高能偏振能量色散X射线荧光光谱仪应用现状和进展

对高能偏振能量色散X射线荧光光谱仪基本特点及其用于环境、生物、地质样品中痕量元素的分析和RoSH检测等领域的应用现状予以介绍,并对二次靶与滤光片在痕量元素分析中的应用作了探讨。     

XEPOS型偏振能量色散X射线荧光光谱仪分析蒙古铁矿石

以熔融玻璃片和粉末压片制样,采用XEPOS型偏振能量色散X射线荧光光谱仪,建立了铁矿石中总铁、氧化钙、氧化镁、二氧化硅、三氧化二铝、硫、磷、铜等组分的快速分析方法。着重讨论硫、磷两元素测定的可行性和Lucas-Tooth、Price数学校正模型的适应性和改善方法的途径。     

GYD-300型全液压动力头工程钻机的研制

GYD-300型全液压动力头工程钻机为全液压驱动,动力头反循环式机型。液压系统采用插装阀集成结构,电液复合操作。使用PC控制监测系统,适时检测孔底各相关压力,对不同地层进行范围设置,实现钻进过程中孔底的自动、手动恒压钻进。重点介绍了该钻机的结构特点、实验情况、主要技术参数等。     

全液压多功能登船梯介绍

舟山群岛岙山五万吨级油码头使用的全液压登船梯，具有提升、变幅、回转和调位四大功能，文章还对液压系统，电器系统的特点作了介绍。     

高位瓦斯抽放钻孔在降低综采工作面瓦斯浓度中的应用

林南仓属于低瓦斯矿井,但存在高瓦斯区域。煤层和采空区是瓦斯的主要来源,尤以采空涌出量大,给煤矿生产和安全带来了极大隐患。通过在1129综采工作面风道施工高位瓦斯孔,把钻孔打到采空区一侧煤层顶板以上冒落裂隙带内,用钻孔进行瓦斯抽放,使采空内的瓦斯通过裂隙带沿钻孔抽出,有效降低综采工作面瓦斯浓度,保证综采工作面正常回采和安全生产。     

新疆盐渍土分散性研究

通过研究分析盐渍土及改变盐渍含量对分散性试验的影响,认为土块试验、针孔试验对受高钠离子影响的盐渍土分散性评价是较为有效的方法。新疆土料石膏发育,环境水中Ca2+离子丰富,分散性评价最好在工程实际情况下进行。     

能量色散X射线荧光光谱法测定卤水中痕量溴铷砷

用模拟卤水建立了能量色散X射线荧光光谱法测定卤水中溴、铷、砷痕量元素含量的方法.实验表明,方法可以直接取样测定,适用于大批量样品的测试分析.方法的精密度RSD(n＝15)小于1%,加标回收率为86.8%～101.6%.卤水中溴、铷、砷的测定结果与比色法、原子吸收和原子荧光法结果相符.     

北京市春夏季大气气溶胶的单颗粒分析表征

采集了北京市2000年春夏季大气气溶胶样品5个，采用扫描电镜X射线能谱技术分析大气气溶胶单颗粒约2500个。研究结果表明，沙尘期间，矿物尘是最主要的颗粒物种类，非沙尘期间，北京市大气气溶胶中主要检出矿物尘和含硫颗粒物。夏季随着颗粒物污染的加重，含硫颗粒物的数目百分数增加。是北京市大气颗粒物污染的重要特征。重点讨论了Ca-S颗粒、K-S颗粒和Ca-K-S颗粒三类典型含硫颗粒物的化学组成和粒径分布特征。数目可观的Ca-K-S颗粒以及其他硫酸盐颗粒的生成与相对湿度和云量等气象条件相关，这些颗粒物可能是云中过程的产物。减少SO2排放，减少含硫颗粒物，对于控制北京市的大气颗粒物浓度水平具有重要意义。     

Analysis of Sediments and Soils by X-Ray Fluorescence Spectrometry Using Matrix Corrections Based on Fundamental Parameters

Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) is widely used for the analysis of soils and sediments using well characterised procedures. However, difficulties can occur with samples such as unknowns containing small amounts of ore materials and samples collected from contaminated sites where trace elemental concentrations can exceed the concentration range for routine analysis. We studied the performance of a commercially available method, based on fundamental parameters (FP) to correct matrix effects. The spectrometer was originally calibrated with elemental or simple compound calibrants. Samples were analysed as pressed powder pellets. Eighteen sediment and soil reference materials, three of them with certified values for some of their constituents, were used to evaluate accuracy, by comparing results with recommended values and their standard deviations (RV ± 2s) or certified values and their confidence intervals (CV ± Cl). When results fell systematically outside these intervals, calibrations were refined with geochemical reference materials. The best agreement of results with recommended and certified values was obtained when the contents of H₂O and C in each sample were included as matrix constituents during calculations. The detection limits of trace elements tended to be relatively high, because the measuring conditions employed were not maximised for sensitivity. The main advantage of the method tested was that it enabled the analysis of samples with high concentrations of trace elements and the determination of elements such as F, Bi, Sb and W, which are not commonly included in quantitative XRF analysis of geological samples.     

CGD-1型大口径全套管冲击抓斗的设计和应用

CGD－1型大口径全套管冲击抓斗主要是配套全套管钻机施工而研制的。该抓斗主要适用于复杂地层的施工。介绍了该抓斗的技术参数、性能特点、主要结构及试验情况。