基于圆柱多段拟合的隧道中轴线提取方法研究

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理，并将点云按隧道走向分成不同区段；然后对各区段依据轴线与表面点云法线垂直关系，提取精度较低的中轴线；最后对各区段利用圆柱多段拟合，提取精度较高的中轴线。实验表明，隧道中轴线的提取在一定的采样区间具有较高的稳定性，对直线和弯曲的圆形隧道有良好的适用性，算法可靠，精度较高。     

冲绳海槽轴线地质特征

冲绳海槽位于东海大陆架与琉球岛弧之间，海槽中发育着一系列平行轴向延伸的地堑型正断层。穿越海槽的地震剖面证实了海槽扩张中心的存在，扩张轴沿海槽轴线方向延伸。由于地堑构造中心的扩张速率较大，由某引起的海槽中心下陷的速率大于沉积作用的补偿速率，使海槽中心海底出现明显的下陷。在轴线的大陆坡一侧，陆源沉积占绝对优势；轴线的岛坡一侧，以火山坡碎屑、浮岩、有孔虫软泥为沉积特征。     

Variations of the Kuroshio Axis South of Kyushu in Relation to the Large Meander of the Kuroshio

The characteristics of the Kuroshio axis south of Kyushu, which meanders almost sinusoidally, are clarified in relation to the large meander of the Kuroshio by analyzing water temperature data during 1961–95 and sea level during 1984–95. The shape of the Kuroshio axis south of Kyushu is classified into three categories of small, medium, and large amplitude of meander. The small amplitude category occupies more than a half of the large-meander (LM) period, while the medium amplitude category takes up more than a half of the non-large-meander (NLM) period. Therefore, the amplitude and, in turn, the curvature of the Kuroshio axis is smaller on average during the LM period than the NLM period. The mean Kuroshio axis during the LM period is located farther north at every longitude south of Kyushu than during the NLM period, with a slight difference west of the Tokara Islands and a large difference to the east. A northward shift of the Kuroshio axis in particular east of the Tokara Islands induces small amplitude and curvature of the meandering shape during the LM period. During the NLM period, the meandering shape and position south of Kyushu change little with Kuroshio volume transport. In the LM formation stage, the variation of the Kuroshio axis is small west of the Tokara Islands but large to the east due to a small meander of the Kuroshio. In the LM decay stage, the Kuroshio meanders greatly south of Kyushu and is located stably near the coast southeast of Kyushu. This revised version was published online in July 2006 with corrections to the Cover Date.     

机械设备安装测量检验

介绍了在建筑场地及厂房内部无控制网的情况下,利用精密工程测量的手段和方法,检验校正设备,提高安装精度,解决设备安装后存在的安装定位不精确问题的方法,以满足生产要求。     

Milan: The city of constant renewal

Traditional models of urban development are no longer adequate to describe current metropolitan transformations. These are now at the centre of a debate concerning management and administration. In Italy, delays in resolving problems of urban and metropolitan government, despite the legal framework provided by Law 142/90, have weighed heavily on the larger urban areas of the country: Rome, Naples, Milan, which have not been able to tackle the issue of metropolitan government. Recent legislation, while not providing a pre-defined institutional solution, allows separate administrative districts to collectively establish metropolitan institutions of `variable geometry'. The Milan urban area is not one city, but a system of mutually-dependent cities, linked to each other and the rest of the world by a transport network still requiring much investment. The vitality of its economic structure (especially its small firms) is held back by seriously inadequate infrastructure and low external economic efficiency. The provincial capital may boast `historic centrality' but the most interesting potential for development is to be found on the periphery and in the administrative districts immediately surrounding it, in the recovery of derelict industrial areas and dormitory towns established in the 1950s and 1960s, especially to the north. Recovery of derelict areas, green areas, and better transport links within the urban area and with the outside world are the key elements in the reorganization of `Greater Milan'. In this situation of rapid transformation the most appropriate political strategies involve negotiated planning. This revised version was published online in August 2006 with corrections to the Cover Date.     

高层建筑中轴线点恢复测量

高层建筑物中点恢复的测量方法是在负一层测定该建筑物的中点,再引到四层楼顶,最后重新确定施工放样数据,保证该建筑物的设计要求和施工监测。     

A mixed finite element method for Hele-Shaw cell equations

A new numerical method to solve the system of equations describing two phase flow in a Hele-Shaw cell is presented. It combines a mixed finite element method, the method of subtraction of the singularity and a front tracking grid in a single computational strategy. This choice of discretization techniques is well motivated by the difficulties present in the system of equations and the physics of the problem. The new method was tested against analytical solutions and also by solving the Saffman–Taylor viscous fingering problem for finite and infinite mobility ratios. In both cases convergence under mesh refinement is achieved for the fingers developed from an initial sinusoidal interface. Finger splitting is observed for low values of the surface tension and high mobility ratio. Different explanations, based in our results, are provided for this phenomenon. This revised version was published online in July 2006 with corrections to the Cover Date.     

Stable axisymmetric SPH formulation with no axis singularity

The axisymmetric formulation of the governing equations for geomechanics in the framework of smoothed particle hydrodynamics (SPH) is presented in this study. Two forms of SPH discretization for the motion equations, which are labeled as form I and form II, are proposed, and the methods to compute the hoop stress and strain terms including hoop strain rate and the acceleration introduced by the hoop stress are compared. To avoid possible singularity problem near the axis of symmetry, a perfectly smooth contact along with ghost particles are applied to prevent the real particles from overly approaching the axis of symmetry to remove this potential singularity. In addition, the Mohr–Coulomb constitutive model is implemented into the SPH formulation in describing soil behavior. Four numerical tests are carried out to validate and compare the accuracy and stability of the proposed algorithms, and their results are compared with analytical solutions and results from FEM analysis. The performance in these comparisons suggests that SPH II with hoop terms computed through direct hoop method is more stable than the others, and the adoption of contact for the symmetric axis is efficient in eliminating the singularity problem. Copyright © 2015 John Wiley & Sons, Ltd.     

台湾以东黑潮路径识别与变化规律

为研究对中国台湾以东海域黑潮路径及其变化,本文基于法国空间局AVISO中心提供的1993—2015年的卫星遥感海表流场逐日资料,对121°—125°E,22.4°—25°N海域黑潮路径进行了逐日识别,得到了共计23年累计8400天的台湾以东黑潮流轴的逐日路径,并研究其在不同纬度的流轴位置及其对应的表面黑潮流量的时空变化规律。主要结论如下:(1)采用模糊C-均值聚类法对台湾以东黑潮流轴路径进行聚类分析,发现台湾以东黑潮流轴在24°N以南出现明显摆动,形成正常和偏东两种路径;黑潮流轴存在明显的时间变化,流轴偏东现象年平均大约出现25次,大致每隔3年出现一次偏东较少的现象,各月流轴偏东次数以4、5月最少,10月至次年3月较多;(2)台湾以东黑潮表面流量大小在6.2—8.3×104m2/s之间;总体上来说,纬度越高流量越大,在23.5°N左右范围内存在一个流量低值中心;在24.3°N以北流量总体较大,且增长趋势稳定,同时表面流量大小具有较强的季节和年际变化特征。     

岩石圈中水的临界奇异性——大规模成矿的根源

水的临界奇异性是岩石圈中许多重大地质作用的关键和枢纽,有独特的地质意义、超乎常识。水在临界点发生二级相变,许多物理化学性质奇异性突变,特别是溶解行为和热压的突变,对成矿作用影响极大。