重力斜导数方法在时间域中的理论模型与研究

Miller和Singh在1994年首次提出了斜导数(Tilt梯度)的定义,J.Derek Fairhead和Chris M.Green又于2004年在斜导数的基础上提出了Tilt梯度水平导数的概念。国内学者已对斜导数及斜导数水平导数展开研究,设定了多体模型、无限延伸倾斜脉模型、有限延伸倾斜台阶模型及埋深相同无限延伸垂直厚板及薄板模型,得出一些结论。针对一些地质体产状的判断,提出非绝对值斜导数水平导数的新概念,并应用于理论模型中验证,得出正确的结论。在上述理论模型基础上补充了断层模型和无限延伸倾斜台阶模型,应用非绝对值水平导数的理论解释地质体的产状,并对上述模型提出新的观点和看法。     

人造热带气旋垂直结构问题初探

在人造热带气旋中引入了倾斜垂直结构，并将其用于西折后9806号热带气旋登陆路径的数值模拟。结果表明：应用该方案所得到的模拟结果优于应用正压结构的人造热带气旋方案的模拟结果要准确。因此，此类热带气旋的预报中，其初始涡旋可采用倾斜垂直结构，从而提出改进热带气旋初始涡旋的一种新思路。若对其作进一步研究、推广，则具有广阔的业务应用前景。     

基于波动方程的广义屏叠前深度偏移

地震波传播算子的计算效率和精度是制约三维叠前深度偏移的关键因素. 广义屏传播算子(GSP, Generalized Screen Propagator)是一种在双域中实现的广角单程波传播算子. 这一方法略去了在非均匀体之间发生的交混回响,但它可以正确处理包括聚焦、衍射、折射和干涉在内的各种多次前向散射现象. 通过背景速度下的相移和扰动速度下的陡倾角校正,广义屏算子能够适应地层速度的强烈横向变化. 这种算子可以直接应用于炮集叠前偏移,通过将广义屏算子作用于双平方根方程,还可以获得一种高效率、高精度的炮检距域叠前深度偏移方法,用于二维共炮检距道集和三维共方位角道集的深度域成像. 本文首先简述了炮检距域广义屏传播算子的理论,进而讨论了共照射角成像(CAI, Common Angle Imaging)条件,由此给出各个不同照射角(炮检距射线参数)下的成像结果,进而得到共照射角像集. 由于照射角和炮检距的对应关系,共照射角像集又为偏移速度分析和AVO(振幅随炮检距变化)分析等提供了有力工具.     

山西临汾中心地震台地倾斜震前异常变化特征

从原始记录和分量图两方面对山西临汾中心地震台1991年以来的倾斜资料进行了分析，研究了临汾中心地震台地倾斜与省内及周边地区发生的中强地震的关系。结果表明，对1996年至2002年内发生的几次中强地震，临汾中心地震台地倾斜资料都有较好的异常反映。     

Weakness and mechanical anisotropy of phyllosilicate-rich cataclasites developed after mylonites of a low-angle normal fault (Simplon Line,Western Alps)

The Simplon Fault Zone is a late-collisional low-angle normal fault (LANF) of the Western Alps. The hanging wall shows evidence of brittle deformation only, while the footwall is characterized by a c. 1 km-thick shear zone (the Simplon Fault Zone), which continuously evolved, during exhumation and cooling, from amphibolite facies conditions to brittle-cataclastic deformations. Due to progressive localization of the active section of the shear zone, the thermal-rheological evolution of the footwall resulted in a layered structure, with higher temperature mylonites preserved at the periphery of the shear zone, and cataclasites occurring at the core (indicated as the Simplon Line). In order to investigate the weakness of the Simplon Line, we studied the evolution of brittle/cataclastic fault rocks, from nucleation to the most mature ones. Cataclasites are superposed on greenschist facies mylonites, and their nucleation can be studied at the periphery of the brittle fault zone. This is characterized by fractures, micro-faults and foliated ultracataclasite seams that develop along the mylonitic SCC′ fabric, exploiting the weak phases mainly represented by muscovite and chlorite. Approaching the fault core, both the thickness and frequency of cataclasite horizons increase, and, as their thickness increases, they become less and less foliated. The fault core itself is represented by a thicker non-foliated cataclasite horizon. No Andersonian faults or fractures can be found in the footwall damage zone and core zone, whilst they are present in the hanging wall and in the footwall further from the fault. Applying a stress model based on slip tendency, we have been able to calculate that the friction coefficient of the Simplon Line cataclasites was <0.25, hence this fault zone is absolutely weak. In contrast with other fault zones, the weakening effect of fluids was of secondary importance, since they accessed the fault zone only after an interconnected fracture network developed exploiting the cataclasite network.     

