Raman microspectrometry, FT-IR and inclusion characteristics of gem garnets from Tanzania and Madagascar

Chemical composition, Raman microspectrometry, and Fourier transform infrared (FT-1R) and SEM-CL (Cathodluminescence) analyses are carried out for Tanzania and Madagascar garnets for locality identification. Inclusion study was sustained after electron probe microanalysis (EPMA). Needle-like illmenites, apatites and zircons were the most common solid inclusions in Tanzania garnets. Madagascar garnets revealed rutile needles and apatites were also observed, but differences in size, shape and distribution patterns were noticed compared to Tanzania garnets. Tanzania garnets exhibited all types of observable fluid inclusions such as ““ fingerprint““ pattern, called Type Ⅰ-A, liquid-only (L) single phase fluid inclusion, called Type Ⅰ-B and Type Ⅱ-A ( L S), Type Ⅱ-B ( L V) and Type Ⅲ-A (L Sylvite even if all examined garnets from three localities retained ““fingerprint““ features, so called, partially healed fractures, in common. Chemical composition, Raman microspectrometry and Fourier transform infrared (FT-IR) analysis taken turned out to be useful methods for the purpose of this study. Using consequences of SEM-CL and inclusion study, accordingly, the locality identification of gem-quality garnets is capable of being available in further application for other kinds of gemstones.     

Petroleum Hydrocarbon Distribution Features in Water and Sediment off Fujian Shore

This study on the distribution features of petroleum hydrocarbon in water and sedi-ment off the Fujian shore using data obtained from the baseline research on oceanic contamination in Fujian showed that:during the research preiod,petroleum hydrocarbon concentrations in water varied from 5.77μg/L to 37.28μg/L,averaged 14.48 μg/L;was lower in the wet seasson than in the dry season;and was highest in the Minjiang Estuary and Jiulong Estuary in both seasons ,The petorleum hydrocarbon concentrations in shore sediment varied from 14.48 mg/kg to 784.36 mg/kg,averaged 133.3 mg/kg ,and was closely related to sediment types (granularity).     

Fluid and source magma evolution of the Questa porphyry Mo deposit,New Mexico,USA

Combined fluid inclusion microthermometry and microanalysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) are used to constrain the hydrothermal processes forming a typical Climax-type porphyry Mo deposit. Molybdenum mineralisation at Questa occurred in two superimposed hydrothermal stages, a magmatic-hydrothermal breccia and later stockwork veining. In both stages, texturally earliest fluids were single-phase, of low salinity (~7 wt.% NaCl_equiv.) and intermediate-density. Upon decompression to ~300 bar, they boiled off a vapour phase, leaving behind a residual brine (up to 45 wt.% NaCl_equiv) at temperatures of ~420°C. The highest average Mo concentrations in this hot brine were ~500 μg/g, exceeding the Mo content of the intermediate-density input fluid by about an order of magnitude and reflecting pre-concentration of Mo by fluid phase separation prior to MoS₂ deposition from the brine. Molybdenum concentrations in brine inclusions, then, decrease down to 5 μg/g, recording Mo precipitation in response to cooling of the saline liquid to ~360°C. Molybdenite precipitation from a dense, residual and probably sulphide-depleted brine is proposed to explain the tabular shape of the ore body and the absence of Cu-Fe sulphides in contrast to the more common Cu-Mo deposits related to porphyry stocks. Cesium and Rb concentrations in the single-phase fluids of the breccia range from 2 to 8 and from 40 to 65 μg/g, respectively. In the stockwork veins, Cs and Rb concentrations are significantly higher (45–90 and 110–230 μg/g, respectively). Because Cs and Rb are incompatible and hydrothermally non-reactive elements, the systematic increase in their concentration requires two distinct pulses of fluid exsolution from a progressively more fractionated magma. By contrast, major element and ore metal concentrations of these two fluid pulses remain essentially constant. Mass balance calculations using fluid chemical data from LA-ICPMS suggest that at least 25 km³ of melt and 7 Gt of deep input fluid were necessary to provide the amount of Mo contained in the stockwork vein stage alone. While the absolute amounts of fluid and melt are uncertain, the well-constrained element ratios in the fluids together with empirical fluid/melt partition coefficients derived from the inclusion analyses suggest a high water content of the source melt of ~10%. In line with other circumstantial evidence, these results suggest that initial fluid exsolution may have occurred at a confining pressure exceeding 5 kbar. The source of the molybdenum-mineralising fluids probably was a particularly large magma chamber that crystallised and fractionated in the lower crust or at mid-crustal level, well below the shallow intrusions immediately underlying Questa and other porphyry molybdenum deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The sandstone-hosted stratiform copper mineralization at Mwitapile and its relation to the mineralization at Lufukwe, Lufilian foreland, Democratic Republic of Congo

