Basin filling evolution of the central basins of Mallorca since the Pliocene

A new compilation of data from 436 drill cores using decompaction and backstripping techniques was used to reconstruct the basin filling history from the Pliocene until the present day in the Palma, Inca and Sa Pobla Basins on the island of Mallorca (Spain). Calcareous rocks dominate the source area and provide a limited amount of clastic input to the basins that has resulted in an average accumulation rate of between 5 and 20 m/Ma during the last 5.3 Ma. Carbonate sediment production dominated the basin filling history during early‐mid Pliocene, but during the Quaternary, the sedimentation processes in the Palma Basin were probably enhanced by an evolution in the drainage network that increased the sediment supply and the accumulated thickness caused by stream capture. However, the maximum sedimentation rate filling the depocentres of the three basins has been decreasing since the Pliocene, showing that not only the catchment transport efficiency but also the relative sea level have been controlling the sediment accumulation in these carbonate basins. The isopach cross‐sections support the idea that a palaeorelief was generated during the Messinian sea level drop and that heterogeneities were filled in from the Pliocene to the Quaternary. We conclude that the central basins of Mallorca were filled heterogeneously due to tectonic and geomorphic processes that controlled sediment transport and production, resulting in different average sedimentation thicknesses that decreased since the Pliocene as the accommodation space became filled and the relative sea level dropped.     

The sandstone-hosted stratiform copper mineralization at Mwitapile and its relation to the mineralization at Lufukwe, Lufilian foreland, Democratic Republic of Congo

The Lufilian foreland is a triangular-shaped area located in the SE of the Democratic Republic of Congo and to the NE of the Lufilian arc, which hosts the well-known Central African Copperbelt. The Lufilian foreland recently became an interesting area with several vein-type (e.g., Dikulushi) and stratiform (e.g., Lufukwe and Mwitapile) copper occurrences. The Lufilian foreland stratiform Cu mineralization is, to date, observed in sandstone rock units belonging to the Nguba and Kundelungu Groups (Katanga Supergroup).The Mwitapile sandstone-hosted stratiform Cu prospect is located in the north eastern part of the Lufilian foreland. The host rock for the Cu mineralization is the Sonta Sandstone of the Ngule Subgroup (Kundelungu Group). A combined remote sensing, petrographic and fluid inclusion microthermometric analysis was performed at Mwitapile and compared with similar analysis previously carried out at Lufukwe to present a metallogenic model for the Mwitapile- and Lufukwe-type stratiform copper deposits. Interpretation of ETM+ satellite images for the Mwitapile prospect and the surrounding areas indicate the absence of NE–SW or ENE–WSW faults, similar to those observed controlling the mineralization at Lufukwe. Faults with these orientations are, however, present to the NW, W, SW and E of the Mwitapile prospect. At Mwitapile, the Sonta Sandstone host rock is intensely compacted, arkosic to calcareous with high silica cementation (first generation of authigenic quartz overgrowths). In the Sonta Sandstone, feldspar and calcite are present in disseminated, banded and nodular forms. Intense dissolution of these minerals caused the presence of disseminated rectangular, pipe-like and nodular dissolution cavities. Sulfide mineralization is mainly concentrated in these cavities. The hypogene sulfide minerals consist of two generations of pyrite, chalcopyrite, bornite and chalcocite, separated by a second generation of authigenic quartz overgrowth. The hypogene sulfide minerals are replaced by supergene digenite and covellite. Fluid inclusion microthermometry on the first authigenic quartz phase indicates silica precipitation from an H₂O–NaCl–CaCl₂ fluid with a minimum temperature between 111 and 182 °C and a salinity between 22.0 and 25.5 wt.% CaCl₂ equiv. Microthermometry on the second authigenic quartz overgrowths and in secondary trails related to the mineralization indicate that the mineralizing fluid is characterized by variable temperatures (Th = 120 to 280 °C) and salinities (2.4 to 19.8 wt.% NaCl equiv.) and by a general trend of increasing temperatures with increasing salinities.Comparison between Mwitapile and Lufukwe indicates that the stratiform Cu mineralization in the two deposits is controlled by similar sedimentary, diagenetic and structural factors and likely formed from a similar mineralizing fluid. A post-orogenic timing is proposed for the mineralization in both deposits. The main mineralization controlling factors are grain size, clay and pyrobitumen content, the amount and degree of feldspar and/or calcite dissolution and the presence of NE–SW to ENE–WSW faults. The data support a post-orogenic fluid-mixing model for the Mwitapile- and Lufukwe-type sandstone-hosted stratiform Cu deposits, in which the mineralization is related to the mixing between a Cu-rich hydrothermal fluid, with a temperature up to 280 °C and a maximum salinity of 19.8 wt.% NaCl equiv., with a colder low salinity reducing fluid present in the sandstone host rock. The mineralizing fluid likely migrated upwards to the sandstone source rocks along NE–SW to ENE–WSW orientated faults. At Lufukwe, the highest copper grades at surface outcrops and boreholes were found along and near to these faults. At Mwitapile, where such faults are 2 to 3 km away, the Cu grades are much lower than at Lufukwe. Copper precipitation was possibly promoted by reduction from pre-existing hydrocarbons and non-copper sulfides and by the decrease in fluid salinity and temperature during mixing. Based on this research, new Cu prospects were proposed at Lufukwe and Mwitapile and a set of recommendations for further Cu exploration in the Lufilian foreland is presented.     

