Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.     

Spatial measurements of stream baseflow,a relevant method for aquifer characterization and permeability evaluation. Application to a hard‐rock aquifer,the Oman ophiolite

The structure, functioning and hydrodynamic properties of aquifers can be determined from an analysis of the spatial variability of baseflow in the streams with which they are associated. Such analyses are based on simple low‐cost measurements. Through interpreting the hydrological profiles (Q = f(A)) it is possible to locate the aquifer(s) linked to the stream network and to determine the type of interrelated flow, i.e. whether the stream drains or feeds the aquifer. Using an analytical solution developed for situations with a positive linear relationship, i.e. where the baseflow increases linearly with increasing catchment size, it is also possible to estimate the permeability of the aquifer(s) concerned at catchment scale. Applied to the hard‐rock aquifers of the Oman ophiolite, this method shows that the ‘gabbro’ aquifer is more permeable than the ‘peridotite’ aquifer. As a consequence the streams drain the peridotites and ‘leak’ into the gabbro. The hydrological profiles within the peridotite are linear and positive, and indicate homogeneity in the hydrodynamic properties of these formations at the kilometre scale. The permeability of the peridotite is estimated at 5 · 10^?7 to 5 · 10^?8 m/s. Copyright © 2004 John Wiley & Sons, Ltd.     

STUDY ON THE INTERACTION BETWEEN NDVI PROFILE AND THE GROWING STATUS OF CROPS

Daily and ten-day Normalized Difference Vegetation Index(NDVI) of crops were retrieved from meteorological statellite NOAA AVHRR images ,The temporal variations of the NDVI were analyzed during the whole growing season,and thus the principle of the interaction between NDIV profile and the growing status of crops was discussed,As a case in point,the relationship between integral NDVI and winter wheat yield of Henan Province in 1999 had been analyzed.By putting integral NDVI values of 60 sample counties into the winter wheat yield-integral NDVI coordination,scattering map was plotted. It demonstrated that integral NDVI had a close relation with winter wheat yield.These relation could be described with linear,cubic polynomial ,and exponential regression,and the cubic polynomial regression was the best way,In general ,NDVI reflects growing status of green vegetation ,so crop monitoring and crop yield estimation could be realized by using remote sensing technique on the basis of time serial NDVI data together with agriculture calendars.     

On salinity regimes and the vertical structure of residual flows in narrow tidal estuaries

An examination is made of the circulation in narrow estuaries subject to a predominant tidal forcing. Velocity structures are derived separately for residual flow components associated with (a) river flow, (b) wind stress, (c) a well-mixed longitudinal density gradient and (d) a fully stratified saline wedge. Dimensionless parameters are introduced to indicate the magnitude of each component and these parameters are evaluated for 9 major estuaries, thereby revealing their sensitivity to each component.For a channel of constant breadth and depth, formulae are deduced for the length of saline intrusion, L. Comparisons with observed data show that such formulae may be used with confidence to predict changes in L arising from variations in river flow, tidal range or channel depths.The level of stratification is shown to be related to a product of two parameters, one associated with velocity structure and a second involving the square of the ‘flow ratio’ $\text{u}\text{u}\text{?}$ (i.e. residual velocity/amplitude of the tidal velocity). This relationship provides a simple classification system for estuarine stratification which can be used to indicate the sensitivity of any particular estuary to changing conditions.     

VERTICAL PROFII,ES OF CHL-A AND PRIMARY PRODUCTIVITY IN THE MIDDLE CONTINENTAL SHELF AREA AND EDDY AREA OF THE EAST CHINA SEA

