青州市表层土壤元素地球化学组合特征研究

聚类分析和因子分析可以获得土壤元素地球化学组合特征及其差异性。对青州市表层土壤样品数据进行分析研究,通过聚类分析,绘制表层土壤元素聚类谱系图,将23种元素或指标分为5个元素组合簇群及2个单元素簇,研究各元素间的组合特征,探讨其相关性、聚集性及其指示意义;通过因子分析,找出有代表性的因子,用其代表变量,绘制典型因子得分等值线图,并从中分析不同元素组合的区域分布基于何种因素,用11个代表性因子的分布特征就基本可以代表青州市表层土壤23项原始变量的分布特征,并对F1,F2,F3主因子进行了地质解释。聚类分析与因子分析相结合,利于表层土壤中元素的共生组合特征及其差异性研究,利于对研究区表层土壤异常进行归纳总结。     

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

不同排列方式和间隙比下双圆柱流致振动特性研究

采用基于ALE的流固耦合分析方法,将圆柱体振动模型简化为平面双自由度质量-弹簧-阻尼系统,进行了计算参数无关性分析。对不同θ角和间隙比T下的双圆柱流致振动进行数值模拟,并与单圆柱振动计算结果进行比较,得到了不同θ角和间隙比T下中心圆柱的升阻力系数、流场分布和运动轨迹变化情况。通过分析发现小间隙比下由于两圆柱间的相互干扰,改变了中心圆柱的尾涡结构,导致了升力和阻力系数随不同θ角而发生变化;小间隙比下由于两圆柱间的相互干扰影响,均使中心圆柱的轨迹在不同θ角下发生了较大的变化,顺流向的振动频率与单圆柱振动时相比出现了多倍频,导致其运动轨迹发生了变化。     

微量元素分析在判别沉积环境中的应用——以柴达木盆地西部锶矿区富锶地层为例

沉积岩中的微量元素对沉积环境水介质的变化较为敏感,是研究沉积物沉积时古气候、古环境的有效手段。选取了对沉积环境介质较为敏感的锶(Sr)、钡(Ba)、铜(Cu)、铀(U)、钒(V)、镍(Ni)、钍(Th)等元素作为判别指标,对柴达木盆地西部上新统油砂山组、狮子沟组和更新统七个泉组三套富锶岩层的古气候和古沉积环境特征进行了研究。结果表明,柴达木盆地西部从油砂山组到七个泉组沉积时总体上为干旱的气候环境;湖盆水体的盐度较高,表现为咸水环境,且从油砂山组到七个泉组随着地层变新,盐度有逐渐增大的趋势;油砂山组、狮子沟组和七个泉组沉积时湖盆水体均表现为中等分层、湖水循环较为顺畅的氧化环境。     

Revisiting the existence of an effective stress for wet granular soils with micromechanics

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.     

Developing constitutive models from EPR‐based self‐learning finite element analysis

A constitutive model that captures the material behavior under a wide range of loading conditions is essential for simulating complex boundary value problems. In recent years, some attempts have been made to develop constitutive models for finite element analysis using self‐learning simulation (SelfSim). Self‐learning simulation is an inverse analysis technique that extracts material behavior from some boundary measurements (eg, load and displacement). In the heart of the self‐learning framework is a neural network which is used to train and develop a constitutive model that represents the material behavior. It is generally known that neural networks suffer from a number of drawbacks. This paper utilizes evolutionary polynomial regression (EPR) in the framework of SelfSim within an automation process which is coded in Matlab environment. EPR is a hybrid data mining technique that uses a combination of a genetic algorithm and the least square method to search for mathematical equations to represent the behavior of a system. Two strategies of material modeling have been considered in the SelfSim‐based finite element analysis. These include a total stress‐strain strategy applied to analysis of a truss structure using synthetic measurement data and an incremental stress‐strain strategy applied to simulation of triaxial tests using experimental data. The results show that effective and accurate constitutive models can be developed from the proposed EPR‐based self‐learning finite element method. The EPR‐based self‐learning FEM can provide accurate predictions to engineering problems. The main advantages of using EPR over neural network are highlighted.     

Damage assessment for submarine photoelectric composite cable under anchor impact

The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering.     

Application of micropolar plasticity to post failure analysis in geomechanics

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

Zircon U–Pb age, trace element and Hf isotope composition of Kongling terrane in the Yangtze Craton: refining the timing of Palaeoproterozoic high-grade metamorphism

U–Pb age, trace element and Hf isotope compositions of zircon were analysed for a metasedimentary rock and two amphibolites from the Kongling terrane in the northern part of the Yangtze Craton. The zircon shows distinct morphological and chemical characteristics. Most zircon in an amphibolite shows oscillatory zoning, high Th/U and ¹⁷⁶Lu/¹⁷⁷Hf ratios, high formation temperature, high trace element contents, clear negative Eu anomaly, as well as HREE-enriched patterns, suggesting that it is igneous. The zircon yields a weighted mean ²⁰⁷Pb/²⁰⁶Pb age of 2857 ± 8 Ma, representing the age of the magmatic protolith. The zircon in the other two samples is metamorphic. It has low Th/U ratios, low trace element concentrations, variable HREE contents (33.8 ≥ Lu_N≥2213; 14.7 ≤ Lu_N/Sm_N ≤ 354) and ¹⁷⁶Lu/¹⁷⁷Hf ratios (0.000030–0.001168). The data indicate that the zircon formed in the presence of garnet and under upper amphibolite facies conditions. The metamorphic zircon yields a weighted mean ²⁰⁷Pb/²⁰⁶Pb age of 2010 ± 13 Ma. These results combined with previously obtained Palaeoproterozoic metamorphic ages suggest a c. 2.0 Ga Palaeoproterozoic collisional event in the Yangtze Craton, which may result from the assembly of the supercontinent Columbia. The zircon in two samples yields weighted mean two-stage Hf model ( T _DM2) ages of 3217 ± 110 and 2943 ± 50 Ma, respectively, indicating that their protoliths were mainly derived from Archean crust.     

平凉隐伏岩溶水环境同位素研究

地下水资源可持续利用的一个急待解决的重要问题,是对地下水补给和更新能力的评价.利用环境同位素技术研究地下水的补给和可更新性是当前较为新颖的方法之一.在西北干旱、半干旱的隐伏岩溶地区,地下水埋藏条件复杂,常规的地质勘探方法所能提供的水文地质信息有限,环境同位素方法在研究地下水的补给及可更新能力方面发挥了优势,可对传统方法进行补充和验证.其结果表明,研究区隐伏岩溶水形成较早,且有大量现代水的混入,平均混入量为54%.说明区内隐伏岩溶水的补给和更新能力较好.环境同位素分析结果还显示,大岔河隐伏岩溶水为一相对独立、半开放的水文地质单元,其补给来源部分为流域内大气降水、地表水的补给,部分为东南部三道沟岩溶地下水的补给;根据环境同位素EPM模型计算,地下水的滞留时间为36 a.地下水储存量为1.314×108 m3; 储水系数为7.29×10-3.这一结果与传统勘探方法的计算结果基本吻合,说明环境同位素方法的实用性.