Structural characterization of deep-water deposits in a foreland basin, Silla Syncline (Chilean Patagonia), with applications to depositional processes

Based on our detailed structural characterization, we examine possible relationships between thrust faults and strike-slip faults and thrust-cored folds and depositional units in the Silla Syncline, a 4 km wide fold composed of fine-grained mudstone, coarse sandstone and conglomerate deposits of the Cerro Toro Formation in the Magallanes foreland basin, Chilean Patagonia. The syncline is bounded on its western flank by an asymmetric anticline and on its eastern flank by a broad zone of thrust faults and associated folds, which are oriented sub-parallel to the syncline axis. Deposition of the coarse-grained units of the Silla Syncline appears to have taken place in this structurally defined trough controlled primarily by thrust fault related growth structures flanking the syncline.The syncline and surrounding area have also been deformed by two sets of strike-slip faults, one right-lateral and one left-lateral. The strike-slip and thrust faulting operated contemporaneously for much of their active periods, although it appears that thrust faulting, confined within the fine-grained units, initiated slightly earlier than strike-slip faulting. In addition, younger igneous intrusions at high angle to bedding generally localize along the strike-slip faults. The cross-cutting relationships among the intrusions, strike-slip faults, and flexural slip faults show that all these structures were active during the same period, which extends beyond mid-Miocene.These conclusions support the premise that structures in deep-water sediments are important for understanding not only the deformation of a foreland basin, but also its depositional architecture.     

川西前陆盆地中—新生代沉积迁移与构造转换

川西前陆盆地中—新生代各构造层的残余厚度展布和沉积特征分析发现,四川克拉通周缘的前陆盆地在晚三叠世时期发育于龙门山山前,明显属于龙门山褶皱逆冲构造载荷所形成的前渊凹陷;侏罗纪早期的沉积地层呈面状分布,没有表现出显著的挠曲沉降,指示了一个构造相对平静的阶段;中侏罗世早期前渊凹陷迁移至龙门山北段和米仓山山前,前渊沉积从晚三叠世的北东向转换为近东西向,广泛的湖泊相沉积预示了前陆盆地的欠充填状态;中侏罗世中晚期,川西盆地沉降中心又迁移到大巴山山前,相应的挠曲变形又从近东西向转化为北西向,构成了大巴山的前渊凹陷;晚侏罗世—早白垩世时期,沉降中心再次回到米仓山山前,巨厚的前渊凹陷沉积指示了米仓山冲断带的主要活动时期;白垩纪末—古近纪的前渊凹陷则跃迁至雅安—名山地区。川西前陆盆地的同造山沉降中心以四川盆地中心为核心在西部和北部呈弧形迁移,沉积序列不断更替和叠加。中生界各构造层底界构造图显示现今的构造低部位位于川西北地区和川西南地区,在川西北地区均有东西走向的等值线分布,而川西南地区等值线走向则为北东-南西向。因此分析认为,晚侏罗世至早白垩世的构造变形可能控制了川西盆地现今的地层变形,形成了川西北地区的南北向构造挤压结构,而晚期的新生代构造变形则主要体现在川西盆地的西南部,形成北东-南西向的地层展布特征。     

