应用ATA的对数周期馈源方案于FAST的可能性探讨

介绍应用于美国凤凰计划的Allen望远镜阵(ATA)的对数周期馈源(LPA)概况，初步给出此种馈源的基本参数及性能，仿真估算了其驻波比和方向图，并结合正在进行中的我国500m孔径球面射电望远镜(FAST)计划，探讨了应用这种宽带馈源的可能性及其限制。     

The FAST/SKA site selection in Guizhou province

Many karst depressions with diameters of 300 m to 500 m, suitable for constructing Arecibo-style radio telescopes, were identified in the south of Guizhou Province by Remote Sensing (RS) and Geographic Information System (GIS) technologies together with field investigations. Fundamental topography and landform databases were established for 391candidate depressions, and using GIS the3-dimensional images of depressions, at a scale of 1:10000, were then simulated to fit a spherical antenna. This revised version was published online in July 2006 with corrections to the Cover Date.     

An improved two-step soil-structure interaction modeling method for dynamical analyses of offshore wind turbines

The detailed modeling of soil-structure interaction is often neglected in simulation codes for offshore wind energy converters. This has several causes: On the one hand, soil models are in general sophisticated and have many degrees of freedom. On the other hand, for very stiff foundations the effect of soil-structure interaction could often be discounted. Therefore, very simple approaches are utilized or the whole structure is assumed to be clamped at the seabed. To improve the consideration of soil-structure interaction, a six-directional, coupled, linear approach is proposed, which contains an implementation of soil-structure interaction matrices in the system matrices of the whole substructure. The aero-hydro-servo-elastic simulation code FAST has been modified for this purpose. Subsequently, a 5 MW offshore wind energy converter with pile foundation is regarded in two examples.     

FAST望远镜40米模型天文观测软件的开发

针对FAST的天文观测要求,对其天文观测软件进行了设计与开发。首先介绍了FAST天文观测的原理,对天文观测软件进行了需求分析。而后提出了馈源天文运动轨迹规划算法,并进行了仿真。针对其轨迹要求给出了控制方法,对天文观测控制软件进行了设计与实现。最后通过现场实地实验,验证了本文所提的算法与软件的可行性。     

基于FAST和SURF的遥感图像自动配准方法

提出了基于加速分割检测特征(features from accelerated segment test,FAST)和加速鲁棒性特征(speeded - up robust features,SURF)的遥感图像自动配准方法.首先对参考图像与待配准图像进行HSI变换和高斯金字塔建立;然后检测并提取FAST角点,计算各角点的SURF描述子,用K-D树匹配搜索策略得到2幅图像的匹配点对;再使用最小二乘迭代法剔除错误匹配点并拟合几何变换系数;最后执行几何变换,得到配准后的图像.将该方法分别与基于SURF自动配准方法和ENVI软件中自动获取配准点的方法进行对比实验,结果表明,利用该方法能够获得更多的匹配点对,具有更高的几何配准精度,但在尺度不变性方面略逊于SURF算法.     

Estimation of crowd density from UAVs images based on corner detection procedures and clustering analysis

With rapid developments in platforms and sensors technology in terms of digital cameras and video recordings, crowd monitoring has taken a considerable attentions in many disciplines such as psychology, sociology, engineering, and computer vision. This is due to the fact that, monitoring of the crowd is necessary to enhance safety and controllable movements to minimize the risk particularly in highly crowded incidents (e.g. sports). One of the platforms that have been extensively employed in crowd monitoring is unmanned aerial vehicles (UAVs), because UAVs have the capability to acquiring fast, low costs, high-resolution and real-time images over crowd areas. In addition, geo-referenced images can also be provided through integration of on-board positioning sensors (e.g. GPS/IMU) with vision sensors (digital cameras and laser scanner). In this paper, a new testing procedure based on feature from accelerated segment test (FAST) algorithms is introduced to detect the crowd features from UAV images taken from different camera orientations and positions. The proposed test started with converting a circle of 16 pixels surrounding the center pixel into a vector and sorting it in ascending/descending order. A single pixel which takes the ranking number 9 (for FAST-9) or 12 (for FAST-12) was then compared with the center pixel. Accuracy assessment in terms of completeness and correctness was used to assess the performance of the new testing procedure before and after filtering the crowd features. The results show that the proposed algorithms are able to extract crowd features from different UAV images. Overall, the values of Completeness range from 55 to 70 % whereas the range of correctness values was 91 to 94 %.     

FAST射电望远镜天文轨迹规划

针对我国500 m球面射电望远镜天线(FAST),提出了一体化天文轨迹规划;给出了详细的数学模型及推导分析。相对于当前采用的FAST轨迹规划,该方法使得馈源位置和反射面位置的控制误差可以相互补偿。指出当馈源系统和反射面系统具有相同的测控延迟误差时,并不影响FAST天线的性能。     

基于FAST和BRIEF的密度聚类图像匹配算法改进

FAST(Features From Accelerated Segment Test)特征检测算法是通过邻域像素比较来确定特征点,运算简单,同时采用BRIEF(Binary Robust Independent Elementary Features)算子进行二值化特征描述,可有效降低数据复杂度,提高匹配速度。因此,结合FAST和BRIEF算法,对截取的图像感兴趣区域(ROI)进行特征点提取,在减少数据量的基础上保证了图像特征点的快速获取与匹配;同时,利用机器学习中的密度聚类(DBSCAN),将暴力匹配特征点对的角度和距离作为二维数据样本集进行簇分类,优化改进匹配结果,有效提高匹配精度。通过实验比对改进结果与RANSAC(Random Sample Consensus)错误剔除算法,表明该方法提取速度快、匹配精度高。     

浮式风机极限载荷与疲劳载荷对比分析

根据IEC61400-3设定工况,采用NREL开发的5 MW风机基础模型,应用FAST,以Aero-Hydro-Servo-Elastic耦合仿真技术对风机进行研究。对时域仿真得到的短期载荷,应用分块极大值法联合Gumbel分布外推计算风机极限载荷;以雨流计数法、线性累积损伤理论和S-N曲线为理论基础应用MLife软件,计算风机疲劳载荷。对比分析不同工况下浮式风机、近海单桩风机和陆上风机的极限载荷与疲劳载荷,进而探讨影响浮式风机动态响应的因素。结果表明,对于陆上风机和近海单桩风机,风是其主要载荷来源;而波浪是浮式风机主要载荷来源。对风机进行设计要根据特定海域统计的海洋气候条件,避免风机及其支撑结构的固有频率与波浪频率近似而产生共振;风机制造装配在一定误差范围内,质量不平衡对风机载荷几乎没有影响。