乌鲁木齐大气混合层厚度和稳定度与大气污染的关系

利用乌鲁木齐市4座10层100 m梯度气象塔2013年6月~2014年4月气象观测资料和7个环境监测站[WTBX]AQI[WTBZ]资料，计算并分析了大气混合层厚度和稳定度特征，探讨了大气混合层厚度和稳定度与污染的关系。结果表明：乌鲁木齐市混合层厚度夏季郊区高、城区低，冬季从南郊—城区—北郊随地势降低依次降低；夏季和冬季分别在1 559～1 772 m和526～1 156 m之间。地面至2 km以上每500 m高度间隔统计混合层厚度，500～1 000 m出现频率最多；月变化为6～9月基本在500 m以上，且每个高度区间其概率均超过10%，10月～次年2月1 500 m以上区间概率明显减小；日变化为中午13:00～16:00达到最高值，下午和傍晚迅速下降。白天较大的感热输送提供充足的热力条件，这也体现出白天以不稳定层结为主，夜间则以稳定层结为主。大气稳定度分类结果，夏季郊区和城区不稳定（A～C类）所占比例差不多，冬季北郊稳定（E、F类）所占比较最大、城区最弱。[WTBX]AQI指数冬季最大，从南郊—城区—北郊依次增大，这与采暖期污染物多、南郊比北郊地势高有利于扩散输送有关。总体来看，乌鲁木齐大气混合层厚度空间分布与气象要素、大气稳定度、地形等密切相关，对AQI[WTBZ]指数分布有重要影响，这对近地层大气污染状况预报有着重要的指导意义。     

基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.     

沉积物中硬质粘土层的研究进展

大量的钻孔资料表明,平原地区及其海域沉积物中普遍有硬质粘土层的存在。硬质粘土层在工程地质、地理学研究等方面具有重要的价值,它不仅是高层建筑的持力层,而且是研究全球环境变化事件、古气候演变的良好载体。该文阐述了硬质粘土层的一般特征、成因以及在粒度、地球化学元素、年代学、沉积环境等方面的研究进展,并展望了硬质粘土层在年代、物质来源和沉积环境等方面的研究方向,认为黄河三角洲硬质粘土层研究较少,需要开展大范围的、系统深入的、多学科的宏观和微观综合分析,挖掘硬质粘土层蕴含的古环境意义和应用价值。     

Stokes漂流对全球海表面温度模拟的影响

Stokes漂流对海洋上混合层中的流场和温度场结构具有不可忽视的作用。本文基于WAVEWATCHⅢ海浪模式模拟的海浪要素计算得到Stokes漂流,将其引入SBPOM模式的动量方程中,从体积输运的角度研究Stokes漂流对全球海表面温度的影响。分析发现Stokes漂流与Stokes输运在全球呈现高纬度强于中低纬度的带状分布特征,且这种流动与输运对全球海表面温度具有降温作用,该降温作用的分布与全球Stokes输运强度相对应,高纬降温作用大于中低纬度,特别是南极绕极流海域平均降温明显大于其余海域,最大降温可达1.5℃,且全球月平均降温超过0.1℃。     

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.     

A MESO-β SCALE SIMULATION OF THE EFFECTS OF BOREAL FOREST ECOSYSTEM ON THE LOWER ATMOSPHERE

Based on the Intensive Field Campaign(IFC-1)data of Boreal Ecosystem-Atmosphere Study(BOREAS).a three-dimensional meso-β scale model is used to simulate the effect of boreal forests onthe lower atmosphere.A fine horizontal resolution of 2 km×2 km is used in order to distinguish thevegetative heterogeneity in the boreal region.A total of 20×25 grid points cover the entire sub-modeling area in BOREAS' South Study Area(SSA).The ecosystem types and their coverage ineach grid square are extracted from the North American Land Cover Characteristics Data Base(NALCCD)generated by the U.S.Geographical Survey(USGS)and the University of Nebraska-Lincoln(UNL).The topography of the study area is taken from the Digital Elevation Map(DEM)of USGS.The model outputs include the components of the energy balance budget within the canopyand at the ground.the turbulence parameters in the atmospheric boundary layer and the wind.temperature and humidity profiles extending up to a height of 1500 m.In addition to the fine timeand spatial step,the unique feature of the present model is the incorporation of both dynamic andbiological effects of the Boreal forest into the model parameterization scheme.The model resultscompare favorably with BOREAS' IFC-1 data in 1994 when the forest was in the luxuriant growingperiod.     

