激光跟踪仪在核电站主管道安装中的应用

目前,核电站的主管道焊接越来越多的采用了自动焊技术,这有利于提高焊接质量效率,还可以压缩建设成本。然而,主管道自动焊对焊缝的限差较现有工艺要求更高,高精度的测量是实现主管道自动焊的必要条件之一。本文针对主管道自动焊管口组队高精度的技术要求,提出采用激光跟踪仪对主管道自动焊相关的设备进行更为精密的三维工业测量,通过理论技术评定测量精度,然后选择测量仪器和编制具体的测量方案,最终保证了主管道自动焊精确组对的实现。     

无人机航摄方案计算机辅助设计研究

随着科技发展,无人机航空摄影测量以其实时性高、机动灵活、数据获取精度高的优势逐渐成为现代测绘技术的重要手段,在测绘领域发挥着越来越重要的作用.然而,当前无人机航摄方案设计书的制定主要依赖人工,未通过系统设备进行辅助完成,需要耗费大量的精力,难以满足无人机航摄的具体工作要求.针对上述问题,提出了利用计算机辅助设计无人机航空摄影测量方案的技术方法,在无人机航飞之前根据航区设计及相关参数制定一份方案设计书,方便工作人员对无人机飞行作业的可行性及安全性进行理论验证,提升了航摄方案设计的自动化过程,提高了工作效率,同时为开展摄影测量工作提供技术和安全保障.      

南海神狐海域沉积物自生黄铁矿和石膏S同位素特征及对甲烷渗漏强度的示踪

The northern slope of the South China Sea is a gas-hydrate-bearing region related to a high deposition rate of organic-rich sediments co-occurring with intense methanogenesis in subseafloor environments.Anaerobic oxidation of methane(AOM) coupled with bacterial sulfate reduction results in the precipitation of solid phase minerals in seepage sediment,including pyrite and gypsum.Abundant aggregates of pyrites and gypsums are observed between the depth of 667 and 850 cm below the seafloor(cmbsf) in the entire core sediment of HS328 from the northern South China Sea.Most pyrites are tubes consisting of framboidal cores and outer crusts.Gypsum aggregates occur as rosettes and spheroids consisting of plates.Some of them grow over pyrite,indicating that gypsum precipitation postdates pyrite formation.The sulfur isotopic values(δ~(34) S) of pyrite vary greatly(from –46.6‰ to –12.3‰ V-CDT) and increase with depth.Thus,the pyrite in the shallow sediments resulted from organoclastic sulfate reduction(OSR) and is influenced by AOM with depth.The relative high abundance and δ~(34) S values of pyrite in sediments at depths from 580 to 810 cmbsf indicate that this interval is the location of a paleo-sulfate methane transition zone(SMTZ).The sulfur isotopic composition of gypsum(from–25‰ to –20.7‰) is much lower than that of the seawater sulfate,indicating the existence of a 34 S-depletion source of sulfur species that most likely are products of the oxidation of pyrites formed in OSR.Pyrite oxidation is controlled by ambient electron acceptors such as MnO_2,iron(Ⅲ) and oxygen driven by the SMTZ location shift to great depths.The δ~(34) S values of gypsum at greater depth are lower than those of the associated pyrite,revealing downward diffusion of 34 S-depleted sulfate from the mixture of oxidation of pyrite derived by OSR and the seawater sulfate.These sulfates also lead to an increase of calcium ions from the dissolution of calcium carbonate mineral,which will be favor to the formation of gypsum.Overall,the mineralogy and sulfur isotopic composition of the pyrite and gypsum suggest variable redox conditions caused by reduced seepage intensities,and the pyrite and gypsum can be a recorder of the intensity evolution of methane seepage.     

