Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

广西田阳-那坡县堆积铝土矿分布规律初探

文章试图通过古地理环境、地质构造条件、沉积铝土矿及矿区地貌等因素去初步探讨田阳县-那坡县一带堆积铝土矿优质矿石及含矿率分布的规律性.认为沉积铝土矿及地貌因素是控制该地区堆积铝土矿优质矿石及含矿率分布的主要因素.     

关于改进的Encke方法中参考轨道的选择和校正

对于改进的Ｅｎｃｋｅ方法，选择适当的参考轨道是一个关键．然而，对于人造地球卫星长弧轨道计算，目前所给出的几种参考轨道均需要逐段校正，这将给定轨问题带来附加的复杂性．本文将仔细探讨如何选择参考轨道和减少校正次数．     

重庆地面最高气温与最大风速年极值的渐近分布

利用重庆1951-1990年间地面最高气温和1956-1990年间地面最大风速年极值的记录,采用韦伯分布和耿贝尔分布分别对其渐近分布进行拟合.通过统计推断,找出重庆地面最高气温和地面最大风速年极值遵循的最佳渐近分布--韦伯分布.     

长江中下游地区地下水卤素元素的形成及其分布规律

本文以丰富的实际资料，论证了地下水的卤素元素（F、Cl、Br、I）的形成、含量及其分布规律与含水介质成分、上覆岩土性质、地下水退流条件、氧化还原环境、地下水矿化度之间的关系。根据江汉平原东部区和鄱阳湖区地下水中Br、I元素的调查研究结果及它们形成的控制因素与分布规律，结合长江三角洲南部区水文地球化学环境条件分析对比，指出该区是一个形成Br、I矿泉水的有利地区。     

冰碛扇型砂金矿床特征及其成矿初探

成生于冰碛扇内，经一定的生物、物理、化学成矿作用，以砂金形态分布而富集成矿的金矿称为冰碛扇型砂金矿床。它具有沿造山带一定标高范围成群、成带分布，沉积物为近源且半胶结，砂金呈面状分布，并以粒金、块金为主，具胶状、浑圆状、包块状构造形态，分布极不均匀等特征。冰碛扇型砂金矿床的成矿作用与河成砂金矿床有本质的区别。它的成矿作用模式是：造山带下地壳富含的活化金通过新构造运动活化的断裂运移地表，经地下流体和地表流体的迁移聚集到冰碛扇这一封闭稳定的生物、物理、化学障环境中，主要经高效聚金微生物有机胶体成矿作用沉淀、再生加大形成砂金，逐步富集成矿床。而红色磨拉石建造中风化离解的Ｆｅ，Ｍｎ物质对沉淀环境ｐＨ值起着一定的调节作用。冰碛扇型砂金矿床在我国西部造山带内广泛分布，具有一定的工业价值，是砂金矿床中一重要类型，应予以重视     

广西泥盆纪四射珊瑚的分布与组合特征

广西早泥盆世晚期至晚泥盆世的碳酸盐台地区发育有两个不同的四射珊瑚群落,此二群落都有其各具特点的珊瑚组合系列。其中,在开阔台地相区的四射珊瑚可划分为9个组合带,而在台地边缘相区则可划分为8个组合带。在早泥盆世早、中期,因岩相分异不明显,四射珊瑚仅可划分为3个组合带。因此证明,四射珊瑚的发展演化与沉积相演变有密切的关系。     

The size distribution of trans-Neptunian bodies

The magnitude distribution of the trans-Neptunian bodies composed of the Kuiper Belt Objects (KBOs) and Scattered Disk Objects (SDOs) is determined for absolute magnitudes H?7, using maximum likelihood estimation methods. This is translated into a corresponding size distribution. This gave a differential size index of q=3.966±0.15 for KBOs and q=3.016±0.32 for SDOs. It was found that these two distributions were statistically different. The KBOs were further split into classical KBOs and Plutinos which had indices of q=4.074±0.18 and q=3.301±0.37, respectively. There was no statistical evidence that these are different populations. The classical KBOs were further split and examined for four different semi-major axis ranges and it was found that there was moderate evidence that the entire sample was not well represented by one index. The distribution indices of the SDOs were compared with the distributions of short period comets and found to be similar. It is likely that the scattered disk population is the source of the short period comets.     

THERMAL EFFECTS OF BUILDING′S EXTERNAL SURFACES IN CITY——Characteristics of Heat Flux into and out of External Wall Surfaces

1INTRODUCTIONWiththerecentmodernizationandurbanizationofChi-na,urbanareashavegreatlyincreased, andgiantbuild-ings,especiallythosetallerthan100m,havebeendomi-nantincities,whichhave resultedinthegreatincreaseintheproportionofbuilding'sexternalsurfacetototalurbanarea.Thedifferencesofthermalpropertiesmain-lyinducedbysolarradiationbetweenbuilding'sexter-nalsurfacesareobviousfordifferentexposures,whichcaninevitablyinfluencethedistributionsofairtempera-turenearby,eventheverticaldistributionsofurb…