流褶层及韧变带研究

流褶层与韧变带是地壳拉伸变形，顺层固态流变作用下的产物。流褶层是以原始层理为变形面或再经递进变形的褶皱变形岩层或岩石共生组合层位。韧变带具明显的层控性，受岩石成分和应变程度控制，不同环境和不同成分岩石的韧变带具有相异的组合型式和变形机制，井具有一定的递变规律。流褶层和韧变带可分属不同层位，但流褶层可实现向韧变带的转化。     

石英砂扫描电镜在漓江“泥砾”成因中的应用

本文根据扫描电镜对从漓江河谷钻孔中的泥砾层取得的481粒石英砂表面形态特证研究结果:石英砂多数颗粒保持棱角状外形并遭受不同程度的磨蚀,具阶状贝壳断口,平直或弧形刮削面和多向擦痕,沿解理面破碎呈“V”字形沟和撞击碟形坑,以及微溶蚀孔、隙、蜂窝状溶孔群和SiO_2再沉积等表面形态结构特征。认为它是在第四纪古地理湿热气候条件下泥石流沉积的产物,物源可能来自境内或周边的泥盆系砂岩和境外的花岗岩。     

Deep Processes of Basin Evolution:A Case Study of the Southern Songliao Basin and Adjacent Area,NE China in Mesozoic-Cenozoic

1IntroductionOne of the key factors related to basin geody-namics is deep process controlling formation and evolution of sedimentary basin. Depth and tempera-ture of asthenosphere,existence of mantle plume,occurrence of mantle melting,and amounts of melts under depressurization during thinning of lithosphere are controlling factors influenced formation and characteristics of extensional basin directly (Li,1994). Rifting is probably governed by frictional forces exerted on the base of litho…     

An experimental study of the grain-scale processes of peridotite melting: implications for major and trace element distribution during equilibrium and disequilibrium melting

The grain-scale processes of peridotite melting were examined at 1,340°C and 1.5 GPa using reaction couples formed by juxtaposing pre-synthesized clinopyroxenite against pre-synthesized orthopyroxenite or harzburgite in graphite and platinum-lined molybdenum capsules. Reaction between the clinopyroxene and orthopyroxene-rich aggregates produces a melt-enriched, orthopyroxene-free, olivine + clinopyroxene reactive boundary layer. Major and trace element abundance in clinopyroxene vary systematically across the reactive boundary layer with compositional trends similar to the published clinopyroxene core-to-rim compositional variations in the bulk lherzolite partial melting studies conducted at similar P–T conditions. The growth of the reactive boundary layer takes place at the expense of the orthopyroxenite or harzburgite and is consistent with grain-scale processes that involve dissolution, precipitation, reprecipitation, and diffusive exchange between the interstitial melt and surrounding crystals. An important consequence of dissolution–reprecipitation during crystal-melt interaction is the dramatic decrease in diffusive reequilibration time between coexisting minerals and melt. This effect is especially important for high charged, slow diffusing cations during peridotite melting and melt-rock reaction. Apparent clinopyroxene-melt partition coefficients for REE, Sr, Y, Ti, and Zr, measured from reprecipitated clinopyroxene and coexisting melt in the reactive boundary layer, approach their equilibrium values reported in the literature. Disequilibrium melting models based on volume diffusion in solid limited mechanism are likely to significantly underestimate the rates at which major and trace elements in residual minerals reequilibrate with their surrounding melt. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.