Extension spatiale de la salinisation des ressources en eau et modèle conceptuel des sources salées dans la plaine des Triffa (Maroc nord-oriental)

The succession of drought years and excessive abstraction in the plain of Triffa caused deterioration in water quality and endangers future exploitation of groundwater resources. A combination of geophysical surveys, including electrical resistivity and hydrochemical data has been used to identify the geographical extension of salinization and identify its origin. Electrical conductivity measurements are used to show the history of salinization in space and time. In this paper, a first conceptual model of the brackish springs has been established. To cite this article: M. Boughriba et al., C. R. Geoscience 338 (2006).     

Use of electrical resistivity methods for detecting subsurface fresh and saline water and delineating their interfacial configuration: a case study of the eastern Dead Sea coastal aquifers, Jordan

The alluvial aquifer is the primary source of groundwater along the eastern Dead Sea shoreline, Jordan. Over the last 20 years, salinity has risen in some existing wells and several new wells have encountered brackish water in areas thought to contain fresh water. A good linear correlation exists between the water resistivity and the chloride concentration of groundwater and shows that the salinity is the most important factor controlling resistivity. Two-dimensional electrical tomography (ET) integrated with geoelectrical soundings were employed to delineate different water-bearing formations and the configuration of the interface between them. The present hydrological system and the related brines and interfaces are controlled by the Dead Sea base level, presently at 410 m b.s.l. Resistivity measurements show a dominant trend of decreasing resistivity (thus increasing salinity) with depth and westward towards the Dead Sea. Accordingly, three zones with different resistivity values were detected, corresponding to three different water-bearing formations: (1) strata saturated with fresh to slightly brackish groundwater; (2) a transition zone of brine mixed with fresh to brackish groundwater; (3) a water-bearing formation containing Dead Sea brine. In addition, a low resistivity unit containing brine was detected above the 1955 Dead Sea base level, which was interpreted as having remained unflushed by infiltrating rain.     

3D behaviour of contamination in landfill sites using 2D resistivity/IP imaging: case studies in Portugal

Aiming at defining a valid spatial contamination model, resistivity and induced polarization (IP) measurements were used to investigate contamination plumes in the vicinity of two municipal landfills (Ovar and ílhavo). Previous geophysical surveys and underground water samples confirmed the contamination. However 2D resistivity/IP surveys enabled in obtaining a more accurate spatial model. The Ovar survey consisted of two profiles with nine Wenner soundings each; the ílhavo survey was carried out along two individual lines using a Wenner standard pseudo-section. In both situations, negative IP values were found associated with positive IP values, which can be explained mainly by 2D or 3D geometric effects caused by the presence of the conductive plumes. The data were modelled using a 2D inversion program (RES2DINV) and the resulting resistivity and chargeability distributions were displayed as pseudo-sections. The resistivity and chargeability pseudo-sections define the contamination plumes and the sedimentary structure. These case studies illustrate the advantages of 2D resistivity/IP surveys for the mapping of shape and dimension of contamination associated with landfills.     

电阻率图像中的地下水和断层

目的：将电阻率层析成像应用于探测潜伏断层的研究中，本文发现了断层和地下水的一些基本电阻率分布特征，这对于工程物探意义重大，一般情况下，断层两侧具有不同的电阻率特征，但是，根据电阻率层析图像中的电阻率分布，通常难以区分断层和地下水层，这是因为两者不仅都具有低电阻率值，而且还具有非常相似的电阻率异常特征。资料和方法：运用电阻率层析图像的数据，电阻率层析图像中的断层会呈现如下特征：1）由于孔隙度的加大和地下水的存在，使得断层表现出高角度的低阻线性结构。它们既可以出现在浅部盖层中，也可以存在于深部基岩中，特别是在深部区域，它们尤为明显；2）它们还呈现出高角度的线性梯度带，在该梯度带两边的电阻率结构出现整体性的差异，通常情况下，正断层的上盘表现出低阻或／和班驳状的高阻和低阻扰动区，而下盘则为完整的高阻区，这与逆冲断层正好相反；3）与断层有关的电阻率异常区常常具有良好的大尺度水平连续性，并且可以追瞎异常区附近的精细电性结构。而地下水的电阻率特征为：1）如果没有裂隙，地表水所引起的低阻区非常浅，即使存在丰富的水源以及高孔隙度的砾岩和中粗砂。一般情况下，其底端深度不超过强风化区；2）地下水的电阻率值非常低，特别在高矿化度的地区。地下水，包括岩溶水和砂岩水，的电阻率总显示出局部水平延伸或／和面团状特征；3）地下水层的深度朝某个固定方向逐渐增加，并且其电阻率图像会随季节而变；4）一般情况下，在水下渗的地区，会出现降水漏斗，其上部为高阻，而下部为低阻，从而便形成了“Y”或“V”字型的典型结构。结果：利用上述的基本特征一般可以区分断层和地下水。结论：仅依靠电阻率层析图像，可能极难准确地区分断层和裂隙水，这是因为裂隙水不但可能具有高角度的低阻线性结构，而且在一定尺度上具有很好的水平连续性，还有，由于电阻率层析成像较差的垂直分辨率，难以精确确定断层的上端点位置，所以结合其它的物探手段如钻探和浅层地震勘探是非常必要的。     