The Lufilian foreland is a triangular-shaped area located in the SE of the Democratic Republic of Congo and to the NE of the Lufilian arc, which hosts the well-known Central African Copperbelt. The Lufilian foreland recently became an interesting area with several vein-type (e.g., Dikulushi) and stratiform (e.g., Lufukwe and Mwitapile) copper occurrences. The Lufilian foreland stratiform Cu mineralization is, to date, observed in sandstone rock units belonging to the Nguba and Kundelungu Groups (Katanga Supergroup).The Mwitapile sandstone-hosted stratiform Cu prospect is located in the north eastern part of the Lufilian foreland. The host rock for the Cu mineralization is the Sonta Sandstone of the Ngule Subgroup (Kundelungu Group). A combined remote sensing, petrographic and fluid inclusion microthermometric analysis was performed at Mwitapile and compared with similar analysis previously carried out at Lufukwe to present a metallogenic model for the Mwitapile- and Lufukwe-type stratiform copper deposits. Interpretation of ETM+ satellite images for the Mwitapile prospect and the surrounding areas indicate the absence of NE–SW or ENE–WSW faults, similar to those observed controlling the mineralization at Lufukwe. Faults with these orientations are, however, present to the NW, W, SW and E of the Mwitapile prospect. At Mwitapile, the Sonta Sandstone host rock is intensely compacted, arkosic to calcareous with high silica cementation (first generation of authigenic quartz overgrowths). In the Sonta Sandstone, feldspar and calcite are present in disseminated, banded and nodular forms. Intense dissolution of these minerals caused the presence of disseminated rectangular, pipe-like and nodular dissolution cavities. Sulfide mineralization is mainly concentrated in these cavities. The hypogene sulfide minerals consist of two generations of pyrite, chalcopyrite, bornite and chalcocite, separated by a second generation of authigenic quartz overgrowth. The hypogene sulfide minerals are replaced by supergene digenite and covellite. Fluid inclusion microthermometry on the first authigenic quartz phase indicates silica precipitation from an H₂O–NaCl–CaCl₂ fluid with a minimum temperature between 111 and 182 °C and a salinity between 22.0 and 25.5 wt.% CaCl₂ equiv. Microthermometry on the second authigenic quartz overgrowths and in secondary trails related to the mineralization indicate that the mineralizing fluid is characterized by variable temperatures (Th = 120 to 280 °C) and salinities (2.4 to 19.8 wt.% NaCl equiv.) and by a general trend of increasing temperatures with increasing salinities.Comparison between Mwitapile and Lufukwe indicates that the stratiform Cu mineralization in the two deposits is controlled by similar sedimentary, diagenetic and structural factors and likely formed from a similar mineralizing fluid. A post-orogenic timing is proposed for the mineralization in both deposits. The main mineralization controlling factors are grain size, clay and pyrobitumen content, the amount and degree of feldspar and/or calcite dissolution and the presence of NE–SW to ENE–WSW faults. The data support a post-orogenic fluid-mixing model for the Mwitapile- and Lufukwe-type sandstone-hosted stratiform Cu deposits, in which the mineralization is related to the mixing between a Cu-rich hydrothermal fluid, with a temperature up to 280 °C and a maximum salinity of 19.8 wt.% NaCl equiv., with a colder low salinity reducing fluid present in the sandstone host rock. The mineralizing fluid likely migrated upwards to the sandstone source rocks along NE–SW to ENE–WSW orientated faults. At Lufukwe, the highest copper grades at surface outcrops and boreholes were found along and near to these faults. At Mwitapile, where such faults are 2 to 3 km away, the Cu grades are much lower than at Lufukwe. Copper precipitation was possibly promoted by reduction from pre-existing hydrocarbons and non-copper sulfides and by the decrease in fluid salinity and temperature during mixing. Based on this research, new Cu prospects were proposed at Lufukwe and Mwitapile and a set of recommendations for further Cu exploration in the Lufilian foreland is presented.     

