Microbially mediated carbonates in the Holocene deposits from Sarliève, a small ancient lake of the French Massif Central, testify to the evolution of a restricted environment

Both the mineralogy and facies of lacustrine bio‐induced carbonates are controlled largely by hydrological factors that are highly dependent upon climatic influence. As such they are useful tools in characterizing ancient lake environments. In this way, the study of the sedimentary record from the small ancient Sarliève Lake (Limagne, Massif Central, France) aims to reconstruct the hydrological evolution during the Holocene, using petrographical, mineralogical and geochemical analyses. The fine‐grained marls, mainly calcitic, display numerous layers rich in pristine Ca‐dolomite, with small amounts of aragonite, which are clearly autochthonous. As these minerals are rather unusual in the temperate climatic context of western Europe, the question arises about their forming conditions, and therefore that of the lacustrine environment. Ca‐dolomite prevails at the base of the sequence as a massive dolomicrite layer and, in the middle part, it builds up most of the numerous laminae closely associated with organic matter. Scanning electron microscope observations reveal the abundance of tiny crystals (tens to hundreds of nanometres) mainly organized as microspheres looking like cocci or bacilli. Such a facies is interpreted as resulting from the fossilization of benthic microbial communities by dolomite precipitation following organic matter consumption and extracellular polymeric substance degradation. These microbial dolomites were precipitated in a saline environment, as a consequence of excess evaporation from the system, as is also suggested by their positive ?¹⁸O values. The facies sequence expresses the following evolution: (i) saline pan, i.e. endorheic stage with a perennial lowstand in lake level (Boreal to early Atlantic periods); (ii) large fluctuations in lake level with sporadic freshening of the system (Atlantic); (iii) open lake stage (sub‐boreal); and (iv) anthropogenic drainage (sub‐Atlantic).     

Focal mechanism inversion in the Giudicarie–Lessini seismotectonic region (Southern Alps, Italy): Insights on tectonic stress and strain

A set of 41 focal mechanisms (1989–2006) from P-wave first polarities is computed from relocated seismic events in the Giudicarie–Lessini region (Southern Alps). Estimated hypocentral depths vary from 3.1 to 20.8 km, for duration magnitudes (M_D) in the range 2.7–5.1. Stress and strain inversions are performed for two seismotectonic zones, namely G (Giudicarie) and L (Lessini). This subdivision is supported by geological evidence, seismicity distribution, and focal mechanism types. The available number of data (16 in G, 22 in L) does not make possible any further subdivisions. Seismotectonic zones G and L are undergoing different kinematic regimes: thrust with strike-slip component in G, and strike-slip in L. Principal stress and strain axes in each sub-region show similar orientations. The direction of maximum horizontal compressive stress is roughly perpendicular to the thrust fronts along the Giudicarie Belt in zone G, and compatible with right-lateral strike-slip reactivation of the faults belonging to the Schio-Vicenza system in zone L. On the whole, kinematic regimes and horizontal stress orientations show a good fit with other stress data from focal mechanisms and breakouts and with geodetic strain rate axes.     

Morphological analysis of the drainage system in the Eastern Alps

We study the morphology of the major rivers draining the Eastern Alps to test whether the active tectonics of this part of the orogen is reflected in the shape of channel profiles of the river network. In our approach we compare channel profiles measured from digital elevation models with numerically modelled channel profiles using a stream power approach. It is shown that regions of high stream power coincide largely with regions of highest topography and largest uplift rates, while the forelands and the Pannonian Basin are characterised by a significantly lower stream power. From stream power modelling we conclude that there is young uplift at the very east of the Eastern Alps, in the Bohemian Massif and in the Pohorje Range. The impact of the Pleistocene glaciations is explored by comparing properties of rivers that drain in proximal and distal positions relative to the ice sheet during the last glacial maximum. Our analysis shows that most knick points, wind gaps and other non-equilibrium features of catchments covered by ice during the last glaciations (Salzach, Enns) can be correlated with glacial processes. In contrast the ice free catchments of the Mur and Drava are characterized by channels in morphological equilibrium at the first approximation and are showing only weak evidence of the strong tectonic activity within these catchments. Finally, the channel profiles of the Adige and the divide between the upper Rhine and Danube catchments differ significantly from the other catchments. We relate this to the fact that the Adige and the Rhine respond to different base levels from the remainder of the Eastern Alps: The Adige may preserve a record from the Messininan base level change and the Rhine is subject to the base level lowering in the Rhine Graben.     

