Regionalization for large area crop estimates by remote sensing

The crop estimates by remote sensing, developing quickly in recent decades, is a up-to-date technique. Regionalization for large area crop estimates by remote sensing, a special applied regionalization, is the foundation of crop estimates in a large area by remote sensing. According to the actual demands of wheat yield estimation by remote sensing and wheat agroclimatic demarcation of China, this paper first puts forward some principles upheld in this regionalization and analyses its main bases. Secondly, it works out the classificatory schemes about the optimum temporal for estimating wheat yield by remote sensing, information sources of space remote sensing and landuse structure in China. Finally, According to the regionalization indices, this study divides the wheat plantable region of China into 14 regions of crop yield estimates and 31 subregions of crop yield estimates.     

Numerical manifold method for dynamic nonlinear analysis of saturated porous media

It is well known that the Babuska–Brezzi stability criterion or the Zienkiewicz–Taylor patch test precludes the use of the finite elements with the same low order of interpolation for displacement and pore pressure in the nearly incompressible and undrained cases, unless some stabilization techniques are introduced for dynamic analysis of saturated porous medium where coupling occurs between the displacement of solid skeleton and pore pressure. The numerical manifold method (NMM), where the interpolation of displacement and pressure can be determined independently in an element for the solution of u–p formulation, is derived based on triangular mesh for the requirement of high accurate calculations from practical applications in the dynamic analysis of saturated porous materials. The matrices of equilibrium equations for the second‐order displacement and the first‐order pressure manifold method are given in detail for program coding. By close comparison with widely used finite element method, the NMM presents good stability for the coupling problems, particularly in the nearly incompressible and undrained cases. Numerical examples are given to illustrate the validity and stability of the manifold element developed. Copyright © 2006 John Wiley & Sons, Ltd.     

A Simulating Experiment in the Process of Soil Erosion on Bare Land in Mt. Tanakami

In order to understand the process of surface erosion and acquire basic data of conditions on hillslope without vege tation, a sprinkling experiment is conducted on a bare slope in Mt. Tanakami in the central part of Japan. Based on the mea surements of runoff, mean soil erosion depth, and sediment yield, etc. , the results suggest the following characteristics in the process of surface erosion in the experimental area. (1) The occurrence of sediment discharge is interrupted; (2) Surface runoff is a saturated overland flow; (3) The mean soil erosion depth is thick compared with other areas in Mt. Tanakami;(4) Sediment discharge process is detachment- limited.     

Effect of Ploughing Depth on the Growth and Yield of Heracleum candicans： a Threatened Medicinal Herb and a Less-explored Potential Crop of the Himalayan Region

This paper examines the effect of ploughing depths （A -- 60 cm, B -- 45 cm and C -- 30 cm） on the growth and yield of Heracleum candicans Wall （Apiaceae）, a threatened medicinal herb of the Himalayan region. This less-explored plant is being suggested as a potential crop for the mountain agriculture. The study was carried out in an orchard in Himachal Pradesh, India at 2500 m altitude, for two successive growth years. During the first year, all plants remained in juvenile state; in the second year, nearly 65 % plants produced flowers only under 60cm ploughing depth. Among its morphological traits, plant height, collar diameter and aboveground flesh weight were found to be strongly correlated （P 〈 0.01） with the belowground biomass during the first year （r =0.968, 0.925 and 0.973, respectively） and during the second year （r=0.945, 0.928 and 0.775, respectively）. Increase in the ploughing depth was significantly correlated （P〈0.01） with all growth parameters, including the belowground dry weight, marketable portion of the produce. The belowground biomass （commercial yield; 16.28 Qt/hec） at depth A was about 2.6 and 4.7 times higher than those recorded at depths B and C, respectively. The results clearly justify the importance of deep ploughing and this paper strongly recommends it for economically sustainable cropping.     

STUDY ON GIS FOR YIELD ESTIMATION BY REMOTE SENSING IN JILIN MAIZE BELT

ＳＴＵＤＹ　ＯＮ　ＧＩＳ　ＦＯＲ　ＹＩＥＬＤ　ＥＳＴＩＭＡＴＩＯＮ　ＢＹ　ＲＥＭＯＴＥ　ＳＥＮＳＩＮＧ　ＩＮ　ＪＩＬＩＮ　ＭＡＩＺＥ　ＢＥＬＴＳＴＵＤＹＯＮＧＩＳＦＯＲＹＩＥＬＤＥＳＴＩＭＡＴＩＯＮＢＹＲＥＭＯＴＥＳＥＮＳＩＮＧＩＮＪＩＬＩＮＭＡＩＺ...     

