处理水环境中微量铬的菌种筛选研究

从云南各地采集微生物菌种进行筛选、驯化,找到一株对水环境中的微量铬具有良好吸附去除能力的菌种,并研究了碳源、氮源、培养液pH值和培养温度等因素对其去除铬的影响.试验结果表明,去除水环境中微量铬的适宜菌种的培养条件为以可溶性淀粉为碳源、（NH4）2SO4为氮源、培养温度25℃、培养液pH 8,培养液中碳：氮=10：1,利用该条件培养的菌种对水环境中微量铬具有较好的去除能力.     

The influence of Cr on the garnet–spinel transition in the Earth''s mantle: experiments in the system MgO–Cr2O3–SiO2 and thermodynamic modelling

The position of the transition from spinel peridotite to garnet peridotite in a simplified chemical composition has been determined experimentally at high pressures and high temperatures. The univariant reaction MgCr₂O₄+2Mg₂Si₂O₆=Mg₃Cr₂Si₃O₁₂+Mg₂SiO₄, has a negative slope in P–T space between 1200 °C and 1600 °C. The experimental results, combined with assessed thermodynamic data for MgCr₂O₄, MgSiO₃ and Mg₂SiO₄ give the entropy and enthalpy of formation of knorringite garnet (Mg₃Cr₂Si₃O₁₂). Thermodynamic calculations in simplified chemical compositions indicate that Cr shifts the garnet-in reaction to much higher pressures than previously anticipated. Moreover, in Cr-bearing systems a pressure–temperature field exists where garnet and spinel coexist. The width of this divariant field strongly depends on the Cr/(Cr+Al) of the system.     

Electrodialytic remediation of CCA-treated waste wood in pilot scale

When chromated copper arsenate (CCA)-treated wood is removed from service and turns into waste, the contents of Cu, Cr and As remain high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA-treated waste wood is not allowed in Denmark; instead, the wood is to be land-filled until new methods for handling the wood are available. Since the amounts of CCA-treated wood being removed from service is expected to increase in the years to come, the need for finding alternative handling methods is very relevant. In this study, the usefulness of Electrodialytic Remediation was demonstrated for handling of CCA-treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low-level direct current (DC) as the cleaning agent, combines electrokinetic movement of ions in the wood matrix with the principles of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA-treated wood using electrodialytic remediation in laboratory scale, but until now, the method had not been studied in large scale. The pilot-scale plant used in this study was designed to contain up to 2 m³ wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to finally 150 cm. The remediation time was varied between 11 and 21 days, and phosphoric acid and/or oxalic acid was used to facilitate the desorption of CCA from the wood. In the most successful of the experiments carried out, the concentration of CCA in the wood was reduced by up to 82% for Cr, 88% for Cu and at least 96% for As.     

Effect of chemical fertilizers on the fractionation of Cu,Cr and Ni in contaminated soil

Effect of chemical fertilizers (urea, NH₄Cl, Ca(NO₃)₂, KCl and KH₂PO₄) on the fractionation of Cu, Cr and Ni was studied by a 4-month incubation experiment. Using sequential extraction procedure, it was found that the application of fertilizers could change the distribution of Cu, Cr and Ni in the fractions of soil. Applying urea (CO(NH₂)₂) significantly decreased the concentrations of Cu, Cr and Ni in water soluble plus exchangeable (WE) fraction, but increased those in Fe–Mn oxides bound (FM) fraction (p < 0.01). However, application of NH₄Cl caused an increase in the WE fraction by 27.7% for Cu, 111.5% for Cr and 20.4% for Ni. The CO(NH₂)₂ raised the soil pH from 4.51 to 4.96, whereas NH₄Cl lowered the pH of soil by 0.44 units. The WE fraction of the three heavy metals was significantly increased, while the FM fraction was significantly decreased by adding KCl (p < 0.01). Moreover, the supply of KH₂PO₄ reduced the WE and carbonate bound (CB) fractions of Cu, Cr and Ni in the soil, however, it raised Cu and Ni in the residual (RS) fraction and Cr in the FM fraction. In addition, the mobility index indicated that KCl and NH₄Cl increased the mobility of Cu, Cr and Ni in the soil, whereas urea and KH₂PO₄ decreased the mobility of the three metals in the soil. These results suggest that applying chemical fertilizers does not only provide plant nutrients, but may also change the speciation and mobility of heavy metals in the soil.     

Photoluminescence of synthetic titanite-group pigments: A rare quenching effect

Chromium-doped titanite and malayaite samples, which were synthesised to evaluate their performance as ceramic pigments, show remarkable photoluminescence behaviour. Emissions of centres related to traces of trivalent rare-earth elements (REE) are observed exclusively from chromium-free samples. Their Cr-doped analogues (containing the same REEs on the same concentration levels), in contrast, only show broad-band Cr³⁺ emission whereas all REE emissions are suppressed. This behaviour is assigned to quenching of REE emissions by chromium centres (i.e., REE³⁺ → Cr³⁺ energy transfer).     

