菲律宾海热含量分布及其变化的初步探讨

本文利用1986年及1987年秋季在菲律宾以东海域进行的CTD观测资料,分析了该海域上层海水热含量分布及变化,得出,热含量由南向北随纬度逐渐增大,这主要是北赤道流引起的等温线自南向北下倾造成的,另外也与南部和北部的冷涡和暖涡有关。本文认为,两年里热含量的差异可能与1986年生成的El Nin有关。另外,北太平洋赤道流体积输送量的变化与菲律宾海热含量的变化也有一定的联系。     

九州西侧海域129°E断面的流速和温盐结构特征

根据中、日合作黑潮调查研究期间（1987－1993年）在九州西侧海域获得的水文资料，计算了129°E断面的地转流速和流量。着重提出129°E断面北侧存在一支较稳定的西向流；分析这支西向流的去向，指出它是向对马暖流输送黑潮水的重要途径；给出了这支西向流及黑潮通过该断面的流速、流轴、流幅及流量的变化特征。     

无棱镜技术在电厂施工土方量测量中的应用

随着全站仪在测量中的广泛应用,测量的精度有了很大的提高.特别是无棱镜技术的发展,改变了以往的测量手段和方法,提高了工作的效率.土方量测量是施工过程中不可避免的,为此本文介绍无棱镜测量技术在洛河电厂施工过程中测量土方量的应用情况,通过对比实验,我们对无棱镜测量技术工作效率和成果精度以及适用条件进行分析.     

3D characterization of coarse aggregates

A new and accurate characterization method for dimensions, shape and roughness of aggregate particles has been developed. The method is based on the 3D-laser scanning technique and evaluation of coarse-grain aggregate-particle images. Parameters are obtained with either analytical Fourier analysis or geometrical analysis. The results from the two methods are compared with each other as well as with manual measurements. Although the Fourier-based analysis gives about 10% smaller size values, the comparison of the results shows, in general, a good agreement between the different techniques. This new method for analysis of coarse-grain aggregates gives reliable results for both the shape and topographical parameters of particles.     

2002年CT扫描和三维成像学术年会评述

由CT理论与应用研究编辑部和北京信息工程学院主办、有中国体视学学会多位理事和会员参加的“2002年CT扫描和三维成像研讨会（CT科技学术年会）”于2002年10月18－20日，在北京大学逸夫苑理科楼学术报告厅举行。中国体视学学会副理事长刘国权教授出席致辞，对于这次CT科技年会的召开表示祝贺，并介绍了2003年在美国圣迭戈和北京将要召开第11届国际体视学会大会的有关情况，希望有关专家准备论文出席，来自全国各地48位专家，教授出席了会议，本次会议涉及CT理论、计算方法和软件及硬件技术；医学CT扫描成像和疾病诊断；工业CT和三维成像：地球层析和工程CT。美国爱荷华大学王革教授，纽约罗彻斯特大学宁若拉教授专程到会，分别做了精彩的特邀主题报告：显微CT的锥束重建新方法和近年来在这方面的进展和展望”，“锥光束三维CT技术在美国的过去、现在和未来”“国内专家也报告了前沿研究的新成果，在会前，CT理论与应用研究编辑部，根据收到的论文和摘要汇编和印制了专集，在会议最后一天，召开了“CT理论与应用研究”期刊编委会，传达了中国科协对于办好科技期刊的新要求，会议开得很成功。     

Update and spatial extension of strategic forest inventories using time series remote sensing and modeling

