基于中间件的遥感影像数据共享技术研究

针对遥感影像共享服务的应用需求,提出基于中间件技术的影像数据共享方法;设计基于中间件技术的影像数据服务模式。通过实验实现支持多用户并发访问的服务原型,验证基于中间件技术的影像数据服务方法的可行性并给出进一步研究的方向。     

VO_IMPAT:中国虚拟天文台图像处理分析工具

中国虚拟天文台图像处理分析工具（VO_IMPAT），是由国家天文台虚拟天文台项目组开发的一项服务，它提供了对数字巡天图像数据（Digital Sky Survey，DSS）、天文星表以及其他数据库的交互访问。VO_IMPAT的设计目的是实现多波段天文数据的融合。可以将不同波段的星表叠加到DSS底图上，如光学波段的USNO星表、近红外波段的2MASS星表、射电波段的NVSS星表和X射线波段的RASS星表。同时VO_IMPAT还可以对图像进行放大、缩小、伪彩色、等高线、直方图、尖锐化、平滑化、旋转等处理，不同的星表数据可以采用不同的颜色和图标显示。     

FITS、BMP和SCR图象格式及相互转换

本文详细介绍图象的ＦＩＴＳ格式、ＢＭＰ格式和ＳＣＲ格式。ＦＩＴＳ格式已经是天文界的通用格式，几乎所有的天文软件包都支持这一格式，而ＢＭＰ格式在ＰＣ计算机上有广泛的运用，有大量ＰＣ软件支持ＢＭＰ图象的显示，处理和打印。云南天文台的ＳＣＲ格式是ＰＣ机采集ＣＣＤ图象所使用的格式。实现这三种格式的相互转换，就可以自由的将ＣＣＤ图象在ＰＣ机和工作站上进行各种处理。转换的包括图象头和图象数据的转换，其关键在于交换数据的高低字节。     

图象的模型及其统计特性

本文对图象的统计特性及其适用模型作了分析。讨论了以前常用的平稳图象模型的缺陷,对实际图象的统计特性作了分析,认为它是非平稳的,不满足各态历经性,同时在空间上是高度相关的;讨论了相应的随机参数统计模型和描述性统计模型。指出作用于整幅图象的“全局”图象复原算法比每次只独立计算单个象元的“点”图象复原算法更为优越。     

全球Ms≥7￣3／4级地震的定向迁移

对全球尺度的６条大地震带内１９００～１９９０年中１８４次Ｍｓ≥７３／４级地震进行了沿地震带方向定向迁移的分析，获得了全球统一的地震定向迁移规律，总体是由西向东，迁移速度由７００ｋｍ／ａ变为１５０ｋｍ／ａ，此现象可以作多种暂态地球动力作用过程的推论，如以大西洋脊间歇式张裂引起上地幔软流物质自西向东运动，呈现纵波式的振荡传播；也可解释为非洲板块、阿拉伯板块和印度板块自西南向东北对欧亚地震带依次的推压引起向东的应变波的传播；太平洋脊两侧洋底板块向西北和东北两侧的斜向推压，可能是造成两侧地震带地震向北迁移的触发源     

Interpretation of transient electromagnetic soundings over three-dimensional structures for the central-loop configuration

Summary. An assessment is made of the bias of fitting constrained layered-earth models to transient electromagnetic data obtained over 3-D structures. In this assessment we use the central-loop configuration and show that accurate estimates of the depth of burial of 3-D structures can be obtained with layered-earth model fitting. However, layered-earth interpretations are not reliable for estimating depth extents and resistivities of 3-D structures. When layered earths are used for interpretation, it is advantageous in some cases to use data based on the magnetic field instead of the voltage. A magnetic-field definition of apparent resistivity, in contrast to a definition based on the voltage, eliminates apparent-resistivity overshoots and undershoots in the data. A resistivity undershoot in the data can produce an extraneous and misleading layer in an interpretation of a 3-D resistive structure. Due to 3-D effects, apparent-resistivity soundings (magnetic field and voltage) may rise so steeply at late times that it may not be possible to fit a sounding to a reasonable layered-earth model. Truncating such a sounding, over a buried conductor, allows for a reasonable layered-earth fit and an accurate estimate of the depth to the conductor. However, the resistivity of the conductor is overestimated.
Measurements of the horizontal field in the central-loop configuration can map 3-D structures, provided the sensor is located accurately at the centre of the transmitting loop. Horizontal-field calculations show that the transients peak on the flanks of a 3-D structure, but are depressed over the structure's centre. Weak transient responses flanked by two large transient responses, which are opposite in sign, locate the structure. The sign reversal is caused by a corresponding reversal in the currents that are channelled through or deflected away from conductive or resistive structures, respectively.     

