Analytical investigation of the exact groundwater divide between rivers beyond the Dupuit–Forchheimer approximation

The groundwater divide is a key feature of river basins and significantly influenced by subsurface hydrological processes. For an unconfined aquifer between two parallel rivers or ditches, it has long been defined as the top of the water table based on the Dupuit–Forchheimer approximation. However, the exact groundwater divide is subject to the interface between two local flow systems transporting groundwater to rivers from the infiltration recharge. This study contributes a new analytical model for two-dimensional groundwater flow between rivers of different water levels. The flownet is delineated in the model to identify groundwater flow systems and the exact groundwater divide. Formulas with two dimensionless parameters are derived to determine the distributed hydraulic head, the top of the water table and the groundwater divide. The locations of the groundwater divide and the top of the water table are not the same. The distance between them in horizontal can reach up to 8.9% of the distance between rivers. Numerical verifications indicate that simplifications in the analytical model do not significantly cause misestimates in the location of the groundwater divide. In contrast, the Dupuit–Forchheimer approximation yields an incorrect water table shape. The new analytical model is applied to investigate groundwater divides in the Loess Plateau, China, with a Monte Carlo simulation process taking into account the uncertainties in the parameters.     

Technique for Controlling Spread of Limnotic Oncomelania

Schistosomiasis is a parasitic disease mostly found in areas along the Changjiang River of China. The disease is spread solely through an intermediary named oncomelania, so its spread of schistosomiasis can be controlled by properly designing water intakes which prevent oncomelania from entering farming land or residential areas. This paper reports a successful design process and a new oncomelania-free intake device. The design of the new intake is based on a sound research program in which extensive experimental studies were carried out to gain knowledge of oncomelania eco-hydraulic behavior and detailed flow field information through CFD simulation.     

含沙量对草地坡面径流泥沙沉积和水力特性的影响

通过室内模拟试验,在坡度为3°和9°、流量为20和60L/min条件下研究了不同浓度(0～350kg/m3)含沙水流流经草地的泥沙沉积过程及其水力学特性。结果表明,坡面泥沙沉积量随含沙量的增加而增大,3°时泥沙沉积率与含沙量呈正相关,而9°时沉积率与含沙量呈反势。坡度对泥沙沉积影响显著,而在相同坡度条件下,两种流量试验的泥沙沉积量无明显差异。相同坡面坡上部位流速小于坡下部位,且含沙量对坡面流速影响较小。在相同坡度和流量条件下,水流雷诺数随含沙量的增大而减小。3°时水流阻力系数和曼宁糙率均随含沙量的增加而增大,而9°时含沙量对阻力影响不明显,因此在土壤侵蚀较严重地区进行坡面水文过程演算时需考虑含沙量对缓坡糙率的影响。     

Hydraulic and sedimentary controls on the availability and use of Atlantic salmon (Salmo salar) spawning habitat in the River Dee system, north-east Scotland

The hydraulic and sedimentary characteristics of the spawning habitat of Atlantic salmon (Salmo salar) in tributary and mainstem locations in a river system in north-east Scotland are described. Salmon used spawning sites with a relatively wide range in sediment characteristics, although measures of central tendency were all in the gravel (2–64 mm) size-class. The dominant factor differentiating the sediment characteristics of study sites was the level of fine sediment, which accounted for significant differences between tributary and mainstem samples. The ranges of depth and velocity in areas used for spawning by salmonids were found to be similar in all tributary study sites. However, due to the interdependence of depth and velocity, major differences were observed between tributary and mainstem study sites in that spawning in larger streams tended to be associated with deeper, faster flowing water. Spawning locations were shown to have similar Froude number, despite different sized streams and species of salmonid. Due to its dimensionless nature and significance in characterising flow hydraulics, the Froude number is proposed as a potentially useful variable for describing the habitat of aquatic organisms.     

VORTEX FLOW FIELD IN A SCOUR HOLE AROUND ABUTMENTS

The three-dimensional flow field in a scour hole around different abutments under a clear water regime was experimentally measured in a laboratory flume, using the Acoustic Doppler Velocimeter (ADV). Three types of abutments used in the experiments were vertical-wall (rectangular section), 45° wing-wall (45° polygonal section) and semicircular. The three-dimensional time-averaged velocity components were detected at different vertical planes for vertical-wall abutment and azimuthal planes for wing-wall and semicircular abutments. The velocity components were also measured at different horizontal planes. In the upstream, presentations of flow field through vector plots at vertical / azimuthal and horizontal planes show the existence of a primary vortex associated with the downflow inside the scour hole. On the other hand, in the downstream, the flow field shows a reversed flow near the abutments having a subsequent recovery with a passage of flow as a part of the main flow. The data presented in this p     

地震模拟振动台振动对建筑物中人体的舒适感的影响分析

本文给出了一种地震模拟振劝台振运对建筑物中人体的舒适感影响的分析方法，并结合实例进行了具体分析。文中给出的分析方法和实例计算结果对于地震馆的设计有一定参考价值。     

大气氡测量影响因素探讨

本文介绍了地壳中放射性元素的分布规律及大气中氡的来源，并着重讨论了测量大气氡浓度的影响因素，以便更好地进行放射性环境的评价及防止，避免氡对人体的危害。     

FLOW FIELD IN SCOURED ZONE OF CHANNEL CONTRACTIONS

Experiments were conducted in a laboratory flume to measure the two-dimensional turbulent flow field in the scoured zone of channel contractions under a clear-water scour condition. The Acoustic Doppler Velocimeter (ADV) was used to detect the flow field at different vertical lines along the centerline of uncontracted (main channel) and contracted zones of the channel. The distributions of time-averaged velocity components, turbulent intensity, turbulent kinetic energy, and Reynolds stresses are presented in nondimensional graphical form. The bed shear stresses are computed from the measured Reynolds stresses being in threshold condition within the zone of contraction where bed was scoured. The data presented in this paper would be useful to the investigators for the development of kinematic flow model and morphological model of scour at a channel or river contraction.     

Macropores as preferential flow paths in meander bends

Macropores are subsurface connected void spaces caused by processes such as fracture of soils, micro‐erosion, and fauna burrows. They are common near streams (e.g. hyporheic and riparian zones) and may act as preferential flow paths between surface and groundwaters, affecting hydrologic and biogeochemical processes. We tested the hydrologic function of macropores by constructing an artificial macropore within the saturated zone of a meander bend (open macropore, ‘OM’) and later filling its upstream end (partially filled macropore, ‘PFM’). For each treatment, we injected saline tracer at an upgradient monitoring well within the meander and monitored downgradient hydraulics and tracer transport. Pressure transducers in monitoring wells indicated hydraulic gradients within the meander were 32% higher perpendicular to and 6% higher parallel to the macropore for the OM than for the PFM. Additionally, hydraulic conductivities measured via falling head tests were 29 to 550 times higher along the macropore than in nearby sediment. We used electrical conductivity probes in wells and electrical resistivity imaging to track solute transport. Transport velocities through the meander were on average 9 and 21% higher (per temporal moment analysis and observed tracer peak, respectively) for the OM than for the PFM. Furthermore, temporal moments of tracer breakthrough analysis indicated downgradient longitudinal dispersion and breakthrough tracer curve tailing were on average 234% and 182% higher for the OM, respectively. This suggests the OM enabled solute transport at overall shorter timescales than the matrix but also increased tailing. Our results demonstrate the importance of macropores to meander bend hydrology and solute transport. Copyright © 2012 John Wiley & Sons, Ltd.