使用模块方式进入系统空间

LINUX，一个优秀的代码开放的操作系统。对其内核代码的分析，无论对编程或者学习操作系统原理都将事半功倍。然而处于安全性考虑，CPU的设计者将系统空间和用户空间分离，这个措施造成了对内核代码进行调试运行的困难。有许多方法可以使用户程序进入系统空间，比如中断方式、系统调用方式……我们介绍的是采用模块的方式使应用程序进入系统空间。     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

STWAVE模型在多岛屿区域波浪要素计算中的应用

我国常用的风推浪计算方法在多岛屿区域波浪要素计算中具有一定局限性。论文通过不同方法计算的波浪要素计算结果的比较,认为STWAVE模型在满足计算精度的前提下,操作简单,方法简便,在多岛屿区域波浪要素计算中具有较大的应用、推广价值。     

On dynamic coupling effects between a spar and its mooring lines

The responses of a spar constrained by slack mooring lines to steep ocean waves and tensions in the mooring lines are simulated using two different numerical schemes: a quasi-static approach (SMACOS) and a coupled dynamic approach (COUPLE). The two approaches are the same in computing wave loads on the structure. Their difference is in modeling dynamic forces of mooring lines; that is the dynamic forces are included in the computation of COUPLE but neglected in SMACOS. The numerical simulation is examined against the laboratory measurements of the JIP Spar in a water depth of 318 m. The dynamic coupling effects between the JIP Spar and its mooring lines in different water depths (318, 618 and 1018 m) are investigated by the comparison of numerical simulations obtained using the quasi-static and coupled dynamic approaches. It is found that the damping of mooring lines reduces the slow-drift surge and pitch of the Spar, especially in deep water. The reduction in the amplitude of slow-drift surge can reach about 10% in a water depth of 1018 m. The tension in mooring lines may greatly increase in the wave frequency range when dynamic forces in mooring lines are considered. The mooring-line tension in the wave frequency range predicted by the coupled dynamic approach can be eight times as great as the corresponding prediction by the quasi-static approach in a water depth of 1018 m. This finding may have important implications for the estimation of the fatigue strength and life span of the mooring lines deployed in deep water oceans.     

组件嵌入式网络地理信息系统的设计与实现

研究了基于组件嵌入式网络GIS解决方案，首先介绍了网络GIS实现的主流Java方法，分析了它们的优缺点，重点论述了嵌入式组件技术和基于组件嵌入式网络GIS的实现原理，介绍了它的设计和实现方法，最后给出了实验结果并和Java实现方式作了比较。     

定位卫星轨道监视系统研究

与卫星测控中心的卫星轨道参数相比,地球同步卫星定位系统中轨道计算子系统所计算出的卫星星历数据具有实时性强、精度高的特点,如何有效利用该星历数据来分析卫星轨道运行情况是该领域的一个热门研究课题。在介绍卫星轨道测定法的基础上,提出了以卫星速度变化率和卫星星下点为主要监视内容的卫星轨道监视系统,通过系统的试运行结果可以看出,该系统能够有效地监视卫星的瞬时和长期运行情况,为卫星的在轨运行管理提供了一种直观、形象的监视方法。     

蚌埠市地理信息系统应用探讨

阐述了GIS系统的设计原则,建设方案,揭示了GIS系统功能模块的效能,利用Map控件建立信息管理系统,最后探讨了GIS系统在应用领域的发展前景。     

地震前兆含义,科学问题与研究途径的研讨

地震前兆的研究已经取得了很大的进展,地震前兆的复杂性引起了广泛的关注,对地震预报、有关科学问题和探索途径的研究现状及其前景有各种评价。文章认为由于一些科学问题没有解决,尽管对中缅边境１９９５年７月连７．３级地震作出了成功预报,经验性预报有一定的局限性,文中讨论了广义地震前兆和狭义地震前兆,广义地震前兆包含二类前兆：场兆和源兆;而狭义前兆仅指后者。大陆震例前兆的系统研究证实了广义地震前兆的存在,然而     

Ductile deformation of garnet in mylonitic gneisses from the Münchberg Massif (Germany)

Mylonitic gneisses from the Münchberg Massif contain single grains (type I) and polycrystalline aggregates (type II) of garnet displaying a distinct elongation parallel to a macroscopic lineation which is interpreted as the result of ductile deformation. Lattice-preferred orientations of quartz (textures) symmetrical to the macroscopic foliation and lineation and the lack of rotational microfabrics indicate that the bulk deformation was pure shear at least during the latest strain increments. Garnet textures measured by EBSD together with microprobe analyses demonstrate that these two structural types of garnet can be related to two different processes of ductile deformation: (1) For the single grains stretching can be attributed to diffusion creep along grain boundary zones (Coble creep). The related mass transfer is indicated by the fact that primary growth zones are cut off at the long faces of the grains while the related strain shadow domains do not show comparable chemical zoning. Pressure solution and precipitation suitable to produce similar structures can be largely ruled out because retrogressive reactions pointing to the presence of free hydrous fluids are missing. (2) For the polycrystalline garnet aggregates consisting of cores grading into fine-grained mantles, dislocation creep and associated rotation recrystallization can be assumed. Continuous lattice rotation from the core to the outer polycrystalline rim allow a determination of the related dominant slip systems which are {100}<010> and equivalent systems according to the cubic lattice symmetry. The same holds for garnets which appear to be completely recrystallized. For this type of fine-grained aggregates an alternative nucleation model is discussed. Due to penetrative dislocation glide in connection with short range diffusion and the resulting lattice rotation, primary growth zones are strongly disturbed.Since for the considered rock unit of the Münchberg Massif peak metamorphic temperatures between 630 and 670 °C can be assumed, this study clearly demonstrates that the inferred processes of ductile garnet deformation can occur not only in HT regimes as often suggested in the literature even if embedded within a matrix of “low-strength” minerals like quartz, feldspars and micas.