黔北遵义团溪铝土矿勘探网密度探讨

以黔北遵义团溪铝土矿后槽矿区一矿块为例,用50m×50m工程间距进行施工成果与100m×50m和100m×100m工程间距施工成果,对其矿体厚度、矿体形态、主要化学成分含量及储量变化进行分析对比,以探寻此类矿床应如何选择工程间距,才能更合理准确地对矿体进行圈定控制,以满足矿山开采设计的要求。通过资料分析对比认为,对黔北喀斯特型沉积铝土矿进行勘查而言,以≤50m×50m工程间距控制矿体并求取储量,效果较为理想。     

云南潞西大矿山铅锌矿

矿体产于花岗岩以上断层附近大理岩中,大理岩与花岗岩接触部位是主要的矿化部位,在大矿山、小石林、灰窑等地见有强褐铁矿化、弱铅锌矿化的厚大矿化层。通过勘查工作,认为矿区具有寻找中-大型规模矿山的前景。     

大理宾川小龙潭斑岩型铜矿

矿体赋存于不同构造过渡带断裂侧,控矿岩石为喜马拉雅期浅成—超浅成相的富钾碱性系列的中酸性侵入体,属于斑岩型铜矿。     

安徽池州铜山铜矿深部找矿实践与启示

铜山铜矿资源储量日益枯竭。危机矿山接替资源勘查中,采用地质、物探综合手段圈定异常区,经深部钻探验证,取得突破。     

大岭子金矿地质特征及选矿浸出率

大岭子金矿V1矿体赋存于中元古界高黎贡山群变质岩中,受韧性剪切带控制,矿石类型以氧化矿石为主。提出选矿依据。     

富宁阳文冲-广南菜子垣热液淋滤卡林型金矿区

金矿区构造活动具有多期性：加里东期及海西期在矿区形成的薄弱角度不整合面、近南北向平行的滑脱断层,是含矿热液的运移、沉淀的通道和空间。金矿床应属地下热液淋滤卡林型金矿床。     

云南永胜宝坪浅源热液改造型铜矿地质及成因

宝坪铜矿赋存于三叠系下统腊美组中。矿体呈似层状,少量脉状,严格受北北西-北西向构造控制。矿床成因类型属浅源热液改造型铜矿床。     

Planation, bauxites and epeirogeny: One or two paleosurfaces on the West African margin?

Mapping of lateritic bauxites over the West African rifted margin and analysis of the geomorphic properties of these bauxites, combined with available geological data lead to a discussion of the presence of either two Meso-Cenozoic planation surfaces or a single Eocene surface to account for the morphotectonic and paleoclimatic evolution of the Guinean landforms. At large scale, two stepped bauxitic levels are documented. Ongoing or episodic uplift following Gondwana breakup and Meso-Cenozoic climate change are proposed to have allowed the formation and abandonment of an Early mid-Cretaceous surface today preserved as the higher bauxitic level, and the setting of an Eocene planation surface bearing a second generation of bauxites, making the lower bauxitic level. The single Eocene surface hypothesis requires that Paleogene bauxitization preserved large pre-existing relief to explain two stepped bauxitic levels of the same age. The two-surface hypothesis is favored because it would explain rebauxitization of alluvial pebbles of bauxites under the lower lateritic level.     

普朗铜矿找矿标志及找矿模型

普朗铜矿矿体形态简单,以铜为主,伴生金、硫等多种有益组份。找矿标志为深大断裂旁侧的次级两组断裂交汇部位;特别是多种岩类的杂岩体,裂隙发育地段;斑岩体靠沟谷部位(负地形)等。土壤化探异常Cu>400×10-6和Mo>10×10-6异常叠加部位;视极化率大于10%的激电异常,磁异常约50～100nT的部位等。初步建立找矿模型,运用该模型,在矿区外围已发现普上、亚杂等一批铜(多金属)矿体,矿化体,具有明显的找矿指导意义。     

云南会泽铅锌矿喷流沉积成因研究

会泽铅锌矿床的成因认识各异,曾认为是沉积—改造层控型矿床。研究前人资料、结合亲历找矿实践,讨论该矿床另一种不同的成矿方式。研究矿床地质、地球化学、同位素组成、包裹体、方铅矿年龄测定和成矿温度测试等表明:会泽铅锌矿属海底热卤水喷流沉积—改造层控型矿床,与芒特—艾萨型热卤水喷流沉积层控矿床类似。