Geomorphological hazards related to deep dissolution phenomena in the Western Italian Alps: Distribution, assessment and interaction with human activities

Deep dissolution affects great part of soluble rocks (e.g. gypsum and anhydrite) of the Western Italian Alps. The related superficial phenomena (sinkholes, gravity-induced processes and a local worsening of geomechanical rock properties) are not limited to typical karsts landscape and cause slope instability also affecting populated sites and infrastructures. The paper aims to describe general characteristic of dissolution phenomena, to interpret their conditioning factors and evolutionary stages and to assess possible hazards due to their superficial effects.The search for evidences of deep dissolution leads to the selection of representative sites in the central part of the Western Italian Alps (Piemonte and Valle d'Aosta Region). Detailed geological and geomorphological studies have been used to classify the selected sites by type, size and variable state of activity. Very different evolutionary stages of dissolution phenomena have been interpreted by comparison of case-studies: some are early “embryonic”; others are more evolved, up to typical sinkholes, or even remodelled by other phenomena. Some cases show an extreme complexity in the interactions between corrosion phenomena and other geomorphic processes: slope deformations, from one side, and karst, fluvial and glacial phenomena, to the other. A wide range of movement rates on slope instabilities induced by deep dissolution have been estimated by topographic and geomorphic data. Geochemical data on removed rocks by dissolution indicate 0.4 mm/year values for local subsidence. Historical and technical data indicate low frequency of major dissolution-induced collapses, but highlight widespread damages to tunnels, roads and buildings, especially along slopes.     

中太平洋海山群漂移史及其来源

中太平洋海山群的海山呈簇状排列且近EW向展布于太平洋海山密集区，其四周分布着一系列NW走向的线性列岛及规模巨大的水下海山链。它位于明显属于海山链构造的夏威夷群岛和马绍尔群岛之间，处于莱恩群岛的北西向延伸方向上，与热点作用的板内火山作用关系密切。结合前人对中太平洋海山群形成和漂移的认识，从板块运动和几何学角度出发，采用Backtracking和Hot-spotting海山追踪方法对该区海山进行了追踪，发现该区海山的热点源主要位于现今法属玻利尼西亚群岛区（法属玻利尼西亚热点群），这与前人从古地磁和钻探资料出发得到的结果相接近。研究表明，中太平洋海山群是多热点成因的板内火山作用和板块构造运动的共同产物，它在130～90Ma期间起源于法属玻利尼西亚热点群，曾随着太平洋板块发生过向南和向北的运动，既有水平方向的漂移又有垂直方向上的升降，在漂移和升降过程中还受到了当时大规模多期的热点活动和断裂活动的改造作用，经过一个漫长的过程后才到达今天的位置，最后形成了现今呈簇状分布的海山群。     

Channelized and hillslope sediment transport and the geomorphology of mountain belts

This paper uses the results of landscape evolution models and morphometric data from the Andes of northern Peru and the eastern Swiss Alps to illustrate how the ratio between sediment transport on hillslopes and in channels influences landscape and channel network morphologies and dynamics. The headwaters of fluvial- and debris-flow-dominated systems (channelized processes) are characterized by rough, high-relief, highly incised surfaces which contain a dense and hence a closely spaced channel network. Also, these systems tend to respond rapidly to modifications in external forcing (e.g., rock uplift and/or precipitation). This is the case because the high channel density results in a high bulk diffusivity. In contrast, headwaters where landsliding is an important sediment source are characterized by a low channel density and by rather straight and unstable channels. In addition, the topographies are generally smooth. The low channel density then results in a relatively low bulk diffusivity. As a consequence, response times are greater in headwaters of landslide-dominated systems than in highly dissected drainages. The Peruvian and Swiss case studies show how regional differences in climate and the litho-tectonic architecture potentially exert contrasting controls on the relative importance of channelized versus hillslope processes and thus on the overall geomorphometry. Specifically, the Peruvian example illustrates to what extent the storminess of climate has influenced production and transport of sediment on hillslopes and in channels, and how these differences are seen in the morphometry of the landscape. The Swiss example shows how the bedding orientation of the bedrock drives channelized and hillslope processes to contrasting extents, and how these differences are mirrored in the landscape. An erratum to this article can be found at     

