同震阶变异常的特征与机制分析

本文对徐州地震台JB—72水平摆倾斜仪1988年11月至1989年5月间所记录到的24次同震阶变进行了深入分析,认为:a.造成同震阶变的原因是多方面的,而反应了地球应变场准静态调整的同震阶变才是有价值的价变异常;b.多观测手段的地震台站,同震阶变应该在不止一台仪器上得到响应。     

Experimental and numerical studies of rock salt strain hardening

The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt. It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters assumed constant in the basic law.     

Elastoplastic model with loading memory surfaces (LMS) for monotonic and cyclic behaviour of geomaterials

A new elastoplastic model called loading memory surface based on the critical state concept and the multi‐surface framework is proposed for geomaterials. The model uses a hypoelastic formulation and two plastic mechanisms. The formulations of the model are made in three‐dimensional stress–strain space and work under both monotonic and cyclic loadings. A newly introduced formalism makes it possible to obtain the cyclic response directly from the monotonic loading one. This formalism gives a three‐dimensional generalization of the well‐known Masing rule. The model has been validated against test results of Hostun sand under several conditions: monotonic and cyclic, drained and undrained, tests in compression and in extension, and at different confining pressures and different densities. Copyright © 2014 John Wiley & Sons, Ltd.     

有限圈闭复杂沥青质稠油层钻井难点与对策

中东YD油田为海相碳酸盐岩地层,Kazh地层分布着活跃的非均质沥青质稠油,高压并含有酸性气体,为非目的层,需要钻穿并封隔该层后对下部产层进行开发。由于沥青质稠油层分布不均,孔隙压力不确定,对钻井工程造成了极大的挑战。在一期施工中,3口井由于沥青质稠油的侵入被迫工程弃井,未能实现工程目的。针对此世界性难点问题,开展了沥青质稠油侵入机理实验研究、固化剂研制、控压钻井技术应用等一系列配套工艺技术研究,提出了复杂沥青质稠油层安全钻井技术对策,现场应用取得较好的效果。     

深孔用高钢级绳索取心钻杆分区热处理工艺试验研究

为改善绳索取心钻杆受力工况,延长钻杆使用寿命,满足深孔及特深孔钻探施工要求,开展了对绳索取心钻杆体进行分区热处理工艺的试验研究。试验选用高钢级薄壁管材,通过对钻杆两端300 mm左右的区间内进行盐浴淬火及高温回火处理,保证了调质区域的机械性能,硬度和金相组织均匀性良好,同时热处理过渡带影响区域小。试制加工的特深孔绳索取心钻杆具有两端部螺纹连接段刚性强、杆体中部韧性好的特点。该钻杆在山东莱州西岭村矿区完成了2845.55 m深孔的钻进施工,使用情况良好。     

Stress‐dependent hardening and failure surfaces of dry sand

During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd.     

Ramifications of high in-situ temperatures for laboratory testing and inferred stress states of unlithified sediments – A case study from the Nankai margin

The recovery of drill cores involves changes in pressure and temperature conditions, which inevitably alter the mechanical properties of unlithified sediments. While expansion from unloading after core recovery is well studied, the effects from cooling on standard geotechnical tests are commonly neglected. Along the central portion of the Nankai margin sediments were recovered from high in-situ temperatures of up to 110 °C during IODP Leg 190. So far, the interpretation of the consolidation state of the Lower Shikoku Basin facies (LSB) entering the accretionary Nankai margin is ambiguous. Results from laboratory consolidation tests at room temperature show high pre-consolidation stresses. These were interpreted as hardening caused by cementation, while the field-based porosity vs. depth trend points towards normal consolidation. As an explanation for this discrepancy, the change of the mechanical properties by cooling from in-situ to laboratory conditions is proposed. In this paper, the results of a thermo-mechanical model are compared to published field data. This comparison suggests that the observed hardening is at least partially an artefact from cooling during core recovery, and that the strata may be considered normally consolidated to slightly overconsolidated. The latter can be explained by minor cementation or the influence of secondary consolidation. The results suggest that cooling from high in-situ temperatures may be important for the interpretation of the consolidation state of other sedimentary successions elsewhere.     

Development in modeling cyclic loading of sands based on kinematic hardening

In this paper, there is presented an elastoplastic constitutive model to predict sandy soils behavior under monotonic and cyclic loadings. This model is based on an existing model (Cambou‐Jafari‐Sidoroff) that takes into account deviatoric and isotropic mechanisms of plasticity. The flow rule used in the deviatoric mechanism is non‐associated and a mixed hardening law controls the evolution of the yield surface. In this research the critical state surface and history surface, which separates the virgin and cyclic states in stress space, are defined. Kinematic hardening modulus and stress–dilatancy law for monotonic and cyclic loadings are effectively modified. With taking hardening modulus as a function of deviatoric and volumetric plastic strain and with defining the history surface and stress reversal, the model has the ability to predict the sandy soils' behavior. All of the model parameters have clear physical meanings and can be determined from usual laboratory tests. In order to validate the model, the results of homogeneous tests on Hostun and Toyoura sands are used. The results of validation show a good capability of the proposed model. Copyright © 2009 John Wiley & Sons, Ltd.     

描述饱和黏性土应变软化的弹塑性双面模型

常规三轴压缩试验中具有较强结构性的黏性土在围压较低时其应力−应变关系会呈现应变软化现象,一般还伴有塑性变形,通常土体内部结构损伤是应变软化产生的主要原因。考虑到采用经典塑性理论描述材料的应变软化不仅会违背 Drucker 的稳定性假设,而且也不能描述卸载塑性。因此,基于修正剑桥模型及 Li 和 Meissner 提出的塑性硬化准则,建立了一个描述饱和黏性土不排水应变软化的弹塑性双面模型。该模型以应力−应变曲线的峰值点分界,将应变硬化和应变软化分别作为独立的加载事件进行分析,同时引入新的结构性参数表征剪切过程中土体结构损伤导致的塑性刚度衰退。对不同固结状态饱和结构性黏土的三轴固结不排水压缩试验结果的模拟表明,所建模型能够较好地描述饱和黏性土的不排水应变软化特性。