Long- and middle-term behaviour of the tilt and strain variations in the decade following the 1976 friuli earthquake in NE Italy

Tilt and strainmeter data collected in the Friuli seismic area between 1977 and 1985 have been analyzed to study the stress-strain field and/or the elastic parameter variations in the area after the strong 1976 seismic event.We concentrated on three different frequency bands, respectively linked with the tidal waves, the seasonal effect and the secular one. The results from the first two bands point at an increase of the local rigidity modulus.Relevant stresses induced by the seasonal groundwater level variations have been found, thus supporting the hypothesis that they can act as triggering effects. The secular trend reveals significant tectonic stress modifications. It appears that the post-seismic tectonic stresses faded during 1981–1983, and were followed by a new loading phase.On leave from the Institute of Geodesy and Geophysics of the Chinese Academy of Sciences. Ph. D. student at the Institute of Geodesy and Geophysics, Trieste University.     

Tilt corrections over complex terrain and their implication for CO<Subscript>2</Subscript> transport

Observational data from sonic anemometers are commonly rotated from sonic to streamline coordinates, a procedure that is called tilt correction. Tilt corrections are often used to post-process air velocity data collected from sonic anemometers to allow objective interpretation of air flow data relative to the Earth. Since streamline coordinates depend on dynamical characteristics of the flow, the tilt correction depends not only on temporal and spatial variations of the flow, but also on local circulations. We found that ensemble- averaged slope flows are approximately parallel to the terrain slope close to the ground within the canopy layer, but not above, due to the influence of the diurnal variation of local vertical circulations. As a result, the diurnal variation of the observed vertical velocity in streamline coordinates at 21.5 m above the ground over 11-m tall forest canopies can be opposite to that calculated from the continuity equation. To estimate CO₂ transport over sloping terrain, a workable reference coordinate system is needed such that multiple sonic anemometers have a common reference relative to the Earth. Streamline coordinate systems can be the choice of the common reference coordinate system only if flow, at least ensemble-averaged flow, is parallel to terrain slopes. The choice of the reference coordinate system and its implication in investigation of CO₂ transport are discussed. The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

基于CLG光学流和波场分解的逆时偏移角度道集提取方法研究

角度域共成像点道集是衔接叠前地震数据与储层特征的重要桥梁,对地震偏移成像与储层描述具有重要意义.与克希霍夫偏移和单向波动方程偏移相比,逆时偏移是复杂地区最精确的成像方法.高效稳健地生成逆时偏移角度道集目前仍然是一个挑战.本文主要讨论如何采用光学流方法高效、高质量地提取角度道集.在逆时偏移波场外推过程中,光学流方法可以估计波场传播方向.其中Lucas-Kanade(LK)和Horn-Schunck(HS)方法是光学流方法中两种典型的方法.LK光学流方法是一种局部方法,该方法依赖于局部点的梯度值,但是容易出现奇异现象,HS光学流方法属于全局方法,波场方向估计依赖于整个波场,易受噪声影响,对异常值比较敏感,导致整体波场方向计算精度不高.本文提出采用局部和整体结合(Combining Local and Global,CLG)的光学流方法估计波场传播方向.该方法可以有效地提高波场方向的精度,并且简单高效,便于并行处理.对比HS光学流方法,CLG光学流方法几乎不增加额外的计算量.另外,为了弱化光学流方法无法处理波前重叠问题,本文利用解析波场和方向滤波对波场进行方向分解,仅需波场的空间傅里叶变换即可实现任意波场方向分解,将分解后的波场分别估计波场反向,提取成像结果.进一步地,在估计反射张角和方位角时,本文提出有效的归一化方法和改进的最小二乘除法,提高角度估计的精度和稳定性.最后,理论和实际资料例证了本文提出方法的有效性.     

黔江台水管仪与垂直摆预报效能对比分析

水管仪与垂直摆均是通过观测地倾斜变化来捕捉地震前兆信息的定点形变仪器, 但因工作原理和观测频段不同, 其观测结果和异常形态具有一定差异性。 因此, 对两种仪器的不同异常形态进行预报效能评估具有重要意义。 利用异常自动化处理软件, 提取黔江台倾斜仪各测项趋势转折、 速率变化、 破年变和潮汐因子等常见异常, 并结合区域范围内的地震, 对不同异常进行R值评分, 评估不同测项的预报效能。 结果显示: 垂直摆NS分量预报效能最高, 其趋势转折异常和M2潮汐因子异常均具有较好的预报指示意义; 两套仪器的EW分量分别在破年变和速率变化预报效能较高; 而水管仪NS分量预报效能最差, 可能与该测项仪器故障频繁有关。 此外, 不同测项的异常对应的地震分布也具有一定的规律性。