Post-solidification cooling and the age of Io's lava flows

The modeling of thermal emission from active lava flows must account for the cooling of the lava after solidification. Models of lava cooling applied to data collected by the Galileo spacecraft have, until now, not taken this into consideration. This is a flaw as lava flows on Io are thought to be relatively thin with a range in thickness from ∼1 to 13 m. Once a flow is completely solidified (a rapid process on a geological time scale), the surface cools faster than the surface of a partially molten flow. Cooling via the base of the lava flow is also important and accelerates the solidification of the flow compared to the rate for the ‘semi-infinite’ approximation (which is only valid for very deep lava bodies). We introduce a new model which incorporates the solidification and basal cooling features. This model gives a superior reproduction of the cooling of the 1997 Pillan lava flows on Io observed by the Galileo spacecraft. We also use the new model to determine what observations are necessary to constrain lava emplacement style at Loki Patera. Flows exhibit different cooling profiles from that expected from a lava lake. We model cooling with a finite-element code and make quantitative predictions for the behavior of lava flows and other lava bodies that can be tested against observations both on Io and Earth. For example, a 10-m-thick ultramafic flow, like those emplaced at Pillan Patera in 1997, solidifies in ∼450 days (at which point the surface temperature has cooled to ∼280 K) and takes another 390 days to cool to 249 K. Observations over a sufficient period of time reveal divergent cooling trends for different lava bodies [examples: lava flows and lava lakes have different cooling trends after the flow has solidified (flows cool faster)]. Thin flows solidify and cool faster than flows of greater thickness. The model can therefore be used as a diagnostic tool for constraining possible emplacement mechanisms and compositions of bodies of lava in remote-sensing data.     

Occurrence and evolution of the Xiaotangshan hot spring in Beijing, China

Thermal groundwater occurs in bedrock aquifers consisting of the dolomite of the Wumishan Group of the Jixianin System and the Cambrian carbonate in the Xiaotangshan geothermal field near the northern margin of the North China Plain, China. The hot water in the geothermal field of basin-type discharges partly in the form of the Xiaotangshan hot spring under natural conditions. The hot water has TDS of less than 600 mg/L and is of Na·Ca-HCO₃ type. The geothermal water receives recharge from precipitation in the mountain area with elevation of about 500 m above sea level to the north of the spring. Thermal groundwater flows slowly south and southeast through a deep circulation with a residence time of 224 years estimated with the Ra–Rn method. The Xiaotangshan hot spring dried up in the middle of the 1980s owing to the increasing withdrawal of the hot water in the geothermal field in the past decades. The water level of the geothermal system still falls continually at an annual average rate of about 2 m, although water temperature changes very little, indicating that the recharge of such a geothermal system of basin-type is limited. Over-exploitation has a dramatic impact on the geothermal system, and reduction in exploitation and reinjection are required for the sustainable usage of the hot water.     

黑鲷和青石斑鱼对气泡幕反应的比较

在室内水池中观察了黑鲷（Ｓｐａｒｕｓｍａｃｒｏｃｅｐｈａｌｕｓ）和青石斑鱼（Ｅｐｉｎｅｐｈｅｌｕｓａｗｏａｒａ）对孔径０．５ｍｍ、孔距５．０ｃｍ，空气压力０．２５ｋｇ／ｃｍ２固定气泡幕的反应。结果表明，气泡幕对两种海水鱼都有显著的阻拦作用，平均阻拦率分别为黑鲷７５．１％、青石斑鱼８２．４％。分析显示，气泡幕对两种鱼的阻拦率间无显著差异。在本实验中，该两种鱼对气泡幕均无明显的适应现象     

地下水封石油洞库渗流场的数值分析

对研究区水文地质条件和地下水封石油洞库、水幕系统进行了概化,利用Visual MODFLOW软件,建立了某地下水封石油洞库无水幕和有水幕条件下的三维地下水数值模拟模型,模拟了地下水封石油洞库区的渗流场。利用所建模型预报了2种条件下涌入地下水封石油洞库的涌水量、区域地下水降落漏斗扩展情况及洞库上方地下水位变化情况等。由预测结果可知,2种条件下洞库涌水量均逐渐减小并趋于稳定,而有水幕条件下的地下漏斗扩展范围和速度均比无水幕条件小;在洞库开挖初期水幕作用较小,随时间延长作用愈加明显,因此水幕系统在保证地下水封石油洞库的储油安全和保护周围地下水资源方面都起到重要作用。     

近海海洋石油平台导管架喷涂金属层防腐

锌、铝及其合金涂层对钢铁的防护，不仅对阴极起保护作用(Gartland，1987)， 对涂层本身也具有良好的抗腐蚀性能。此外，涂层中金属微粒表面形成的致密氧化膜，也起到了防腐蚀的作用。在不同大气环境下，锌、铝有良好的耐蚀性，其腐蚀速率比钢铁要低得多(李言涛，1998)。采用热喷涂锌、铝及其合金涂层对钢铁构件和构筑物进行长效防护早在20世纪20年代就已开始应用，至今仍是普遍采用的防护措施，并在继续发展(李守本等，1989)。20年代初，法国首先用于海水闸门的防腐；40年代美国用于墨西哥湾的海上井架和海上输油管以及舰船的防腐；60年代英、法、德等国海军将这一技术扩大应用到舰船的上部结构和船壳。而金属热喷涂技术在海洋工程中使用非常有限，第一次使用热喷铝涂层防护近海平台的实例是Conoco公司在北海的Murchison结构上的锥形塔，并且已获得了4a良好的使用效能(Fisher et al.，1987；Shaw et al.，1985)。1984年6月，Hutton张力支柱平台(TLP)在北海下水(水深148 m)安装。系链、升降机和锥形塔均采用火焰热喷涂技术喷涂铝涂层进行防护(Tyson，1985)。1992年6月，Hotton平台使用8a后，对升降机绳索进行观察，在飞溅区没有发现腐蚀现象，也没有检测到褐色渗漏效应(Fisher et al.，1995)。     