北京地区铬的土壤化学地理

本文以化学地理学的观点，讨论了铬在土壤中的来源，分布规律，迁移和残留累积，生态和环境效应，循环与平衡，预测和评价。     

High-pressure decomposition of MCr2O4 spinels (M=Mg, Mn, Zn) by ab initio methods

The high-pressure equation of state of the normal spinels MgCr₂O₄ (picrochromite), MnCr₂O₄ and ZnCr₂O₄, and their reaction of decomposition into Cr₂O₃ (eskolaite) and MO (rocksalt-type) component oxides, were investigated by periodic unrestricted Hartree-Fock calculations. All-electron basis sets, and an a posteriori correction for the electron correlation energy, based on Density-Functional-Theory, were employed. Interpolation of results by the P-V Murnaghan equation of state yielded the equilibrium volume and energy, and the bulk modulus and its pressure derivative, for each of the seven phases (three spinels, three rocksalt oxides and eskolaite) considered. The simulated behaviour of interatomic distances vs pressure shows similar compressibilities of M-O bonds in both octahedral and tetrahedral coordinations. Binding energies and formation enthalpies of spinels from oxides are also computed and compared to available experimental data. The predicted decomposition pressures of Mg, Mn and Zn chromium spinels are 19, 23 and 34 GPa, respectively. The greater stability of ZnCr₂O₄ is related to Zn²⁺ being better suited to tetrahedral coordination than the other M²⁺ cations. Such results are strongly supported by the excellent agreement previously obtained between simulated (11 GPa) and experimental (13 GPa) pressures of the decomposition of MgAl₂O₄ spinel into corundum and periclase. Received: 9 February 1998 / Accepted: 12 October 1998     

Chromium Removal through Biosorption and Bioaccumulation by Bacteria from Tannery Effluents Contaminated Soil

Four bacterial isolates (two resistant and two sensitive to chromium) were isolated from soil contaminated with tannery effluents at Jajmau (Kanpur), India, and were identified by 16S rDNA gene sequencing as Stenotrophomonas maltophilia, Exiguobacterium sp., Pantoea sp., and Aeromonas sp. Biosorption of chromium by dried and living biomasses was determined in the resistant and sensitive isolates. The effect of pH, initial metal concentration, and contact time on biosorption was studied. At pH 2.5 the living biomass of chromium resistant isolate Exiguobacterium sp. ZM‐2 biosorbed maximum amount of Cr⁶⁺ (29.8 mg/g) whereas the dried biomass of this isolate biosorbed 20.1 mg/g at an initial concentration of 100 mg/L. In case of chromate sensitive isolates, much difference was not observed in biosorption capacities between their dried and living biomasses. The maximum biosorption of Cr³⁺ was observed at pH 4.5. However, biosorption was identical in resistant and sensitive isolates. The data on chromium biosorption were analyzed using Langmuir and Freundlich isotherm model. The biosorption data of Cr⁶⁺ and Cr³⁺ from aqueous solution were better fitted in Langmuir isotherm model compared to Freundlich isotherm model. Metal recovery through desorption was observed better with dried biomasses compared to the living biomasses for both types of chromium ions. Bioaccumulation of chromate was found higher in chromate resistant isolates compared to the chromate sensitive isolates. Transmission electron microscopy confirmed the accumulation of chromium in cytoplasm in the resistant isolates.     

Adsorption of Chromium(III), Nickel(II), and Copper(II) from Aqueous Solution by Activated Alumina

The possible use of activated alumina powder (AAP) as adsorbent for Cr(III), Ni(II), and Cu(II) from synthetic solutions was investigated. The effect of various parameters on batch adsorption process such as pH, contact time, adsorbent dosage, particle size, temperature, and initial metal ions concentration were studied to optimize the conditions for maximum metal ion removal. Both higher (molar) and lower (ppm) initial metal ion concentration sets were subjected to adsorption on AAP. Adsorption process revealed that equilibrium was established in 50 min for Cr(III) at pH 4.70, 80 min for Ni(II) at pH 7.00, and 40 min for Cu(II) at pH 3.02. Percentage removal was found to be highest at 55°C for Cr(III) and Ni(II) with 420 µm and 45°C for Cu(II) with 250‐µm particle size AAP. A dosage of 2 g for Cr(III), 8 g for Ni(II), and 10 g Cu(II) gave promising data in the metal ion removal. The adsorption process followed Langmuir as well as Freundlich models. The thermodynamics of adsorption of these metal ions on activated aluminum indicated that the adsorption was spontaneous and endothermic in nature. Present study indicates that AAP can act as a promising adsorbent for industrial wastewater treatment.