基于J2EE架构的企业卡资源管理系统的设计与实现

介绍了J2EE架构和多层体系结构的发展，在B／S三层架构的基础上给出了包含应用服务器中间件的多层分布式应用体系结构，并把此体系结构应用于电信氽业的有价卡管理系统项目中。分析了此项同的功能结构和体系结构，采用J2EE开发平台和技术设计实现了由浏览器、Web服务器、应用服务器、数据库服务器组成的多层体系架构。     

蛤蜊科3种贝类16SrRNA基因片段及ITS2核苷酸序列分析

利用PCR技术分别扩增连云港及启东沿海蛤蜊科的西施舌（Coelomactra antiquata）、中国蛤蜊（Mactra chinensis）和四角蛤蜊（Mactra veneriformis）3种双壳贝的16SrRNA基因片段和ITS2核苷酸序列．测序后用DNAstar软件分析了核苷酸差异。结果显示：三种贝类16SrRNA基因片段长度相同，均为306bp（去除引物）．核苷酸存在多态性。共有45个变异位点，54个核苷酸发生了变异。全部为碱基置换。西施舌与中国蛤蜊此片段核苷酸的同源性为88．9％．与四角蛤蜊的同源性为88．6％．中国蛤蜊与四角蛤蜊的同源性为90．6％。三种蛤蜊ITS2序列分别为390bp（西施舌）、441bp（四角蛤蜊）和466bp（中国蛤蜊）。存在长度多态性．ITS2核苷酸差异分析结果显示．西施舌与中国蛤蜊的同源性为70．9％-71．1％，西施舌与四角蛤蜊的为70．5％-71．0％。中国蛤蜊与四角蛤蜊的同源性为88．1％-88．8％。ITS2序列分析结果与16SrRNA基因片段分析结果一致．2种分子分析法均显示中国蛤蜊与四角蛤蜊的亲缘关系近。     

REMOTE SENSING FOREST BIOMASS: AN EVALUATION USING HIGH RESOLUTION REMOTE SENSOR DATA AND LOBLOLLY PINE PLOTS

Eight-year-old Loblolly pine (Pinus taeda) plots located in South Carolina were evaluated using high resolution aircraft multispectral scanner data to determine if biomass could be accurately measured. Sixteen pine plots located on both sandy and clay soils were treated with 0, 180, or 360 kg. (approximately 0, 400, or 800 lb.) of nitrogen per plot. Indices of biomass from remote sensing data were significantly correlated with in situ biomass measurements made in each plot. A ratio of infrared (.9–1.1 μm) and red (.65–.70 μm) channels yielded the best correlation. The indices were not sensitive to differences in soil type (sandy or clay).     

数字宜昌建设初探

数字地球、数字城市是近几年刚提出来的一个全新的概念 ,但数字城市的建设却以空前的速度向前发展着 ,国务院总理朱熔基在视察宜昌时提出要把宜昌建设成世界级的城市 ,未来的城市数字化程度将是衡量一个城市发达程度的重要指标 ,启动数字宜昌建设是跻身世界级城市 ,提高宜昌市综合竞争力的重要举措     

测绘项目管理实施引论

根据我国测绘生产单位的实际情况 ,测绘项目管理的具体实施大致包括对项目的识别、选定、启动与筹集资金、计划、成本估算、执行计划、控制、收尾等主要步骤。当项目确定后 ,需要启动和筹集资金。而计划是项目管理的基本组成部分 ,包括明确项目目标和工作范围。项目成本估算有因素估算法和利用WBS方法的详细估算。项目质量管理规划的依据有质量目标、范围说明、标准和规范等。     

Some thoughts on pulsation and binarity

Intensive monitoring of main-sequence stars for pulsational studies continuously reveals new binaries and multiple systems. The resulting extensive data sets lead to exact orbital parameters, and to accurate masses of the components. This is also the case higher up the main sequence, though less frequently. We discuss a few examples where intensive observational efforts are necessary in order to improve our knowledge of the pulsational behaviour in the upper main-sequence instability domains, but we emphasize that observational efforts alone that turn out more and more of the same type of data, are by far insufficient, and that there is urgent need for theoretical developments. Determination of highly accurate stellar parameters is of paramount importance and is much more needed than time-series observations.     

