A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

脐带缆螺旋滑移分析及力学性能研究

针对脐带缆内部螺旋层,应用Darboux标架建立螺旋结构空间坐标系,推导弯曲载荷下螺旋结构的局部变形和滑移。考虑螺旋构件间的接触和摩擦作用,建立螺旋结构的受力平衡偏微分方程,并研究螺旋角和摩擦系数对螺旋结构滑移的影响。基于同层螺旋结构本构关系相同假设,将所有螺旋结构力学性能线性叠加,拟合脐带缆整体弯曲刚度。运用建立的理论解析方法,对某双层铠装脐带缆的力学性能进行研究,并与数值模拟结果进行对比验证。对比结果表明,理论解析得到的螺旋滑移结果与数值模拟结果一致,理论解析得到的脐带缆弯曲刚度与数值模拟结果在全滑动阶段比较接近。     

大亚湾浮游植物粒级结构对温排水和营养盐输入的响应*

大亚湾核电站温排水对其邻近海域的生态效应日益突出。文章结合现场调查和室内模拟实验, 研究了夏季和冬季大亚湾海域沿温排水温度梯度的浮游植物粒径结构特征, 探讨了营养物质的输入可能对其产生的影响, 以期深入了解浮游植物对升温以及富营养化作用的响应机制。结果表明, 适温条件对浮游植物的生长起促进作用, 在极高温(36.0℃)环境下则产生抑制作用, 在排水口邻近高温区夏季和冬季浮游植物叶绿素a含量均呈较低分布。交互模拟实验发现不同季节浮游植物对于温度和营养盐的敏感性存在差异, 夏季营养盐对浮游植物生长的促进作用比温度明显, 冬季温度的作用则更为显著。现场观测和模拟实验均显示, 水温升高和营养盐加富均可造成小粒级浮游植物 (<20μm)所占比例的增加; 因此, 升温和营养盐输入均可能导致浮游植物粒级结构呈小型化趋势, 并对食物网能量流动与物质循环、生态系统的结构稳定性以及海洋渔业的产量造成潜在影响。     

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.     

Spatial patch structure and adaptive strategy for desert shrub of Reaumuria soongorica in arid ecosystem of the Heihe River Basin

In many arid ecosystems, vegetation frequently occurs in high-cover patches interspersed in a matrix of low plant cover. However, theoretical explanations for shrub patch pattern dynamics along climate gradients remain unclear on a large scale. This context aimed to assess the variance of the Reaumuria soongorica patch structure along the precipitation gradient and the factors that affect patch structure formation in the middle and lower Heihe River Basin (HRB). Field investigations on vegetation patterns and heterogeneity in soil properties were conducted during 2014 and 2015. The results showed that patch height, size and plant-to-patch distance were smaller in high precipitation habitats than in low precipitation sites. Climate, soil and vegetation explained 82.5% of the variance in patch structure. Spatially, R. soongorica shifted from a clumped to a random pattern on the landscape towards the MAP gradient, and heterogeneity in the surface soil properties (the ratio of biological soil crust (BSC) to bare gravels (BG)) determined the R. soongorica population distribution pattern in the middle and lower HRB. A conceptual model, which integrated water availability and plant facilitation and competition effects, was revealed that R. soongorica changed from a flexible water use strategy in high precipitation regions to a consistent water use strategy in low precipitation areas. Our study provides a comprehensive quantification of the variance in shrub patch structure along a precipitation gradient and may improve our understanding of vegetation pattern dynamics in the Gobi Desert under future climate change.

     

张力腿平台筋腱支撑浮筒结构设计研究

在张力腿平台筋腱与海底桩基连接后,需要筋腱支撑浮筒为筋腱提供足够的浮力,保证筋腱在平台运抵工作海域之前不会发生倾覆。针对南海油田自主研发的张力腿平台筋腱实际尺寸及设计要求,设计了适用于1 061 mm(40英寸)筋腱、500米水深的张力腿平台筋腱支撑浮筒,并对筋腱支撑浮筒主要受力进行了分析计算,根据所计算的载荷情况对关键部件进行了有限元仿真分析,验证了结构强度的可靠性,并得到了结构的应力集中点与最大变形点,为筋腱支撑浮筒的结构设计提供了参考。     

Otolith microchemistry indicates regional phylopatry in the larval phase of an amphidromous fish (Gobiomorphus hubbsi)

Knowledge of stock structure is key for the effective management of any fish species. Amphidromous fish, which live and spawn in freshwater but spend a pelagic larval period at sea, have typically been assumed to disperse widely during their larval phase, resulting in populations being sourced from a single unstructured larval pool. We used otolith microchemical analysis to examine the stock structure of bluegill bully (Gobiomorphus hubbsi), a declining amphidromous eleotrid endemic to New Zealand, along the west coast of South Island, New Zealand. Some drainages – even those in close proximity (c. 20?km) – were readily distinguishable based on otolith trace element concentrations, while little structure was evident between other geographically disparate locations. These results indicate that, at least in some cases, locally retained larvae, rather than a single unstructured larval pool, dominates recruitment. Management of bluegill bully and other amphidromous species must therefore consider the possibility of regionally distinct populations.     

浙南近海虾类群落结构及其多样性分析

作者根据2015年11月(秋季)、2016年2月(冬季)、2016年5月(春季)和2016年8月(夏季)对浙南近海进行的渔业资源调查数据,用生物量作为虾类资源分布的数量指标,对该海域虾类的组成、数量分布以及季节变化进行分析。结果显示:该区域共鉴定出虾类30种,隶属于10科21属,以对虾科(Penaeidae)虾类最多,其次为管鞭虾科(Solenoceridae),长臂虾科(Palaemonida)位居第3位。按季节来看,秋季共鉴定虾类27种,各站位平均生物量为6.97 kg/km2,优势种为凹陷管鞭虾(Solenocera koelbeli)、中国毛虾(Acetes chinensis)和中华管鞭虾(Solenocera crassicornis)等3种;冬季鉴定出虾类25种,平均生物量为1.65 kg/km2,优势种为凹陷管鞭虾、扁足异对虾(Atypopenaeus stenodactylus)、日本鼓虾(Alpheus japonicus)、鲜明鼓虾(Alpheus digitalis)、中国毛虾、中华管鞭虾和周氏新对虾(Metapenaeus joyneri)等7种;春季20种,平均生物量为2.22 kg/km2,优势种为戴氏赤虾(Metapenaeopsis dalei)、东海红虾(Metapenaeopsis dalei)和中华管鞭虾等3种;夏季16种,平均生物量为10.36 kg/km2,优势种有鹰爪虾(Trachysalambria curvirostris)和中华管鞭虾等2种。Margalef丰富度指数(D)、Shannon-Wiener多样性指数(H′)和Pielou均匀度指数(J′)秋季均低于冬季。秋冬季受到浙闽沿岸流影响,温度、盐度相对较低,夏季受到台湾暖流外侧影响,温度、盐度相对较高,且各季节间由于瓯江、椒江、飞云江、鳌江等陆源性冲淡水的影响,盐度、温度变化相对较大,使得该区域的物种不得不适应一个跨度较大的温盐范围,广温广盐性种类为主。