流体包裹体成分测定的低温相变和显微拉曼光谱分析技术研究进展

论述了包裹体低温分析技术的原理以及进展。传统的流体包裹体低温分析技术是以显微冷冻测温测定无机盐体系为主,目前已发展到应用低温原位拉曼光谱技术对包裹体中的阳离子和阴离子进行定量-半定量分析。油气包裹体原位低温分析技术也取得了较大的突破,对不同成分油气包裹体低温下的相变过程取得了一定的认识,据此对油气包裹体进行分类,推测其主要成分,为油气包裹体计算提供基础参数。     

湖北徐家山锑矿床流体包裹体特征及其意义

文章利用激光拉曼光谱和显微测温学方法,对湖北徐家山锑矿床成矿期的石英、重晶石和方解石中的流体包裹体进行了研究。研究表明,这些矿物中的流体包裹体主要有纯液体包裹体和液体包裹体(气相 液相)2类,其液体包裹体的气相成分为H2O±CO2±N2;石英、重晶石和方解石的均一温度分别为134~258℃、154~259℃和145~230℃,主要集中于150~200℃;流体的盐度w(NaCleq)和密度分别集中于3%~6%和0.90~0.96g/cm3。流体包裹体资料揭示出该矿床为典型的中低温热液锑矿床,其成矿流体为中低温、低盐度、中等密度热液。结合H、O、Sr、Pb同位素等研究结果,进一步推断该成矿热液主要是经深部循环演化的大气降水。     

豫西前河构造蚀变岩型金矿成矿过程中的流体-岩石反应

前河金矿区位于华北地台南缘,赋存在中元古界熊耳群安山岩和英安岩中,矿体受断裂破碎带控制。含矿热液在迁移过程中与围岩发生了广泛的流体-岩石反应而引起热液蚀变。本区石英中有4种类型的流体包裹体,均一温度范围为145～331℃,其中含CO2包裹体的完全均一温度主要分布在中-高温区。成矿流体的密度和压力变化范围分别是0.68～0.94g/cm3和(367.01～896.55)×105Pa。金大量沉淀成矿时的流体特征为:温度213～260℃、密度0.80～0.89g/cm3和压力(502.86～710.57)×105Pa。流体相为SO42->Na >Cl->K 型,CO2/H2O比值及N2、H2S、Ar、C2H6等挥发分的含量明显增高,f(CO2)、f(H2S)、f(CH4)和Eh值增大;f(O2)、f(H2O)和pH值减小。在青磐岩化安山岩的基础上发生的流体-岩石反应是造成本矿床金沉淀成矿的最主要原因。     

中国南方志留系底部优质烃源岩发育的构造-环境模式

我们对宜昌王家湾和张家界三家馆两个剖面的上奥陶统-下志留统剖面的有机碳丰度、有机碳同位素、以及磷和硫元素进行了测定,并结合区域构造背景分析了有机质生产、聚集、保存的有利条件.研究表明,对于下志留统烃源岩而言,对有机质生产的主要贡献来自光合作用,所生成的有机质聚集在陆缘洼地型活动大陆边缘的分隔性盆地中,其有利保存的缺氧条件与冈瓦纳大陆北缘的区域性的缺氧有关.我们认为,扬子克拉通的志留系底部烃源岩与北非的"hot shale"一样,有很大的勘探前景.     

扬子及周缘地区上奥陶统-下志留统烃源岩发育环境及其控制因素

扬子地区下古生界发育了上奥陶统五峰组和下志留统龙马溪组两套有效烃源岩,查清其发育环境及其控制因素具有重要的科学理论和油气勘探意义.晚奥陶世开始,扬子地区进入碎屑岩陆棚演化阶段;五峰期-龙马溪期,扬子地区主体为局限的深水陆棚环境,总体呈现出浅水陆棚、深水陆棚、次深海共存的古地理格局.沉积体系展布和沉积演化主要受扬子陆块与华夏陆块的汇聚作用控制.扬子地区上奥陶统-下志留统烃源岩的形成与生烃母质生物的高生产力和高埋藏率、冰期-冰后期之交的气温快速转暖、海平面快速上升以及粘土矿物在有机质富集保存过程中的赋存驻留作用等密切相关.     

In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.