应县木塔地基工程地质勘测与分析

对山西应县木塔环境地质进行了研究,弄清了地层年代及存在的断层;通过样品分析、标准贯入及静探等方法试验、测试,得出了塔院区塔基土的工程物理性质和力学性质、承载力;用地学层析成像技术探测了木塔的基础结构及塔院地基的分层结构。     

高密度电阻率法二维成像方法及其应用

高密度电阻率法在工程勘察和环境监测中是一种很重要的勘探手段，高密度电阻率法二维成像理论与方法的研究在理论和实际应用上都有着很重要的意义。随着地球物理反演和成像技术研究的兴起和发展，层析成像技术在高密度电阻率法中的应用，提高了高密度电阻率法的勘探质量和精度。本文献电阻率法层析成像技术的前提条件及高密度电阻率法二维成像理论与方法进行了粗浅探讨，最后给出了一些应用实例。     

井间电阻率层析成象的某些进展

用有限元法作电阻率层析成象的核心问题是Ｊａｃｏｂｉ矩阵的求取和反演成象算法的研究。本文主要论述了这两方面的最新进展，即求取Ｊａｃｏｂｉ矩阵的格林函数法，用于反演成象计算的平滑度约束反演。文中通过理论模型的成象计算，比较了两种反演算法的成象效果。     

电法勘探的发展和展望

电法勘探在经历了近一个世纪的发展后，其方法理论、仪器设备、野外数据采集、处理和解释等方面都经历了一系列重大变化．本文以方法理论的进展为主线，回顾、展望了目前电法勘探中几个重要而令人关注的研究焦点．这些问题的研究进展将会对21世纪的电法勘探产生深远的影响．     

Detection and 2d modelling of cavities using pole–dipole array

The resistivity method is often used in cave prospecting. In this paper the pole–dipole array ability to detect cavities at different depths and with different water contents is investigated. The research was performed using analogical and numerical modelling. According to the results, empty caves at a depth less than four times its diameter can be easily detected. The ability of the pole–dipole array to detect water-filled caves reaches a minimum at filling percentages of 30–50%. Overburden effects research shows that low resistivity overburden reduces the resolution capability of the array. This study shows that equivalent results can be obtained by modelling the empty caves as infinite resistivity bodies or, alternatively, as very high resistivity ones. The analysis of field data acquired in the Maciço Calcário Estremenho (Portugal) shows the practical importance of the pole–dipole array in cavities prospecting.     

Towards more systematic perceptual model development: a case study using 3 Luxembourgish catchments

The synthesis of experimental understanding of catchment behaviour and its translation into qualitative perceptual models is an important objective of hydrological sciences. We explore this challenge by examining the cumulative understanding of the hydrology of three experimental catchments and how it evolves through the application of different investigation techniques. The case study considers the Huewelerbach, Weierbach and Wollefsbach headwater catchments of the Attert basin in Luxembourg. Subsurface investigations including bore holes and pits, analysis of soil samples and Electrical Resistivity Tomography measurements are presented and discussed. Streamflow and tracer data are used to gain further insights into the streamflow dynamics of the catchments, using end‐member mixing analysis and hydrograph separation based on dissolved silica and electrical conductivity. We show that the streamflow generating processes in all three catchments are controlled primarily by the subsolum and underlying bedrock. In the Huewelerbach, the permeable sandstone formation supports a stable groundwater component with little seasonality, which reaches the stream through a series of sources at the contact zone with the impermeable marls formation. In the Weierbach, the schist formation is relatively impermeable and supports a ‘fill and spill’‐type of flow mechanism; during wet conditions, it produces a delayed response dominated by pre‐event water. In the Wollefsbach, the impermeable marls formation is responsible for a saturation‐excess runoff generating process, producing a fast and highly seasonal response dominated by event water. The distinct streamflow generating processes of the three catchments are represented qualitatively using perceptual models. The perceptual models are in turn translated into quantitative conceptual models, which simulate the hydrological processes using networks of connected reservoirs and transfer functions. More generally, the paper illustrates the evolution of perceptual models based on experimental fieldwork data, the translation of perceptual models into conceptual models and the value of different types of data for processes understanding and model representation. Copyright © 2014 John Wiley & Sons, Ltd.