Smectite formation in metalliferous sediments near the East Pacific Rise at 13°N

A 43 cm long E271 sediment core collected near the East Pacific Rise(EPR) at 13°N were studied to investigate the origin of smectite for understanding better the geochemical behavior of hydrothermal material after deposition.E271 sediments are typical metalliferous sediments. After removal of organic matter, carbonate, biogenic opal,and Fe-Mn oxide by a series of chemical procedures, clay minerals(2 μm) were investigated by X-ray diffraction,chemical analysis and Si isotope analysis. Due to the influence of seafloor hydrothermal activity and close to continent, the sources of clay minerals are complex. Illite, chlorite and kaolinite are suggested to be transported from either North or Central America by rivers or winds, but smectite is authigenic. It is enriched in iron, and its contents are highest in clay minerals. Data show that smectite is most likely formed by the reaction of hydrothermal Fe-oxyhydroxide with silica and seawater in metalliferous sediments. The Si that participates in this reaction may be derived from siliceous microfossils(diatoms or radiolarians), hydrothermal fluids, or detrital mineral phases. And their δ30 Si values are higher than those of authigenic smectites, which implies that a Si isotope fractionation occurs during the formation because of the selective absorption of light Si isotopes onto Feoxyhydroxides. Sm/Fe mass ratios(a proxy for overall REE/Fe ratio) in E271 clay minerals are lower than those in metalliferous sediments, as well as distal hydrothermal plume particles and terrigenous clay minerals. This result suggests that some REE are lost during the smectite formation, perhaps because their large ionic radii of REE scavenged by Fe-oxyhydroxides preclude substitution in either tetrahedral or octahedral lattice sites of this mineral structure, which decreases the value of metalliferous sediments as a potential resource for REE.     

贵州夜郎湖表层水体地球化学昼夜变化及其影响因素

为探究岩溶水库水文地球化学行为过程,对贵州普定夜郎湖表层水体进行了为期3 d的高分辨率昼夜监测。结果表明：1）多变的天气和水文条件叠加导致水体离子指标昼夜变化不显著,规律性较差。而水温、DO、pH值、SpC、SIc、pCO₂等常规理化指标受水温变化和生物作用表现出明显的昼夜波动。2）利用亨利常数和主成分分析,得到温度变化、生物作用、人类活动、水库的蓄水与放水对夜郎湖水库水文地球化学特征变化的贡献率分别为21.66%、17.28%、14.08%和10.22%,说明作用于水库水文地球化学行为的因子具有多元性。3）δ ¹⁸O表现出与DO一致的波动趋势,即白天上升,晚上下降,反映在短时间尺度上,氢氧稳定同位素变化受控于生物过程（主要是呼吸作用过程）;而对比水库水体和大气降水的d-excess（d值）发现,水库水体的d值（8.21‰）显著偏低于当地大气降水的d值（9.64‰）,说明在长时间尺度上,主要受蒸发效应引起的不平衡分馏影响。     

黑河中游夏季昼夜水汽同位素特征及水汽来源分析

基于2012年6~8月的实测水汽同位素数据及相关气象数据，对黑河中游夏季昼夜的同位素基本特征、水汽来源方向及潜在蒸发源地进行了研究。结果表明：空气水汽线斜率白天大于夜晚和水汽过量氘值白天大于夜晚，综合说明白天局地蒸发较夜晚强烈；夏季受西风水汽影响显著。其中，6月主要受西风水汽和北冰洋水汽影响，7、8月主要受西风水汽和东南方向水汽影响，且8月受东南方向水汽影响最为明显；水汽运移路径上下垫面地形和气压带移动会影响水汽后向轨迹高度，西北方向上水汽输送通道较顺畅，风速较大，有利于水汽的输送；水汽蒸发源地主要集中在研究区周围及以东、以北部，其次是西北部。绿洲是主要的水汽蒸发源地，其次是城市和河流，白天较夜晚局地蒸发强烈且面积大。     

由地面重力数据确定扰动位径向二阶梯度

提出利用地面重力异常数据计算地面扰动位径向二阶梯度，将该梯度的积分表达式转换为卷形式的谱表达式，便于应用ＦＦＴ／ＦＨＴ技术进行快速计算。     

晶质铀矿自发裂变产生钌,银,碲的同位素探索

为了阐明对铀的自发裂变现象，采用热电离质谱测定法对几种类型晶质铀矿样品的Ｒｕ，ｔＥ和Ａｇ的同位素组成作了测定，由于自发裂变碎片有可能加入天然同位素中，在几个样品中的Ｒｕ，Ｔｅ清楚地显示出了＾９９Ｒｕ，＾１０１Ｒｕ，＾１０２Ｒｕ，＾１０４Ｒｕ，＾１２８Ｔｅ，＾１３０Ｔｅ同位素测量中得到裂变成因的Ａｇ，从Ｍｏｒｏｇｏｒｏ（坦桑尼亚）某晶质铀矿得到的Ｒｕ裂变模式表明，这种晶质铀矿可能已经处于中子诱发＾２