东北大兴安岭多年冻土区工程地质特征及评价

土体在冻结状态具有极高的压缩模量, 具有弹性体的工程地质特征。但是在冻土地温升高过程中, 这种特征急剧衰减, 产生蠕变和流变, 建筑物地基强度降低, 导致建筑物基础破坏。同时土体在冻结过程中产生的冻胀作用也将导致建筑物基础的破坏。东北大兴安岭地区多年冻土为高纬度低海拔多年冻土, 其分布具有明显纬度地带性特点。本文在分析该区多年冻土分布特征及冻土工程地质特点的基础上, 对由于土体的冻胀和融沉导致的建筑物基础的危害进行分类研究, 针对性的提出了用热棒降低土体温度以保证多年冻土稳定及用排水的方法减少水对建筑物地基多年冻土影响的工程病害处理措施。     

Estimates of heat flow and heat production and a thermal model of the São Francisco craton

An updated analysis of geothermal data from the highland area of eastern Brazil has been carried out and the characteristics of regional variations in geothermal gradients and heat flow examined. The database employed includes results of geothermal measurements at 45 localities. The results indicate that the Salvador craton and the adjacent metamorphic fold belts northeastern parts of the study area are characterized by geothermal gradients in the range of 6–17°C/km. The estimated heat flow values fall in the range of 28–53 mW/m², with low values in the cratonic area relative to the fold belts. On the other hand, the São Francisco craton and the intracratonic São Francisco sedimentary basin in the southwestern parts are characterized by relatively higher gradient values, in the range of 14–42°C/km, with the corresponding heat flow values falling in the range of 36–89 mW/m². Maps of regional variations indicate that high heat flow anomaly in the São Francisco craton is limited to areas of sedimentary cover, to the west of the Espinhaço mountain belt. Crustal thermal models have been developed to examine the implications of the observed intracratonic variations in heat flow. The thermal models take into consideration variation of thermal conductivity with temperature as well as change of radiogenic heat generation with depth. Vertical distributions of seismic velocities were used in obtaining estimates of radiogenic heat production in crustal layers. Crustal temperatures are calculated based on a procedure that makes simultaneous use of the Kirchoff and Generalized Integral Transforms, providing thereby analytical solutions in 2D and 3D geometry. The results point to temperature variations of up to 300°C at the Moho depth, between the northern Salvador and southern São Francisco cratons. There are indications that differences in rheological properties, related to thermal field, are responsible for the contrasting styles of deformation patterns in the adjacent metamorphic fold belts.     

高原大地形及海洋热力强迫对东亚及北半球环流和气候变化影响的观测研究

本文总结了“青藏高原大地形及西太平洋暖池势力强迫对东亚及全球气候变化的影响”专题五年来的主要研究工作。其中包括青世故高原东部大气热源的时间演变特征,夏半年高原热源异常对我国降水和北半球环流的影响;西沙海温变化特征及其与我南方降水的关系,北太平洋海温主因子特征及其与华南前汛期降水的变化。     

板块绝对运动及地幔热对流

本文以板块绝对运动AM1-2模型为边界条件探讨了不同的瑞利数下地幔热对流模型.结果表明,瑞利数小于10000（529.41）时,地幔对流呈现以板块驱动图式,运动的极型场和环型场由板块运动激发,两种场占有差不多相同的功率.当瑞利数增加到接近或略超过最低临界值时（约1.5倍）,对流呈现出复杂状态:1.板块运动速率小于下伏地幔对流速率;2.区域性的双层对流环出现;3.对流谱成分发生变化;4.环型场仅在地幔很浅的区域中起作用,而在地幔深部对流图式中影响很小.     

Subsurface thermal and hydrothermal characterization based on geothermal resources map, drill hole thermal gradients, Curie point depths and hypocenter distribution — Examples of Tohoku district, Japan

Subsurface thermal structure in Tohoku district are characterized by existing data such as geothermal resources maps, drill hole thermal gradients, Curie point depths and hypocenters distribution maps. The collected data are registered in a database system, then, compared in plan view, cross-section and bird's-eye pictures. The comparison indicates that subsurface temperatures extrapolated from drill hole thermal gradients are generally concordant to the Curie point depth, assumed to be 650 °C. Tohoku district is generally divided into 5 type areas; fore arc lowland, fore arc mountain country, Quaternary volcanic terrain, back arc lowland and back arc mountain country. The surface thermal manifestations in Quaternary volcanic terrain are mainly controlled by the magma chambers as heat sources, while, surface thermal features such as hot springs in non-volcanic areas are controlled by degrees of heat flows, and hydrothermal flows in permeable Cenozoic formations and along permeable fault zones.