Characterization of the Si:As Blocked Impurity Band (BIB) Detector in Keck's Long Wavelength Spectrometer (LWS)

Keck's Long Wavelength Spectrometer (LWS), is the facility instrument used for imaging and spectroscopy in the wavelength range of 3–28 μm at the Keck Observatory. LWS uses an 128 × 128 Si:As blocked impurity band (BIB) array manufactured by the Boeing Corporation. This paper discusses the method used for optimizing the detector's operating parameters at a temperature of 8.5 K and bias voltage of 1.2 V. A process for characterizing detective quantum efficiency of BIB detectors is also presented. This revised version was published online in July 2006 with corrections to the Cover Date.     

Restricted Three-Body Problem: An Approximation of its General Solution – Part One – the Manifold of Symmetric Periodic Solutions

This paper gives the results of a programme attempting to exploit ‘la seule bréche’ (Poincaré, 1892, p. 82) of non-integrable systems, namely to develop an approximate general solution for the three out of its four component-solutions of the planar restricted three-body problem. This is accomplished by computing a large number of families of ‘solutions précieuses’ (periodic solutions) covering densely the space of initial conditions of this problem. More specifically, we calculated numerically and only for μ = 0.4, all families of symmetric periodic solutions (1st component of the general solution) existing in the domain D:(x ₀ ∊ [−2,2],C ∊ [−2,5]) of the (x ₀, C) space and consisting of symmetric solutions re-entering after 1 up to 50 revolutions (see graph in Fig. 4). Then we tested the parts of the domain D that is void of such families and established that they belong to the category of escape motions (2nd component of the general solution). The approximation of the 3rd component (asymmetric solutions) we shall present in a future publication. The 4th component of the general solution of the problem, namely the one consisting of the bounded non-periodic solutions, is considered as approximated by those of the 1st or the 2nd component on account of the `Last Geometric Theorem of Poincaré' (Birkhoff, 1913). The results obtained provoked interest to repeat the same work inside the larger closed domain D:(x ₀ ∊ [−6,2], C ∊ [−5,5]) and the results are presented in Fig. 15. A test run of the programme developed led to reproduction of the results presented by Hénon (1965) with better accuracy and many additional families not included in the sited paper. Pointer directions construed from the main body of results led to the definition of useful concepts of the basic family of order n, n = 1, 2,… and the completeness criterion of the solution inside a compact sub-domain of the (x ₀, C) space. The same results inspired the ‘partition theorem’, which conjectures the possibility of partitioning an initial conditions domain D into a finite set of sub-domains D i that fulfill the completeness criterion and allow complete approximation of the general solution of this problem by computing a relatively small number of family curves. The numerical results of this project include a large number of families that were computed in detail covering their natural termination, the morphology, and stability of their member solutions. Zooming into sub-domains of D permitted clear presentation of the families of symmetric solutions contained in them. Such zooming was made for various values of the parameter N, which defines the re-entrance revolutions number, which was selected to be from 50 to 500. The areas generating escape solutions have being investigated. In Appendix A we present families of symmetric solutions terminating at asymptotic solutions, and in Appendix B the morphology of large period symmetric solutions though examples of orbits that re-enter after from 8 to 500 revolutions. The paper concludes that approximations of the general solution of the planar restricted problem is possible and presents such approximations, only for some sub-domains that fulfill the completeness criterion, on the basis of sufficiently large number of families.     

Deciphering potential groundwater zone in hard rock through the application of GIS

Remote Sensing and Geographic Information System has become one of the leading tools in the field of hydrogeological science, which helps in assessing, monitoring and conserving groundwater resources. It allows manipulation and analysis of individual layer of spatial data. It is used for analysing and modelling the interrelationship between the layers. This paper mainly deals with the integrated approach of Remote Sensing and geographical information system (GIS) to delineate groundwater potential zones in hard rock terrain. The remotely sensed data at the scale of 1:50,000 and topographical information from available maps, have been used for the preparation of ground water prospective map by integrating geology, geomorphology, slope, drainage-density and lineaments map of the study area. Further, the data on yield of aquifer, as observed from existing bore wells in the area, has been used to validate the groundwater potential map. The final result depicts the favourable prospective zones in the study area and can be helpful in better planning and management of groundwater resources especially in hard rock terrains.     

多传感器观测下带乘性噪声系统的逆向滤波与反褶积融合算法

针对多传感器观测环境下带乘性噪声系统的逆向最优滤波与反褶积融合估计问题 ,本文提出了 1种基于极大似然准则的最优融合算法。该算法中各单传感器间并行计算 ,并且融合中心与单传感器处理中心间无反向通讯 ,因而执行效率较高。仿真表明 ,该融合算法产生的逆向滤波与反褶积比单传感器处理结果有较明显提高