Vertical profiles of chl-a and primary productivity in the middle continental shelf area and eddy area of the East China Sea were studied using data from a cruise in the East China Sea in February to March, 1997 and a cruise in July, 1998. The results showed that chl-a vertical distribution closely related to in situ hydrological and nutrient conditions. Chla-a concentration ranged from 0.22 to 0.35 mg/m³ and 0.93–1.09 mg/m³ in the eddy area and in the middle continental shelf area, respectively. In both areas, chl-a concentrations in deep layers were slightly higher than those in shallow layers, but was of the same order of magnitude. In summer, when a thermocline existed in the water column, highest chl-a concentrations appeared at the base of the thermocline layers in both areas. In the eddy area, chl-a concentration maximized at 31.743 mg/m³, and averaged 1.143 mg/m³ below 30 m depth. In the middle continental shelf area, the highest chl-a concentration was 2.120 mg/m³, the average was 1.168 mg/m³. The primary productivity reached 1418.76 mgC/(m²·d) in summer and 1360.69 mgC/(m²·d) in winter. In the eddy area, the primary productivity was 787.50 mgC/(m²·d) in summer and 159.04 mgC/(m²·d) in winter. Vertical carbon sinking rate from the deep layer to the bottom in both areas is also discussed in this paper. Contribution NO. 4183 from the Institute of Oceanology, Chinese Academy of Sciences. Project No. 49636210 supported by NSFC.     

RETRACTION: Numerical simulation of a wind-sand flow under different conditions of atmospheric stability

A theoretical model for wind‐sand flow is developed by considering the coupling between wind flow and sand particle motion, the latter subject to the Magnus effect, under different atmospheric stability conditions. Using this model, the characteristics of the wind‐sand flow are discussed in detail. The results show that the atmospheric stability and the Magnus effect both have a strong influence on wind profiles and on the trajectories of sand particles. This approach produces results with characteristics that differ from those previously reported; the latter only applying to atmospheric conditions of neutral stability. The saltating sand reaches a greater height under non‐neutral stability than under neutral stability, while the maximum horizontal distance is greater under unstable conditions and is smaller under stable conditions than under conditions of neutral stability.     

Integrated approach for identification of potential groundwater zones in Seethanagaram Mandal of Vizianagaram District,Andhra Pradesh,India

Identifying a good site for groundwater exploration in hard rock terrain is a challenging task. In hard rocks, groundwater occurs in secondary porosity developed due to weathering, fracturing, faulting, etc., which is highly variable within short distance and contributing to near-surface inhomogeneity. In such situations topographic, hydrogeological and geomorphological features provide useful clues for the selection of suitable sites. Initially, based on satellite imagery, topographical, geomorphological and hydrogeological features, an area of about 149 km² was demarcated as a promising zone for groundwater exploration in the hard rock tract of Seethanagaram Mandal, Vizianagaram District, Andhra Pradesh, India. A total of 50 Vertical Electrical Soundings (VES) were carried out using Wenner electrode configuration. An interactive interpretation of the VES data sharpened the information inferred from geomorphological and hydrogeological reconnaissance. Ten sites were recommended for drilling. Drilling with Down-The-Hole Hammer (DTH) was carried out at the recommended sites down to 50 to 70 m depths. The interpreted VES results matched well with the drilled bore well lithologs. The yields of bore wells vary from 900 to 9000 liters per hour (lph).     

165°E赤道太平洋溶解氧垂直分布异常分析

根据1986—1990中美热带西太平洋海气相互作用8个航次合作综合调查资料，分析了1987年10月赤道中西太平洋165°E（10°N－6°S）次表层水形成溶解氧最大值的原因。1986－1987年E1Nino衰退时期，该海域赤道附近在E1Nino强盛时期下沉的次表层水开始回升，短时期内形成了类似于中、高纬度海域的理化环境，使浮游生物在混合层内聚集生长，最终导致溶解氧含量在次表层出现最大值和过饱和含量。     

Using the Mellor–Yamada mixing scheme in seasonally ice-covered seas—Corrigendum to: Parameterization of vertical mixing in the Weddell Sea [Ocean Modelling 6 (2004) 83–100]

A coding error in the s-Coordinate Primitive Equation Model (SPEM) has led to misleading statements about the behaviour of the Mellor–Yamada level 2 parameterization of vertical mixing. It has been claimed that the scheme removes static instability only very slowly and preserves statically unstable stratifications for an unrealistic long time. This note corrects this statement by demonstrating that the Mellor–Yamada mixing scheme, if implemented correctly, tends to overestimate rather than underestimate vertical mixing in seasonally ice-covered seas. Similar to other mixing schemes with the same behaviour, this leads to spurious open ocean deep convection, an unrealistic homogenization of the water column, and a significant reduction of sea ice volume.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.