Up-to-date forest inventory information relating the characteristics of managed and natural forests is fundamental to sustainable forest management and required to inform conservation of biodiversity and assess climate change impacts and mitigation opportunities. Strategic forest inventories are difficult to compile over large areas and are often quickly outdated or spatially incomplete as a function of their long production cycle. As a consequence, automated approaches supported by remotely sensed data are increasingly sought to provide exhaustive spatial coverage for a set of core attributes in a timely fashion. The objective of this study was to demonstrate the integration of current remotely-sensed data products and pre-existing jurisdictional inventory data to map four forest attributes of interest (stand age, dominant species, site index, and stem density) for a 55 Mha study region in British Columbia, Canada. First, via image segmentation, spectrally homogenous objects were derived from Landsat surface-reflectance pixel composites. Second, a suite of Landsat-based predictors (e.g., spectral indices, disturbance history, and forest structure) and ancillary variables (e.g., geographic, topographic, and climatic) were derived for these units and used to develop predictive models of target attributes. For the often difficult classification of dominant species, two modelling approaches were compared: (a) a global Random Forests model calibrated with training samples collected over the entire study area, and (b) an ensemble of local models, each calibrated with spatially constrained local samples. Accuracy assessment based upon independent validation samples revealed that the ensemble of local models was more accurate and efficient for species classification, achieving an overall accuracy of 72% for the species which dominate 80% of the forested areas in the province. Results indicated that site index had the highest agreement between predicted and reference (R² = 0.74, %RMSE = 23.1%), followed by stand age (R² = 0.62, %RMSE = 35.6%), and stem density (R² = 0.33, %RMSE = 65.2%). Inventory attributes mapped at the image-derived unit level captured much finer details than traditional polygon-based inventory, yet can be readily reassembled into these larger units for strategic forest planning purposes. Based upon this work, we conclude that in a multi-source forest monitoring program, spatially localized and detailed characterizations enabled by time series of Landsat observations in conjunction with ancillary data can be used to support strategic inventory activities over large areas.     

中朝边境天池破火山口湖底地形多波束测深探测

为调查天池破火山口湖的基本参数和湖底地形特征,研究破火山口的内部构造、破火山口的组合样式和垮塌堆积分布,本文采用多波束测深方法,对天池湖底地形进行了探测。探测结果显示:天池最大水深值为373.2m,天池水域边界实测周长为13.44km,天池湖水面面积9.4km~2,天池总蓄水量约为19.88×10~8m~3。天池周边分布4个温泉,温度为7~47℃。根据湖底地形推断,现今的天池破火山口形成于千年大喷发。其后,在天池西侧形成一个喷火口,东侧形成一个熔岩丘。天池湖底存在5个较大的破火山口内壁垮塌堆积区,但在湖底未见熔岩流。天池边缘出露的温泉点对应环状断裂,同时反映深部存在岩浆体。     

由井-含水层系统的水位动态反演含水层体应变

以孔隙弹性理论和水文地质学原理为基础,给出井水位波动与含水层介质体应变变化关系的数学表达式,结合固体潮理论分析了井—含水层系统水位潮汐波动对体应变固体潮的响应特征,用水位潮汐波来反演含水层体应变的变化,将反演结果与体应变实测资料得到的结果进行对比,发现二者有较好的一致性,说明用水位潮汐波来反演含水层体应变的方法是可行的,它为了解含水层的水文地质特性、体应变的变化及探索地震前兆提供了借鉴。     

Estimation of abl Parameters Using the Vertical Velocity Measurements of an Acoustic Sounder

The friction velocity, the surface heat flux and the height of the Atmospheric Boundary Layer (ABL) are important parameters. In this work, vertical velocity variance ( _w ² ) and wind velocity structure parameter (C _v ² ) profiles estimated by acoustic sounder measurements are used, along with similarity relations, to estimate these parameters in the unstable Atmospheric Boundary Layer and the friction velocity in the stable one. The data were collected by two acoustic sounders with different height range and resolution under various atmospheric conditions (stability) and at two experimental sites in different terrain. The C _v ² profiles are estimated using gate difference of the vertical velocity measurements and the assumption of local isotropy. The vertical velocity data are corrected for the significant effects of noisy measurements and sampling volume averaging on the _w ² and C _v ² estimations using original techniques that are presented in this work. The results of the similarity method using acoustic sounder data are compared against estimates of the corresponding atmospheric parameters obtained from direct measurements. The comparison confirms the ability of the method to provide reasonably accurate estimates of these parameters especially in the middle of the day.