Development of the mixed conifer forest in northern New Mexico and its relationship to Holocene environmental change

Chihuahueños Bog (2925 m) in the Jemez Mountains of northern New Mexico contains one of the few records of late-glacial and postglacial development of the mixed conifer forest in southwestern North America. The Chihuahueños Bog record extends to over 15,000 cal yr BP. An Artemisia steppe, then an open Picea woodland grew around a small pond until ca. 11,700 cal yr BP when Pinus ponderosa became established. C/N ratios, δ¹³C and δ¹⁵N values indicate both terrestrial and aquatic organic matter was incorporated into the sediment. Higher percentages of aquatic algae and elevated C/N ratios indicate higher lake levels at the opening of the Holocene, but a wetland developed subsequently as climate warmed. From ca. 8500 to 6400 cal yr BP the pond desiccated in what must have been the driest period of the Holocene there. C/N ratios declined to their lowest Holocene levels, indicating intense decomposition in the sediment. Wetter conditions returned after 6400 cal yr BP, with conversion of the site to a sedge bog as groundwater levels rose. Higher charcoal influx rates after 6400 cal yr BP probably result from greater biomass production rates. Only minor shifts in the overstory species occurred during the Holocene, suggesting that mixed conifer forest dominated throughout the record.     

Sulfur isotope measurement of sulfate and sulfide by high-resolution MC-ICP-MS

We have developed a technique for the accurate and precise determination of ³⁴S/³²S isotope ratios (δ³⁴S) in sulfur-bearing minerals using solution and laser ablation multiple-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). We have examined and determined rigorous corrections for analytical difficulties such as instrumental mass bias, unresolved isobaric interferences, blanks, and laser ablation- and matrix-induced isotopic fractionation. Use of high resolution sector-field mass spectrometry removes major isobaric interferences from O₂⁺. Standard-sample bracketing is used to correct for the instrumental mass bias of unknown samples. Background on sulfur masses arising from memory effects and residual oxygen-tailing are typically minor (< 0.2‰, within analytical error), and are mathematically removed by on-peak zero subtraction and by bracketing of samples with standards determined at the same signal intensity (within 20%). Matrix effects are significant (up to 0.7‰) for matrix compositions relevant to many natural sulfur-bearing minerals. For solution analysis, sulfur isotope compositions are best determined using purified (matrix-clean) sulfur standards and sample solutions using the chemical purification protocol we present. For in situ analysis, where the complex matrix cannot be removed prior to analysis, appropriately matrix-matching standards and samples removes matrix artifacts and yields sulfur isotope ratios consistent with conventional techniques using matrix-clean analytes. Our method enables solid samples to be calibrated against aqueous standards; a consideration that is important when certified, isotopically-homogeneous and appropriately matrix-matched solid standards do not exist. Further, bulk and in situ analyses can be performed interchangeably in a single analytical session because the instrumental setup is identical for both. We validated the robustness of our analytical method through multiple isotope analyses of a range of reference materials and have compared these with isotope ratios determined using independent techniques. Long-term reproducibility of S isotope compositions is typically 0.20‰ and 0.45‰ (2σ) for solution and laser analysis, respectively. Our method affords the opportunity to make accurate and relatively precise S isotope measurement for a wide range of sulfur-bearing materials, and is particularly appropriate for geologic samples with complex matrix and for which high-resolution in situ analysis is critical.     

Occurrence and evolution of the Xiaotangshan hot spring in Beijing, China

Thermal groundwater occurs in bedrock aquifers consisting of the dolomite of the Wumishan Group of the Jixianin System and the Cambrian carbonate in the Xiaotangshan geothermal field near the northern margin of the North China Plain, China. The hot water in the geothermal field of basin-type discharges partly in the form of the Xiaotangshan hot spring under natural conditions. The hot water has TDS of less than 600 mg/L and is of Na·Ca-HCO₃ type. The geothermal water receives recharge from precipitation in the mountain area with elevation of about 500 m above sea level to the north of the spring. Thermal groundwater flows slowly south and southeast through a deep circulation with a residence time of 224 years estimated with the Ra–Rn method. The Xiaotangshan hot spring dried up in the middle of the 1980s owing to the increasing withdrawal of the hot water in the geothermal field in the past decades. The water level of the geothermal system still falls continually at an annual average rate of about 2 m, although water temperature changes very little, indicating that the recharge of such a geothermal system of basin-type is limited. Over-exploitation has a dramatic impact on the geothermal system, and reduction in exploitation and reinjection are required for the sustainable usage of the hot water.