一种从经纬度网格资料获得正方形网格资料的插值方案

本文提出了一种把经纬度网格点上的气象要素值转化到正方形网格点上的多项式插值方案。对插值方案作了稳定性讨论和定量及定性分析。结果表明,这种插值方案方便可行,而且有广泛适用性。     

拉格朗日插值法在渔业资源评估上的应用

应用拉格朗日插值法拟合鱼类体长与体重之间的函数关系 ,使用计算机VB语言进行编写程序 ,与常用的线性回归法、Ricker法进行比较 ,得出体长与体重的关系式为Pn(x) =∑nk=0yklk(x)=∑nk=0(∏nj=0j≠kx-xjxk-xj)yk 。     

Use of sinkhole and specific capacity distributions to assess vertical gradients in a karst aquifer

The carbonate-rock aquifer in the Great Valley, West Virginia, USA, was evaluated using a database of 687 sinkholes and 350 specific capacity tests to assess structural, lithologic, and topographic influences on the groundwater flow system. The enhanced permeability of the aquifer is characterized in part by the many sinkholes, springs, and solutionally enlarged fractures throughout the valley. Yet, vertical components of subsurface flow in this highly heterogeneous aquifer are currently not well understood. To address this problem, this study examines the apparent relation between geologic features of the aquifer and two spatial indices of enhanced permeability attributed to aquifer karstification: (1) the distribution of sinkholes and (2) the occurrence of wells with relatively high specific capacity. Statistical results indicate that sinkholes (funnel and collapse) occur primarily along cleavage and bedding planes parallel to subparallel to strike where lateral or downward vertical gradients are highest. Conversely, high specific capacity values are common along prominent joints perpendicular or oblique to strike. The similarity of the latter distribution to that of springs suggests these fractures are areas of upward-convergent flow. These differences between sinkhole and high specific capacity distributions suggest vertical flow components are primarily controlled by the orientation of geologic structure and associated subsurface fracturing.     

Variations in wave direction estimated using first and second order Fourier coefficients

In most design applications such as alignment of the berthing structure and breakwater alignment, it becomes necessary to determine the direction of design wave. There are two different approaches to determine wave direction. One involves the use of first order Fourier coefficients (mean wave direction) while the other uses second order Fourier coefficients (principal wave direction). Both the average wave direction over the entire frequency range (0.03–0.58 Hz) and the direction corresponding to the peak frequency are used in practice. In the present study, comparison is made on wave directions estimated based on first and second order Fourier coefficients using data collected at four locations in the west and east coasts of India. Study shows that at all locations, the mean and principal wave directions for frequencies ranging from 0.07 to 0.25 Hz (±0.5 times peak frequency) co-vary with a correlation coefficient of 0.99 but at lower and higher frequencies, difference between the parameters is large. Average difference between the mean wave direction at peak frequency and the average over the frequency related to spectral energy more than 20% of maximum value is less, around 13°. Study shows that average difference in the sea and swell directions is around 39°.     

笛卡儿坐标系的双多普勒天气雷达三维风场反演技术

文中研究了笛卡尔坐标系下双多普勒天气雷达三维风场反演技术 ,提出了包括雷达原始资料的预处理 ,空间插值以及可靠性检验的新方法 ,提高了反演结果的可信度和精确度。使用模拟的双多普勒雷达体扫资料进行了反演试验 ,结果表明 :本文的方法能够比较真实地反映风场的三维结构 ,可以用于真实风场的反演。     

用航空POLDER测量仪获取的方向性信息增强对北方森林冠层的识别(英文)

ＰＯＬＤＥＲ（地球反射极化和方向）仪器在ＢＯＲＥＡＳ实验中曾搭载ＮＡＳＡ的一架Ｃ１３０飞机飞行。在ＢＯＲＥＡＳ的南部地区，ＰＯＬＤＥＲ获取了各种实验场地上的ＢＲＤＦ测量值。森林覆盖地区的大的热点特征，以及十个地区上的镜面反射分量得到了描述。该文通过ＰＯＬＤＥＲ的测量数据，对向常规的光谱特征中加入通过遥感获得的方向性特征后，对各种森林覆盖的分类和区分能力的提高给出了定量化的解。当将方向信息加入常规光谱信息后，采用无监督分类时，类间耦合矩阵的各项显著减小（减小倍数为２－５倍）。这一事实证明了用遥感方向特征可以增强对ＢＯＲＥＡＬ森林覆盖的区分能力。     

Investigation of directional hydraulic fracturing based on true tri-axial experiment and finite element modeling

The initiation and propagation of directional hydraulic fracturing (DHF) was investigated based on true tri-axial experiment and finite element modeling. The influences of notch angle, notch length and injection rate on the DHF were investigated. The initiation and propagation of DHF was modeled by a 3D nonlinear finite element method. A comparison between experimental investigation and numerical modeling results indicates that there is a good correlation between unbalanced force (UF) and fracturing. UF can be used to predict the hydraulic fracture initiation and propagation.     

位场曲化平的插值-迭代法

将起伏曲面B上的位场向下延拓至曲面最低点的平面A的插值-迭代法步骤是：1）将曲面B上的场值放置在水平面A上具有相同水平坐标的点上，作为A上的初值；2）用若干水平面切割B，从A的初值，用快速傅里叶变换法(FFT)向上延拓出这些平面的场值，用插值的方法从这些平面的场值计算曲面B的场值；3）根据B上的实测值与计算值的差值，对A上的值进行加权改正；4）重复步骤2）和3），直到B上的差值小到可以忽略.这种插值-迭代法具有高的计算速度，比通常的FFT法延拓得更深，可以超过10倍点距.文中给出计算实例.     

一种插值相似方法作温度预测的应用研究

将插值方法运用到短期气象预测中，其基本原理是按照相似原理将产生相似结果来作预报。对云南昆明等四站温度进行了九年定性和定量预报检验，结果表明：这种方法具有良好的预报能力，可以作要素预报应用。