Transformation of Lambert Conic Conformal Coordinates from a Global Datum to a Local Datum

This paper treats the problem of how to transform from global datum, for example, from the International Terrestrial Reference System (ITRS), to a local datum, for example, regional or national, for the practical case of the Lambert projection of the sphere or the ellipsoid-of-revolution to the cone. We design the two projection constants n(ϕ₁, ϕ₂) and m(ϕ₁) for the Universal Lambert Conic projection of the ellipsoid-of-revolution. The task to transform from a global datum with respect to the ellipsoid-of-revolution E_A,B² to local datum with respect to the alternative ellipsoid-of-revolution E_a,b², without local ellipsoidal height, is solved by an extended numerical example. Ideas in this paper could be of interest to those working with maps and coordinates transformation from global geodetic datum to local geodetic datum and vice versa, under the Universal Lambert Conic projection, and applicable to precise positioning and navigation, boundary demarcation and determination in the marine environment.     

平均大潮高潮面的科学定位和现实描述

在对平均大潮高潮面进行科学定位的基础上,进一步阐明了我国海岸线(岛屿岸线、明礁、灯塔)起算面的定义。引入了三个国标的定义和沿海五省制定的法律条例的规定,结合东海及其岛屿海岸线不同起算面的计算算例,论证了我国海岸线就是平均大潮高潮面形成的实际痕迹线,并以此作为海陆分界线的科学定位和现实意义,澄清了在这一领域存在的一些异议和模糊认识。同时,并就这一重要的基准面进行现实的描述,以期服务于当前我国沿海经济建设、海域使用管理、海岸带开发和有关专项调查以及海洋测绘事业中。     

GPS测高技术在无验潮水深测量中的应用

应用双频GPS动态后处理高精度定位技术，建立了一套完整的GPS无验潮海洋深度测量作业模式，通过海上试验与传统作业模式作了数值分析比较，结果表明，该作业模式不仅无需验潮，而且能够有效消除传统作业模式中船只动态吃水和涌浪等因素对测量成果的影响，显著提高水深测量成果的精度。     

龙口平均海平面变化原因的研究

本文通过对实测海平面高度的对比，发现龙口平均海平面从１９９１年起有明显的升高趋势。作者猜测此乃龙口在码头扩建后有系统下沉所致。     

2000国家重力基本网与1985国家重力基本网的转换关系研究

分析了2000国家重力基本网与1985国家重力基本网重力点的重合情况,详细讨论了确定两网关系的方法:间接平差法、常数转换法和多项式拟合转换法,并给出了两网的关系结果。     

浅谈工程测量学的发展

对工程测量学的地位和应用领域,通用和专用仪器的发展,在理论和实践上进行了归纳和总结。简要地叙述了工程测量在国内外的发展情况及其发展趋势。     

山区煤田地震勘探中静校正存在的问题及其改进方法

在山区或地表复杂地区进行地震勘探,采用基于地表一致性假设的静校正将会严重影响勘探效果,该影响主要源于地表一致性假设存在着不合理因素。如较高的低速带、巨厚的低速带、基岩裸露、地形起伏较大等。为分析一致性假设静校正偏差产生的原因及大小．构建一地形起伏、基岩出露的复杂模型,通过正演其射线路径,对比其时距曲线与理论时距曲线的差异,以及二者静校正量误差大小。模型分析证实该差异与偏移距、地震波穿透深度及基准面高程之间存在直接的联系,据此提出了改进方法,如浮动基准面校正及分块静校正等。理论模型和实际地震资料试算表明,使用改进的方法可有效改善地震时间刮面同相轴聚焦效果及连续性。     

Global height datum unification: a new approach in gravity potential space

The problem of “global height datum unification” is solved in the gravity potential space based on: (1) high-resolution local gravity field modeling, (2) geocentric coordinates of the reference benchmark, and (3) a known value of the geoid’s potential. The high-resolution local gravity field model is derived based on a solution of the fixed-free two-boundary-value problem of the Earth’s gravity field using (a) potential difference values (from precise leveling), (b) modulus of the gravity vector (from gravimetry), (c) astronomical longitude and latitude (from geodetic astronomy and/or combination of (GNSS) Global Navigation Satellite System observations with total station measurements), (d) and satellite altimetry. Knowing the height of the reference benchmark in the national height system and its geocentric GNSS coordinates, and using the derived high-resolution local gravity field model, the gravity potential value of the zero point of the height system is computed. The difference between the derived gravity potential value of the zero point of the height system and the geoid’s potential value is computed. This potential difference gives the offset of the zero point of the height system from geoid in the “potential space”, which is transferred into “geometry space” using the transformation formula derived in this paper. The method was applied to the computation of the offset of the zero point of the Iranian height datum from the geoid’s potential value W ₀=62636855.8 m²/s². According to the geometry space computations, the height datum of Iran is 0.09 m below the geoid.     

GPS进行长边控制测量分析

采用基准和基准转换模型的不同会导致GPS观测边长与坐标计算边长不一致。因此由GPS测量的WGS－84坐标系向我国的北京54坐标系转换计算时，应尽可能选择参考点作对比分析。若满足精度要求，可采用全国精密参数作转换计算，若不能满足精度要求或达不到实测点的定位精度，可先将边长作高程异常改正，再对起算点作方位改正。     

特定基准下的异常位移诊断

针对地壳运动和变形研究中存在的位移资料的参考基准、异常位移等问题，主要讨论了位移资料特定基准的转换和异常位移诊断的数学模型——特定基准转换模型为七参数相似变换模型，转换保持了变形体内部相对位置关系不变，并使转换后的位移矢量更能体现区域内的相对运动信息；异常位移诊断采用拟准检定法(QUAD)，在选定拟准观测的情况下，使得位移真误差具有明显的分群性；模拟算例结果显示，本文采用的线性变换模型、粗差拟准检定法都表现出很好的效果。