;最后,基于长度系数、面积系数和角度系数,提出了线、面要素图形复杂度的计算方法,并在此基础上形成了涉密矢量数字地图中敏感几何信息量的测度方法。实验表明,该方法的计算结果遵循了信息量的非负性、连续性、可加性等特点,较为合理地反映了相关因素（地图比例尺、要素空间分布、要素图形复杂度、要素敏感系数等）对计算结果的影响。相关成果将支持矢量数字地图的定量化密级评定,并有助于完善地理信息安全监管的理论和方法体系。     

基于云存储技术的海岛信息管理和 展示平台设计与实现

随着海岛遥感影像数据的不断积累,传统数据存储管理方法越来越难以满足需求。针对上述问题,利用云存储技术对海岛影像数据进行分块组织,建立分布式海岛影像数据集,并在优化数据存储的同时,设计了一套海岛信息多形式展示平台。实现了信息检索、数据传输与审核、分析评价、成果展示和共享等功能。     

Developing constitutive models from EPR‐based self‐learning finite element analysis

A constitutive model that captures the material behavior under a wide range of loading conditions is essential for simulating complex boundary value problems. In recent years, some attempts have been made to develop constitutive models for finite element analysis using self‐learning simulation (SelfSim). Self‐learning simulation is an inverse analysis technique that extracts material behavior from some boundary measurements (eg, load and displacement). In the heart of the self‐learning framework is a neural network which is used to train and develop a constitutive model that represents the material behavior. It is generally known that neural networks suffer from a number of drawbacks. This paper utilizes evolutionary polynomial regression (EPR) in the framework of SelfSim within an automation process which is coded in Matlab environment. EPR is a hybrid data mining technique that uses a combination of a genetic algorithm and the least square method to search for mathematical equations to represent the behavior of a system. Two strategies of material modeling have been considered in the SelfSim‐based finite element analysis. These include a total stress‐strain strategy applied to analysis of a truss structure using synthetic measurement data and an incremental stress‐strain strategy applied to simulation of triaxial tests using experimental data. The results show that effective and accurate constitutive models can be developed from the proposed EPR‐based self‐learning finite element method. The EPR‐based self‐learning FEM can provide accurate predictions to engineering problems. The main advantages of using EPR over neural network are highlighted.     

基于LiDAR的农田地形环境三维重建方法

为克服传统农田土地平整测量方法耗时费力的特点，提出采用LiDAR技术对农田地形进行重建的探索性研究。通过HDL-32E型激光雷达等搭建了系统的硬件平台，应用C++语言编写了系统数据的采集程序；在此基础上对激光雷达所采集数据进行了标定，研究了农田地形重建系统中不同坐标系的转换方法；同时基于最小值去噪法设计了更适用于农田地形点云去噪的均值限差去噪法。通过对比在农田起伏较大区域不同坡度范围内RTK与激光雷达所测单元个数，对系统精度进行了评价；最后实现了车载农田地形重建系统的界面显示、应用与精度评估。结果表明，在10°~15°、25°~30°大坡度范围内激光雷达所获农田地形更为丰富，精度更高。该方法重建的农田地形模型点云数据和原始农田地形点云数据投影面积逼近度可达93%，验证了本文研究方法应用于农田地形环境重建的可行性，同时为今后的土地精细平整工作提供了理论参考与依据。