我国陆上大中型气田分布规律与有利勘探区带优选

“八五”、“九五”期间我国天然气探明储量幅度增长,大中型气田分布规律的深化研究密切关系到天然气储量的增长势头。克拉通盆地下层序古隆起控气理论和上层序非构造圈闭控气机理是克拉通大中型气田富集分布的基本规律,前陆盆地是我国富气盆地类型之一,其冲断带下盘大型造圈闭群、前缘斜坡岩性尖灭区带与浅层次生气藏、前缘隆起上的断块圈闭群等是该类盆地有利的天然气富集区带。依据充分的地质资料,结合我国天然气勘探实际,提     

岩石圈中热压系数的计算

中国中西部地区发育众多前陆冲断带,它们具有构造变形复杂、油气潜力大和有别于经典前陆盆地的沉积和油气地质特征,但其成因过程和动力学并不清楚。文中利用中西部盆地区的地温、岩石热物性参数和地热学模拟技术,分析该区岩石圈热状态和流变学特征,进一步结合其他地质、地球物理资料,揭示盆地区的深部构造特征和岩石圈性质。研究表明,中西部各主要盆地的岩石圈具有厚度大、强度高、地温低等热-流变学特征,表现为刚硬块体;而其周缘和造山带区却表现为温度高、强度低和厚度小等特征,是构造变形的易发区。在此基础上讨论了岩石圈性质和变形过程等深部构造对前陆盆地成因演化的控制作用,进而初步归纳这类陆内再生前陆盆地的成因演化机制:发育于小型克拉通块体的边缘,其就位受控于岩石圈热-流变学非均质性和构造继承性,其动力来源是新生代印度-欧亚大陆碰撞及其持续的挤压作用。上述研究为探讨中国中西部地区的前陆盆地成因机制提供了深部资料和岩石圈热-流变学约束。     

准噶尔盆地西北缘走滑断层特征及油气地质意义

准噶尔盆地西北缘前陆冲断带构造样式复杂多样,除规模较大的逆断层外,还发育一系列北西向的走滑断层。以高分辨率三维地震资料为基础,对断裂体系分析表明克拉玛依—百口泉地区的走滑断层可分为花状走滑断层和简单走滑断层两类,二者在成因、剖面特征等方面具有明显差别。研究结果认为走滑断层对油气的运聚成藏具有重要的双重控制作用,即能作为有效的运移通道,又能够起遮挡作用而形成圈闭。     

祁连山南部地区三叠纪弧后前陆盆地——基于沉积填充与大地构造的证据

本文通过对祁连山南部地区三叠纪沉积充填特征的研究,建立了盆地形成过程中沉积充填与区域构造演化的关联。依据沉积充填特征、构造接触关系及区域地质背景,认为祁连山南部地区三叠纪盆地具有弧后前陆盆地的构造属性;综合分析年代学、沉积物性和盆地内部填充单元的差异划分出与柴达木岛弧带和祁连山南部弧后前陆盆地相关的区域大地构造单元。认为早三叠世-中三叠世中期,南部遭受俯冲作用持续向北挤压推覆导致盆地挠曲沉降;中三叠世中期-晚三叠世中期发生弧(东昆仑-柴北缘)-陆(巴颜喀拉地块)碰撞,祁连山南部盆地挠曲沉降增大,其间形成区域性断裂和不整合等盆地记录的地质事件;晚三叠世晚期祁连山南部盆地发生过补偿陆相填充,弧后前陆盆地消亡。     

杨山晚古生代沉积盆地成因类型及其与桐柏-大别造山带关系的探讨

杨山晚古生代沉积盆地位于桐柏-大别山北麓,它具有明显的前陆盆地沉积特点,由早期(D₂?—C₁)的复理石建造到晚期(C₁—P?)的磨拉石建造;古生物地理分析表明其与华北、扬子陆块都有密不可分的联系,其间不可能有古洋盆的存在,因而它应当是桐柏一大别造山带碰撞造山过程中形成的前陆盆地。杨山晚古生代前陆盆地的形成说明,扬子陆块和华北陆块的陆-陆碰撞起始于晚泥盆世之前(S₃—D₂),而桐柏-大别造山带中生代的构造事件则可能代表一次大规模陆内逆冲-推覆作用。     

大别山造山带前陆深地震反射剖面

在大别山南部和扬子地块前陆实施的深地震反射剖面(140 km)揭示出大别山造山带前陆地壳的精细结构。总体北倾的地壳内部结构与向北缓倾的叠瓦状莫霍面反射揭示出扬子陆块向北俯冲的行迹。莫霍面向北插入大别山造山带下与南大别山地壳内南倾反射震相叠置,构成交叉反射图像,刻画出扬子前陆与大别山造山带的碰撞构造面貌。