Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.     

The isotopic signature of monsoon conditions,cloud modes,and rainfall type

This work provides a comprehensive physically based framework for the interpretation of the north Australian rainfall stable isotope record (δ¹⁸O and δ²H). Until now, interpretations mainly relied on statistical relationships between rainfall amount and isotopic values on monthly timescales. Here, we use multiseason daily rainfall stable isotope and high resolution (10 min) ground‐based C‐band polarimetric radar data and show that the five weather types (monsoon regimes) that constitute the Australian wet season each have a characteristic isotope ratio. The data suggest that this is not only due to changes in regional rainfall amount during these regimes but, more importantly, is due to different rain and cloud types that are associated with the large scale circulation regimes. Negative (positive) isotope anomalies occurred when stratiform rainfall fractions were large (small) and the horizontal extent of raining areas were largest (smallest). Intense, yet isolated, convective conditions were associated with enriched isotope values whereas more depleted isotope values were observed when convection was widespread but less intense. This means that isotopic proxy records may record the frequency of which these typical wet season regimes occur. Positive anomalies in paleoclimatic records are most likely associated with periods where continental convection dominates and convection is sea‐breeze forced. Negative anomalies may be interpreted as periods when the monsoon trough is active, convection is of the oceanic type, less electric, and stratiform areas are wide spread. This connection between variability of rainfall isotope anomalies and the intrinsic properties of convection and its large‐scale environment has important implications for all fields of research that use rainfall stable isotopes.     

局部大地水准面精化系统软件的设计与实现

给出了局部大地水准面精化系统的总体结构以及各分系统的详细设计与实现方法,开发了旨在对相关重力测量数据实现自动化处理的局部大地水准面精化系统工具软件,并应用于某区域实际大地水准面的精确计算。实践证明,该系统能有效提高相关数据的处理效率,有助于局部大地水准面精化过程的规范化。     

On model predictions of the power spectral density of radial solar p modes

We investigate the frequency dependence of the power spectral density of low-degree solar p modes by comparing measurements with the results of a stochastic-excitation model. In the past it was common practice to use the total power in such investigations. Using the maximum of the power spectral density instead provides a direct comparison with the measured mode heights in the observed power spectrum. This method permits a more careful calibration of the adjustable parameters in the excitation model, a model which we present here, for the first time, in a format that precisely and unambiguously relates the amplitudes of the modes of oscillation to the Reynolds stress in the equilibrium model. We find that errors in the theory of the linear mode damping rates, particularly at low frequency, have a dramatic impact on the predictions of the mode heights in the spectral density, whereas parameter changes in the stochastic excitation model, within a plausible domain of parameter space, have a comparatively small effect.     

Spatially intermittent fields in photospheric magnetoconvection

Motivated by recent high-resolution observations of the solar surface, we investigate the problem of non-linear magnetoconvection in a three-dimensional compressible layer. We present results from a set of numerical simulations which model the situation in which there is a weak imposed magnetic field. This weak-field regime is characterized by vigorous granular convection and spatially intermittent magnetic field structures. When the imposed field is very weak, magnetic flux tends to accumulate at the edges of the convective cells, where it forms compact, almost 'point-like' structures which are reminiscent of those observed in the quiet Sun. If the imposed field is slightly stronger, there is a tendency for magnetic flux to become concentrated into 'ribbon-like' structures which are comparable to those observed in solar plages. The dependence of these simulations upon the strength of the imposed magnetic field is analysed in detail, and the concept of the fractal dimension is used to make a further, more quantitative comparison between these simulations and photospheric observations.     

CORROSION AND ADHERENCE AT SEA OIL-PLATFORM

Measurements of the adhesive corrosion and protective potentials of 3 Bohai Sea oilplatforms under different cathodic protection showed corrosion still occurred on these platforms undertheir designed protective potentials. Preliminary conclusions from indoor experiments on the relation betweenadhesive corrosion and cathodic protection showed adhering organisms caused the corrosion onthese platforms.     

区域GPS网实时计算可降水量的若干问题

目前地基GPS气象学测得的可降水量 (PWV )精度好于 2mm ,但在利用区域GPS网实时计算每个测站上空的PWV时 ,要涉及到很多常规GPS资料处理时所忽略的问题 ,如需考虑数据处理软件和计算方式的选择、站坐标的确定和约束、轨道的使用方法、网外辅助站最佳数量的确定、海潮对实时计算PWV的影响以及实时应用于气象服务时的端部效应等问题。利用上海GPS综合应用网获取的 2 0 0 2年 6、7月份长江三角洲地区入梅前后的数据 ,分析了利用区域性的GPS网实时计算高精度的PWV时要解决的各种问题 ,探讨了其数据处理方案     

Mass heterogeneities and convection in the earth's mantle inferred from gravity and core-mantle boundary irregularities

Mass heterogeneities in the earth's mantle are retrieved from the gravity data and the topography of the core-mantle boundary as well as the topography of the earth's surface. A mantle circulation induced by the heterogeneities is modelled by solving the Stokes problem for incompressible Newtonian fluid. The derived models of mantle motions correlate well with the plate tectonics and point at a close relation between the surface tectonic activity and the processes in the vicinity of the core-mantle boundary.     

Predicting ground-motion variations at the Turkey-flat test site,California

Results of a single group participating in an international experiment are analyzed. The experiment served to verify computational predictions of the ground-motion variations due to near-surface geological effects at a site established for that purpose by the California Department of Conservation. Based on an acceleration record at a rock location, and geotechnical model of medium, records at the other locations of a nearby sedimentary deposit were predicted. A 2-D finite-difference sensitivity analysis suggested that the lateral wave-propagation effects are negligibly small, and locally 1-D computations are sufficient for the present site. Those computations are compared with observations not available to the authors during the blind prediction. Peak accelerations, peak velocities and RMS accelerations were predicted with errors less than 159%, 114% and 62%, respectively. Maxima of the response spectra were fitted within a factor of 2. The predicted and observed Husid's plots (i.e., the normalized cumulative plots of the acceleration squared) have the correlation coefficients 0.98. The detected misfits do not show any simple relation to the instrument location, component, frequency, or time.     

Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.