Mapping Proterozoic unconformity-related uranium deposits in the Rockhole area, Northern Territory, Australia using landsat ETM+

The Rockhole area, Northern Territory, Australia, hosts a number of Proterozoic unconformity-related uranium deposits. The geology of the area features within Paleoproterozoic rocks of the Pine Creek Orogen, near the unconformity with overlying platform cover sandstone of the Paleo- to Mesoproterozoic McArthur Basin. Landsat Enhanced Thematic Mapper plus (ETM+) data was used in the Rockhole area to assist in mapping geological structures and lithology, and to identify anomalous concentrations of ferrous minerals, the product of alteration, which can be indicators of buried uranium mineralization. Several image-processing procedures were applied to the ETM+ data to identify, isolate and enhance mineralogical information as simple and complex false color composites. ETM+ 754 shown as red green and blue respectively was the best simple image. Overall, complex images based on Principal Component Analysis proved to be the most useful products. Sandstone, shale and siltstone, the target lithologies, Koolpin Formation, the target stratigraphic unit, and bleaching pattern due to the removal of iron(II) compounds, the target alteration pattern, were confidently mapped to provide information required by the mineral emplacement model, which ultimately identified areas of likely uranium mineralization. Thus the contrasting behavior of the two principle oxidation states of uranium and iron can be utilized to map/delineate bleached alteration zones associated with economic concentrations of uranium using multispectral sensors like Landsat or better hyperspectral sensors.     

Contribution of the SISCam Web-based GIS to the seismotectonic study of Campania (Southern Apennines): an example of application to the Sannio-area

In this article the implementation and potential of the Seismotectonic Information System of the Campania Region (SISCam) are described, in particular an application of this Web-based GIS system to the seismotectonic analysis of the Sannio area (Southern Apennines) is performed. WEB-GIS technologies greatly contribute to both the environmental monitoring and the disaster management of areas affected by high natural risks. Specifically the SISCam system has been developed with the aim of providing easy access and fast diffusion, through Internet technology, of the most significant geological, geophysical, and territorial data relative to the Campania Region. The Sannio area has been selected as our application example because it is among the most active seismic regions in Italy. This portion of the Southern Apennines which was hit by the June 5, 1688 strong earthquake (M _W = 6.7, CPTI 1999) and by some low- and moderate-energy seismic sequences (1990–1992, 1997), is characterized by a complex inherited tectonic setting and low-tectonic deformation rates that hide the seismogenic sources position. Since this case study turned out to be complicated, the use of the SIScam WEB-GIS has become indispensable because it allowed us to visualize, integrate and analyze all the data available, in order to obtain an accurate and direct picture of the seismotectonic setting of the area. Moreover, a different approach of data analysis was necessary, due to the lack of up-to-date neotectonic and structural data; therefore, the operation of this GIS system enabled us to process and generate some original informative layers, through image analysis, such as new structural lineaments represented on a map of the potential active faults of the area, which has been the final result of our application, as a contribution to new knowledge about the local seismic risk parameters.     

伊通盆地梁家地区奢岭组混源扇三角洲内幕结构

伊通盆地梁家地区(二号断层上盘)钻井揭示奢岭组是该区主要的油气富集层,目前研究结果认为奢岭组储集层是由两个方向的扇三角洲混合沉积形成,但由于资料有限,应用常规方法无法清楚地认识两个不同方向的物源混合沉积的扇三角洲的内幕特征以及这两个物源如何动态地控制着砂体的分布,影响了对该区油气储集层的深入认识.应用地震和地质资料,在波阻抗反演结果二次解释的基础,解析了这两个混合物源扇三角洲的内幕特征和演化特征,得出3个结论:(1)伊通盆地梁家地区奢岭组至少有4期扇三角洲沉积,每期扇三角洲的沉积范围由下向上逐渐扩大,反映了基准面逐渐下降的过程;(2)奢岭组的4期扇三角洲是由两个物源混合沉积形成,这4期扇三角洲逐渐由受从二号断层来的物源控制为主,变为由受从北东方向来的物源控制为主;(3)基于波阻抗体进行的砂层组解释和分析,能够清楚地分析扇三角洲沉积体的内幕结构,是应用波阻抗进行高分辨率地震分析和应用的一种新的分析方法.     

Field observations of waves generated by passing ships: A note

This short contribution reports the results of a field study on the nearshore characteristics of waves generated by both conventional and high speed passenger ferries. The field observations took place in the late summer of 2005, at a beach close to the port of Mytilene (Island of Lesbos, Greece), and involved the visual observation of ship waves, using digital video recordings and image processing techniques. The results showed that passage of the fast ferry was associated with a longer, more complex and energetic nearshore event; this event not only did include higher nearshore waves (up to 0.74 m) and was organised in different wave packets, but it was also an order of magnitude longer (∼ 680 s) than the conventional ferry event. Regarding the effects on beach sediment dynamics, the fast ferry waves were estimated to be very efficient in mobilising the nearshore sediments in contrast to those of the conventional ferry. The fast ferry service appears to generate daily prolonged nearshore events, which contain waves with higher energy than those expected from the normal summer wind wave regime of the area; these events also include some high and very steep waves, which can be particularly erosive. Therefore, fast ferry wakes may have considerable impacts on the seasonal beach sediment dynamics/morphodynamics and the nearshore benthic ecology, as well as they may pose significant risks to bathers, affecting the recreational use of the beaches exposed to fast ferry traffic. Finally, the study has shown that satisfactory field observations of the nearshore characteristics of ship-generated (and wind) waves can be obtained using inshore deployments of calibrated poles, digital video cameras and appropriate image processing algorithms.