Chrome-spinels in serpentinites and talc carbonates of the El Ideid-El Sodmein District, central Eastern Desert, Egypt: their metamorphism and petrogenetic implications

Serpentinites and talc-carbonate rocks of El Ideid-El Sodmein District (ISD), central Eastern Desert, Egypt, contain variably altered chrome-spinels. Back-scattered electron images and electron microprobe analyses of chrome-spinels and associated silicates are made to evaluate their textural and compositional variations with metamorphism. In most cases the chrome-spinel crystals are concentrically zoned with unaltered cores through transitional zone of ferritchromit to Cr-magnetite toward the rims. In talc-carbonate rocks chrome-spinels are extensively altered to Cr-magnetite. Compared to cores, the metamorphic rims are enriched in Cr# (0.83–1.0 vs. 0.58–0.63 for rims and cores, respectively) and impoverished in Mg# (0.05–0.29 vs. 0.57–0.63), due to Mg–Fe and Al(Cr)–Fe³⁺ exchange with the surrounding silicates during regional metamorphism rather than serpentinization process. Textural and compositional features of the chrome-spinels suggest transitional greenschist-amphibolite up to lower amphibolite facies metamorphism (at 500–600 °C), which is isofacial with the country rocks. The common preservation of unaltered chrome-spinel cores in the serpentinites, contrary to talc-carbonate rocks, implies that full equilibration has not been attained due to small metamorphic fluid–rock ratio. Microprobe analyses profile across a concentrically zoned grain confirms the presence of two compositional (miscibility?) gaps; one between chrome-spinel core and ferritchromit zone; and another one between ferritchromit zone and Cr-magnetite outer rim.Chrome-spinel cores do not appear to have re-equilibrated completely with the metamorphic spinel rims and surrounding silicates, indicating relic magmatic composition not affected by metamorphism. Core compositions suggest an ophiolitic origin and derivation by high degrees of melting of reduced, depleted harzburgite to dunite mantle peridotites in an oceanic supra-subduction zone (marginal-basin) tectonic environment.     

遥感蚀变信息检测中背景与干扰问题研究

在不同自然景观区的遥感蚀变信息检测中,背景与干扰是2个复杂而又容易混淆的研究对象。本文结合光谱混合模型理论与随机变量概率分布相关理论,深入分析了遥感数据的光谱空间几何结构特征(重点剖析二维散点图),系统研究了背景与干扰的关系、复杂度以及干扰地物类型的划分等问题。这些问题的探讨为遥感蚀变信息检测的最佳方案设计和蚀变信息潜在性评价与准确提取提供了技术思路。     

富宁阳文冲-广南菜子垣热液淋滤卡林型金矿区

金矿区构造活动具有多期性：加里东期及海西期在矿区形成的薄弱角度不整合面、近南北向平行的滑脱断层,是含矿热液的运移、沉淀的通道和空间。金矿床应属地下热液淋滤卡林型金矿床。     

云南绿春咪霞金矿成矿地质条件

咪霞金矿赋存在多元素高背景值下志留统薄层状蚀变板岩中,受北西向F6-1断裂及正长岩、煌斑岩控制,与多元素异常、黄铁矿化等多种围岩蚀变对应,具较好的成矿地质条件。     

Mineralogical and chemical transformation of Oldoinyo Lengai natrocarbonatites, Tanzania

The minerals of Oldoinyo Lengai natrocarbonatite lavas are unstable under atmospheric conditions. Subsolidus mineral assemblages in natrocarbonatites were studied in 105 samples from contemporary eruptions ranging from present day to about 100 years old. The subsolidus minerals in natrocarbonatites were formed (i) along cracks on the lava surface from hot gases escaping during cooling, (ii) as atmospheric alteration by solution of water-soluble minerals, in particular halides and gregoryite, and by hydration of nyerereite under the influence of meteoric water and (iii) by reaction with fumarole gases. After solidification, the lavas were cut by a network of thin cracks, the edges of which are covered by polymineralic encrustations. Samples collected 2–24 h after eruption contain nahcolite, trona, sylvite, and halite with accessory kalicinite and villiaumite. Atmospheric humidity results immediately (≥ 2 h after eruption) in alteration of black lavas that is marked by the appearance of white powdery thermonatrite with nahcolite on the lava surface. Subsequent reaction (weeks, months, years) of natrocarbonatite with meteoric water and the atmosphere results in the formation of pirssonite, gaylussite, shortite, trona, thermonatrite, nahcolite and calcite. Generally, the first important step is the formation of pirssonite and the end-members are calcite carbonate rocks or loose aggregates. Fumarolic activity is common for the active northern crater of the volcano. Reaction of hot (54–141 °C) fumarolic gases with natrocarbonatite leads to the formation of sulphur, gypsum, calcite, anhydrite, monohydrocalcite, barite and celestine. Changes in mineralogy of the natrocarbonatite lead to substantial chemical transformation. The most obvious chemical changes in this process are the loss of Na, K, Cl and S, combined with an increase in H₂O, Ca, Sr, Ba, F and Mn. The oxygen and carbon isotopic composition of altered natrocarbonatites shows a significant shift from the primary “Lengai Box” to high values of δ¹⁸O and δ¹³C. Calcite exhibits δ¹³C values between − 2‰ and − 4‰ PDB and δ¹⁸O values of + 23‰ to + 26‰ SMOW. The observed assemblages of secondary minerals formed by reaction with atmosphere and meteoric water, the changes in chemical composition of the natrocarbonatite and field observations suggest that alteration of natrocarbonatite is an open-system low-temperature process. It takes place at temperatures between 8 and 43 °C with the addition of H₂O to the system and the removal of Na, K, Cl and S from the carbonatites. Low-temperature thermodynamic models developed for alkali carbonate systems can be used for the interpretation of Oldoinyo Lengai subsolidus mineralization.     

Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.     

营口虎皮峪绿泥石化蚀变岩带及其铀矿化特征研究

绿泥石化蚀变岩带位于虎皮峪杂岩体北部。六块地－哈达岭一带，东西长８．２ｋｍ，产在辽河群里尔峪组磁铁矿浅粒岩段与电气石变粒岩段之间，由外向内可划分为４个蚀变亚带，其中绿泥石化、黄铁矿化亚带赋含铀矿。依据矿物蚀变关系、脉体切割关系，蚀变带内矿物生成顺序可划分３期６个阶段，铀矿化产于热液蚀变期。铀矿化受ＥＷ向绿泥石化蚀变岩带控制，与铀矿化有关的蚀变有绿泥石化、硅化、赤铁矿化，主要的合矿围岩有大理岩、蚀变浅粒岩。铀与铁、锰、钙、磷、铜、铅、镧、铈、钴呈正相关，而与造岩元素硅，铝，钾，钠呈负相关。铀矿物主要为沥青铀矿，形成于早元古代。揭露工作证明是一有远景的矿点。     

Mise au point d'un milieu de culture pour l'étude de l'altération de silicates en présence de Pseudomonas aeruginosa

The influence of microorganisms on mineral alteration is not easy to determine in environmental conditions, because of the difficulty to raise for comparison purposes an identical but abiotic system. Another problem in this context is the choice of reliable tracers to evaluate the alteration rate of materials during in vitro experiments. To face such difficulties, we elaborated a defined medium allowing both the growth of Pseudomonas aeruginosa and a precise measurement of the elements solubilized from the minerals. Thanks to this medium, we were able to quantitatively determine the amounts of major elements solubilized from the materials in the presence of bacterial growth, compared to a sterile system. Moreover, the analysis by ICP-MS of trace elements was possible after a chromatographic treatment, which selectively eliminated 99% of the sodium content of the medium. To cite this article: G. Aouad et al., C. R. Geoscience 337 (2005).     

姚家岭锌金多金属矿床围岩蚀变三维空间定量分析研究

姚家岭锌金多金属矿床是近年来在长江中下游成矿带铜陵矿集区新发现的大型多金属矿床。姚家岭锌金多金属矿床的成矿作用具有多阶段性的特点,矿床范围内围岩蚀变强烈,蚀变类型复杂多样。三维地质信息技术及三维空间分析方法为定量化分析围岩蚀变的空间分布以及与矿化之间的相关关系提供了有利工具。本文基于上述方法,有效地对姚家岭锌金多金属矿床的围岩蚀变的分带性及其与不同矿化之间的关联性行了定量分析。较之于传统研究方法,不仅能快速地对蚀变与矿化的分布特征进行分析,还能从定量的角度获取不同信息之间的规律性和相关性。本文采用的相关方法不但有助于更准确的判定蚀变分带及规律,还可为矿床的成矿模式及找矿模型的建立提供定量化的数据支持。     

Hydrothermal alteration processes in the giant Dahutang tungsten deposit,South China: Implications from litho-geochemistry and mass balance calculation

The giant Dahutang tungsten (W) deposit has a total reserve of more than 1.31 Mt WO₃. Veinlet-disseminated scheelite and vein type wolframite mineralization are developed in this deposit, which are related to Late Mesozoic biotite granite. Four major types of alterations, which include albitization, potassic-alteration, and greisenization, and overprinted silicification developed in contact zone. The mass balance calculate of the four alteration types were used to further understanding of the mineralization process. The fresh porphyritic biotite granite has high Nb, Ta, and W, but low Ca and Sr while the Jiuling granodiorite has high Ca and Sr, but low Nb, Ta, and W concentrations. The altered porphyritic biotite granite indicated that the Nb, Ta, and W were leached out from the fresh porphyritic biotite granite, especially by sodic alteration. The low Ca and Sr contents of the altered Neoproterozoic Jiuling granodiorite indicate that Ca and Sr had been leached out from the fresh granodiorite by the fluid from Mesozoic porphyritic biotite granites. The metal W of the Dahutang deposit was mainly derived from the fluid exsolution from the melt and alteration of W-bearing granites. This study of alteration presents a new hydrothermal circulation model to understand tungsten mineralization in the Dahutang deposit.