Out-of-sequence thrusts and paleogeography of the Rhenodanubian Flysch Belt (Eastern Alps) revisited

The Oberstdorf nappe of the Western and the Laab nappe of the Eastern Rhenodanubian Flysch (ERF) were independently identified as out-of-sequence thrust units by facies studies (Mattern 1999) and zircon analyses (Trautwein et al. 2001a, b, c), respectively. A new look at both areas reveals mutual similarities and new evidence for the out-of-sequence concept. Paleocurrent and heavy mineral data make it possible to reconstruct the sediment influx directions. From the Barremian to the mid-Campanian, the western and eastern basin segments were fed with south-derived garnet and north-derived zircon/”ZTR” (i.e., zircon, tourmaline, and rutile). Because both out-of-sequence units are relatively rich in zircon/ZTR they must have occupied the northernmost basin position. In the Western Rhenodanubian Flysch segment, the Sigiswang nappe occupied the central and the Üntschen nappe the southernmost basin position. In the ERF segment the central basin is represented by the Greifenstein nappe and the southernmost basin by the Kahlenberg nappe. Both out-of-sequence units do not occur in the northernmost and tectonically lowest position in their respective nappe piles as they were thrust over the other nappes. The reconstructed basin positions of the thrust units are suggested by the observation of a gradient in heavy mineral content in the thrust units. This paleogeographic arrangement is least problematic and renders models with differently positioned thrust units, requiring debris-shedding intrabasinal ridges, as unnecessarily complicated. Instead, we suggest that gradual changes in heavy mineral composition existed in across-basin direction. Garnet may stem from the Central Gneiss Complex of the Tauern window and formerly exposed lateral equivalents, all representing the southern Mid-Penninic zone. We assign the Falknis/Tasna nappe and formerly exposed lateral equivalents to the northern Mid-Penninic zone which served as the zircon/ZTR source. Interpreting Ebbing’s (Ph.D. thesis, Freie Universität Berlin, pp 1-143, 2002; Fig. 6.10) density section, we suggest that Mid-Penninic crust exists beneath the Central Gneiss Complex. During the latest Cretaceous much garnet was also N-derived. This may reflect processes related to the consumption of the North Penninic basin.     

New age constraints on emplacement of the Cévenol granitoids, South French Massif Central

During the development of the Variscan orogeny, large amounts of granitic melt were produced, giving rise to the intrusion of granitoids at different structural levels. Despite numerous studies, ages available from previous work on the Cévennes granites remain largely imprecise. In order to better constrain the age and emplacement mode of these granites, we have combined U–Pb dating on monazites and zircons and ⁴⁰Ar/³⁹Ar dating on biotites with petrological observations, major element chemical analysis and SEM zircon imaging on five samples from the Aigoual–St Guiral–Liron and Mont Lozère granitic massifs. The results revealed that granitic intrusions and cooling in Southern Cévennes occurred in a short time span at ∼306 Ma after the main episode of regional metamorphism. Petrological and chemical data suggest that they result from a mixing between mantle-derived basic magmas (lamprophyres) and lower crust acid magmas. At a regional scale the production of these melts occurred at the end of crustal thickening induced by nappe stacking, at the same time as the late anatectic events recorded further north in the Velay dome and the granulite facies metamorphism recorded in metasedimentary granulite enclaves brought up by Tertiary volcanoes of the Velay area (Bournac).     

Quantitative basin characterisation to refine debris-flow triggering criteria and processes: an example from the Italian Western Alps

This paper investigates rapid channelized debris flow related to rainfalls in small alpine basins. Its goal is to evaluate and correlate different geological and technical aspects with predisposing and triggering factors that can control these phenomena. The study area is the upper part of the Susa Valley where 12 small basins were selected. For each of them, lithological, geomorphological, climatic and technical information were mapped and analysed. Debris-flow triggering conditions, flow and depositional processes were related to physical characteristics of the basin that can be easily measured and quantified. At least three different groups of basins were found: G1) basins with one event each 4–6 years, characterised by massive or blocky calcareous rocks, G2) basins with more than one event per year that show an abundance of layered or sheared fine-grained rocks and G3) basins with recurrence levels exceeding 10 years, activated only by heavy and prolonged rainfalls, marked by massive or blocky coarse-grained igneous rocks. Furthermore, important morphometric differences were found. These considerations are useful in terms of hazard zonation and risk mitigation.