高精度直升机机载LiDAR在高速公路改扩建勘测中的应用可行性研究

机载LiDAR在公路勘测方面的用途日益广泛。该文对直升机机载LiDAR在高速公路改扩建中的应用技术路线可行性进行了研究论证,从地面控制测量、点云数据获取、点云数据处理、成果应用等多个方面进行了阐述,通过分析LiDAR点云数据在5种不同地面控制点布设方案校正下的点云数据精度,论证了利用地面控制点对直升机机载LiDAR点云数据进行平面和高程校正的可行性。     

Analytical study of ground motion caused by seismic wave propagation across faulted rock masses

Studying seismic wave propagation across rock masses and the induced ground motion is an important topic, which receives considerable attention in design and construction of underground cavern/tunnel constructions and mining activities. The current study investigates wave propagation across a rock mass with one fault and the induced ground motion using a recursive approach. The rocks beside the fault are assumed as viscoelastic media with seismic quality factors, Q_p and Q_s. Two kinds of interactions between stress waves and a discontinuity and between stress waves and a free surface are analyzed, respectively. As the result of the wave superposition, the mathematical expressions for induced ground vibration are deduced. The proposed approach is then compared with the existing analysis for special cases. Finally, parametric studies are carried out, which includes the influences of fault stiffness, incident angle, and frequency of incident waves on the peak particle velocities of the ground motions.     

Census survey approach to quantifying īnanga spawning habitat for conservation and management

Here, we describe a methodology for quantifying the spawning habitat of īnanga (Galaxias maculatus), a protected native fish species. Our approach is demonstrated with a survey of the Heathcote/ōpāwaho following the Canterbury earthquakes that produced unexpected findings. Spawning habitat was detected over a 2.5?km reach and the area occupied by spawning sites (75m²) was much larger than in previous records (ca.?21m²). Sites dominated by the invasive Phalaris arundinaceae were found to support high egg numbers. Spawning has not previously been recorded on this species and it is identified in the literature as a threat to spawning habitat. Considerable spatio-temporal variation was also detected in the location of spawning sites and pattern of egg production. Together, these aspects illustrate the need for a comprehensive survey methodology to reliably quantify spawning habitat. The Heathcote/ōpāwaho example shows the utility of our census approach for achieving this, and supporting habitat conservation objectives.     

Helmert方差分量估计在GPS/GLONASS/BDS组合定位权比确定中的应用

因GNSS系统间观测噪声、轨道精度的差异，采用经验权比进行组合定位难以得到最优结果。基于此，在GPS/GLONASS/BDS组合定位中引入Helmert方差分量估计，对GPS/GLONASS/BDS组合单点定位和基线解算中各系统观测值进行合理定权。实验表明，采用该方法确定的伪距观测值最佳权比为5∶1∶1，相位观测值最佳权比为1∶1∶1，有效提高了GPS/GLONASS/BDS组合定位的精度和可靠性。     

国产高分辨率遥感影像农村公路核查方法及其应用

传统的农村公路核查需要人工实地抽查或通过GNSS设备进行信息采集验核，存在成本高、效率低等问题。遥感影像具有成像范围广、时效性高、成本低、能客观反映现实情况等优点。相比于传统方法，将遥感影像引入农村公路核查，能客观、准确、高效地对农村公路相关信息进行核查。本文基于国产高分辨率遥感影像，结合农村公路遥感核查业务，采用遥感影像道路提取算法，设计并实现了一种农村公路核查方法。将本方法应用于某中部省份农村公路遥感核查业务，实际应用表明该方法能有效提高现有农村公路遥感核查的工作效率。     

基于2 m格网点云数据的高精度DEM制作第三次国土调查坡度图

地形地貌随着时间的推移时刻发生变化，以高精度数字高程模型（EDE）数据制作坡度图，进而计算田坎系数，更精准地进行耕地面积计算及统计。以2 m格网点云数据生成的DEM数据为基础，按照第三次全国国土调查的相关技术要求，根据耕地坡度分级要求进行分级，生成坡度分级栅格数据图。对坡度分级栅格数据图进行矢量化，生成坡度分级矢量化数据。对矢量化数据进行图斑综合、界线平滑、拓扑重建、数据裁切等处理，制作完成调查区域坡度图及相关属性数据制作。并对生产的坡度图成果进行分析，找出不同尺度格网生产的坡度图的技术差异，并对高精度坡度的应用进行了展望。     

针对地质灾害隐患点的无人机航摄像控点布点方案

以陕西省某地质灾害隐患点1∶2000航飞生产任务为背景，本文结合垂直起降式无人机航摄技术特点和地质灾害隐患点区域实际情况，通过详细对比几种无人机航摄像控点布控方案的优劣，研究无人机像控点布设方案对空三加密精度的影响，总结了适用于不同地质灾害隐患点的像控点布设方案。通过本文研究，为今后制定地质灾害隐患点的无人机航摄像控点布设方案提供了参考依据。     

自然资源全要素自适应野外调查框架设计

针对自然资源全要素调查工作中分类标准不同、调查口径不同、调查方法不同，造成的各部门调查软件平台重复开发建设和调查数据结果地理信息特征表达不清晰等问题，本文结合自然资源全要素野外调查工作的实际需要，以山水林田湖草生命共同体为统一对象，构建了自然资源语义化特征模型，提出了表征不同自然资源类型的自适应野外调查方法，实现了灵活性高、性能优异的自然资源调查技术平台，形成了统一的自然资源全要素野外调查框架，可以有效提升多门类自然资源基础调查、专业调查、动态调查的能力与水平，为自然资源治理能力现代化提供了可靠技术保障。     

资源三号和天绘一号卫星影像无控联合平差精度分析

近年来国产卫星传感器类型日益丰富，使用自主可控的国产卫星影像进行生产和研究的需求越来越大，多源国产卫星影像联合平差的精度分析显得尤为重要。本文针对在立体测图生产中，资源三号卫星影像在时相较旧、噪声较大、云覆盖和摄影漏洞等特殊困难的条件下，利用天绘一号卫星影像进行补漏生产的情况，最终分析并验证了两者无控联合平差的可行性和成果精度。