合并会计报表的电算编制方法探讨

利用用友软件对如何合并会计报表进行了初步研究，并以案例的形式阐明了采用用友软件实现合并会计报表的步骤，提出了合并会计报表的编制方法。     

基于Windows消息机制的人机交互的研究与应用

结合实例着重介绍了如何通过串行通讯利用Windows的消息机制来解决目前工业设备控制中人机交互的模拟问题,并对这两种技术进行了详细的论述.     

手掘式顶管在市政排水工程中的应用

从混凝土管材的选定、工作坑的设计及施工、顶管顶进中若干关键问题入手,介绍了手掘式顶管施工技术在成都市中心城水环境综合整治工程G标段管道排水工程中的应用。     

一种基于异步串行口的IBM-PC局部网

在综合的科学考察船上以异步通讯口实现的IBM-PC局部网具有较好的性能价格比。本文介绍了该网的联网环境、网络系统的组成及其拓扑结构、网络的服务功能以及网络软、硬件的安装和配置。     

2021年10月山西一次罕见持续性强降水过程物理机制分析

利用气象观测资料、NCEP/NCAR 1°×1°再分析资料以及GDAS资料,对2021年10月2-7日山西持续性强降水天气过程进行分析。结果表明：稳定的乌拉尔山低槽后部冷空气扩散,中纬度短波槽东移,与副热带高压外围西南暖湿气流持续交汇,同时高低空急流耦合形成强烈上升运动,低层切变线和地面辐合线稳定维持,及低层水汽不断输送并形成辐合,为持续性强降水的发生发展提供有利动力和水汽条件。此次强降水过程分为对流性降水和稳定性降水2个阶段,2阶段水汽输送通道的源地、路径、高度均有明显差异,但水汽输送贡献率均以对流层中低层山西南侧的水汽输送占主导地位。降水开始前,对流层中上层存在对称不稳定,大气可降水量明显跃增;对流性降水阶段,干空气不断入侵,对流不稳定快速建立与释放,对流层中低层水汽辐合区与强上升气流配合,导致山西出现强对流天气。地形的阻挡、抬升及地形收缩作用,对局地极端强降水具有增幅作用。     

四川省九龙县娃娃沟泥石流运动特征与堵河成灾机制分析

2006年7月16日娃娃沟流域暴发的大规模泥石流,给下游3个电站造成巨大经济损失,是大渡河流域一次典型的灾害性泥石流。分析得出,娃娃沟泥石流重度高、搬运能力强,泥石流固体物质砂、石混杂,粗大砾石含量高;暴发频率低、规模大,流速及峰值流量分别高达10．78m／s及798．5m^3／s;在汇口处,泥石流堆积物堵塞河道是引起下游电站受灾的重要原因,高重度、粗颗粒、大流量的组合是此次泥石流堵江的重要原因。堵河判别计算结果显示在发生百年一遇泥石流时,该断面均有发生堵河的可能。娃娃沟泥石流表明：①在大渡河支流的泥石流沟周边的中小电站极有可能在泥石流暴发时受到破坏。因此,电站建设过程中应加强对周边泥石流沟的防灾减灾工作;②虽然娃娃沟流域植被良好,但仍然发生了大规模泥石流。表明植被不能完全避免泥石流的发生,对于此类泥石流沟不能疏忽大意。     

土地更新调查成果与二次调查数据衔接问题的探讨

结合广西第二次土地调查工作实际,论述了在调查工作中对原土地更新调查成果的利用,对需补充、完善的调查内容逐一进行了分析和阐述,并对如何处理两次调查数据衔接中存在的问题提出了一些建议和看法。     

Integration of local–global upscaling and grid adaptivity for simulation of subsurface flow in heterogeneous formations

We propose a methodology, called multilevel local–global (MLLG) upscaling, for generating accurate upscaled models of permeabilities or transmissibilities for flow simulation on adapted grids in heterogeneous subsurface formations. The method generates an initial adapted grid based on the given fine-scale reservoir heterogeneity and potential flow paths. It then applies local–global (LG) upscaling for permeability or transmissibility [7], along with adaptivity, in an iterative manner. In each iteration of MLLG, the grid can be adapted where needed to reduce flow solver and upscaling errors. The adaptivity is controlled with a flow-based indicator. The iterative process is continued until consistency between the global solve on the adapted grid and the local solves is obtained. While each application of LG upscaling is also an iterative process, this inner iteration generally takes only one or two iterations to converge. Furthermore, the number of outer iterations is bounded above, and hence, the computational costs of this approach are low. We design a new flow-based weighting of transmissibility values in LG upscaling that significantly improves the accuracy of LG and MLLG over traditional local transmissibility calculations. For highly heterogeneous (e.g., channelized) systems, the integration of grid adaptivity and LG upscaling is shown to consistently provide more accurate coarse-scale models for global flow, relative to reference fine-scale results, than do existing upscaling techniques applied to uniform grids of similar densities. Another attractive property of the integration of upscaling and adaptivity is that process dependency is strongly reduced, that is, the approach computes accurate global flow results also for flows driven by boundary conditions different from the generic boundary conditions used to compute the upscaled parameters. The method is demonstrated on Cartesian cell-based anisotropic refinement (CCAR) grids, but it can be applied to other adaptation strategies for structured grids and extended to unstructured grids.     

Accurate local upscaling with variable compact multipoint transmissibility calculations

We propose a new single-phase local upscaling method that uses spatially varying multipoint transmissibility calculations. The method is demonstrated on two-dimensional Cartesian and adaptive Cartesian grids. For each cell face in the coarse upscaled grid, we create a local fine grid region surrounding the face on which we solve two generic local flow problems. The multipoint stencils used to calculate the fluxes across coarse grid cell faces involve the six neighboring pressure values. They are required to honor the two generic flow problems. The remaining degrees of freedom are used to maximize compactness and to ensure that the flux approximation is as close as possible to being two-point. The resulting multipoint flux approximations are spatially varying (a subset of the six neighbors is adaptively chosen) and reduce to two-point expressions in cases without full-tensor anisotropy. Numerical tests show that the method significantly improves upscaling accuracy as compared to commonly used local methods and also compares favorably with a local–global upscaling method.     

顶管施工中顶力与顶程关系及其影响因素分析

以上海某长距离急曲线顶管工程为例，通过现场实测4节管段顶进过程中的顶力，研究了顶力随顶程的变化规律，系统分析了顶进过程中顶力的主要影响因素，得到了一些有用的结论。