Evaluation of a rule-based compositing technique for Landsat-5 TM and Landsat-7 ETM+ images

Image compositing is a multi-objective optimization process. Its goal is to produce a seamless cloud and artefact-free artificial image. This is achieved by aggregating image observations and by replacing poor and cloudy data with good observations from imagery acquired within the timeframe of interest. This compositing process aims to minimise the visual artefacts which could result from different radiometric properties, caused by atmospheric conditions, phenologic patterns and land cover changes. It has the following requirements: (1) image compositing must be cloud free, which requires the detection of clouds and shadows, and (2) the image composite must be seamless, minimizing artefacts and visible across inter image seams. This study proposes a new rule-based compositing technique (RBC) that combines the strengths of several existing methods. A quantitative and qualitative evaluation is made of the RBC technique by comparing it to the maximum NDVI (MaxNDVI), minimum red (MinRed) and maximum ratio (MaxRatio) compositing techniques. A total of 174 Landsat TM and ETM+ images, covering three study sites and three different timeframes for each site, are used in the evaluation. A new set of quantitative/qualitative evaluation techniques for compositing quality measurement was developed and showed that the RBC technique outperformed all other techniques, with MaxRatio, MaxNDVI, and MinRed techniques in order of performance from best to worst.     

Regional assessment of pan-Pacific urban environments over 25 years using annual gap free Landsat data

Urbanization and the associated change in land cover has been intensifying across the globe in recent decades. Regional studies on the rate and amount of urban expansion are critical for understanding how patterns of change differ within and among cities with varying structure and development characteristics. Yet spatially consistent and timely information on urban development is difficult to access particularly across international jurisdictions. Remote sensing based technologies offer a unique perspective on urban land cover with the data offering significant potential to urban studies due to its consistent and ubiquitous nature. In this research we applied a pixel-based image composite technique to generate annual gap-free surface reflectance Landsat composites from 1984 to 2012 for 25 urban environments across 12 countries in the Pacific Rim. Using time series composites, spectral indices were calculated and compared using a hexagonal grid ring model to assess changes in vegetative and urban patterns. Trajectories were then clustered to further investigate the spatio-temporal dynamics and relationships among the 25 cities. Performance of the clustering analyses varied depended on the temporal and spatial metrics however overall clustering results indicated relatively strong spatio-temporal similarities among a number of key cities. Three pairs of cities—Melbourne and Sydney; Tianjin and Manila; and Singapore City and Kuala Lumpur were found to be highly similar in their urban and vegetation dynamics temporally and spatially. In contrast Vancouver and Las Vegas had no similar analogous. This work demonstrates the value of utilising annual Landsat time series composites for assessing urban vegetation and urban dynamics at regional scales and potential use in sustainable urban planning, resources allocation, and policy making.     

Updating Landsat time series of surface-reflectance composites and forest change products with new observations

The use of time series satellite data allows for the temporally dense, systematic, transparent, and synoptic capture of land dynamics over time. Subsequent to the opening of the Landsat archive, several time series approaches for characterizing landscape change have been developed, often representing a particular analytical time window. The information richness and widespread utility of these time series data have created a need to maintain the currency of time series information via the addition of new data, as it becomes available. When an existing time series is temporally extended, it is critical that previously generated change information remains consistent, thereby not altering reported change statistics or science outcomes based on that change information. In this research, we investigate the impacts and implications of adding additional years to an existing 29-year annual Landsat time series for forest change. To do so, we undertook a spatially explicit comparison of the 29 overlapping years of a time series representing 1984–2012, with a time series representing 1984–2016. Surface reflectance values, and presence, year, and type of change were compared. We found that the addition of years to extend the time series had minimal effect on the annual surface reflectance composites, with slight band-specific differences (r ≥ 0.1) in the final years of the original time series being updated. The area of stand replacing disturbances and determination of change year are virtually unchanged for the overlapping period between the two time-series products. Over the overlapping temporal period (1984–2012), the total area of change differs by 0.53%, equating to an annual difference in change area of 0.019%. Overall, the spatial and temporal agreement of the changes detected by both time series was 96%. Further, our findings suggest that the entire pre-existing historic time series does not need to be re-processed during the update process. Critically, given the time series change detection and update approach followed here, science outcomes or reports representing one temporal epoch can be considered stable and will not be altered when a time series is updated with newly available data.     

试论遥感地质找矿的进展

随着遥感应用的进步,遥感在地质找矿中应用越来越深入,遥感的地质分析能力也不断提高。同时,地理信息系统在遥感信息集成分析、圈定成矿靶区及远景区的应用研究中,成为空间多源信息综合自理伯有力工具,在遥地质找矿中起着巨大的作用。遥感地质找矿的关键是遥感含矿信息提取技术。文章以遥感地质信息获取,含矿多源信息提取与分析,以及地理信息系统在地质找矿中的应用为主要内容,对遥感地质找矿的进展作了简要的阐述。     

Change detection from remotely sensed images: From pixel-based to object-based approaches

The appetite for up-to-date information about earth’s surface is ever increasing, as such information provides a base for a large number of applications, including local, regional and global resources monitoring, land-cover and land-use change monitoring, and environmental studies. The data from remote sensing satellites provide opportunities to acquire information about land at varying resolutions and has been widely used for change detection studies. A large number of change detection methodologies and techniques, utilizing remotely sensed data, have been developed, and newer techniques are still emerging. This paper begins with a discussion of the traditionally pixel-based and (mostly) statistics-oriented change detection techniques which focus mainly on the spectral values and mostly ignore the spatial context. This is succeeded by a review of object-based change detection techniques. Finally there is a brief discussion of spatial data mining techniques in image processing and change detection from remote sensing data. The merits and issues of different techniques are compared. The importance of the exponential increase in the image data volume and multiple sensors and associated challenges on the development of change detection techniques are highlighted. With the wide use of very-high-resolution (VHR) remotely sensed images, object-based methods and data mining techniques may have more potential in change detection.     

Estimating tree canopy cover using harmonic regression coefficients derived from multitemporal Landsat data

The goal of this study was to evaluate whether harmonic regression coefficients derived using all available cloud-free observations in a given Landsat pixel for a three-year period can be used to estimate tree canopy cover (TCC), and whether models developed using harmonic regression coefficients as predictor variables are better than models developed using median composite predictor variables, the previous operational standard for the National Land Cover Database (NLCD). The two study areas in the conterminous USA were as follows: West (Oregon), bounded by Landsat Worldwide Reference System 2 (WRS-2) paths/rows 43/30, 44/30, and 45/30; and South (Georgia/South Carolina), bounded by WRS-2 paths/rows 16/37, 17/37, and 18/37. Plot-specific tree canopy cover (the response variable) was collected by experienced interpreters using a dot grid overlaid on 1 m spatial resolution National Agricultural Imagery Program (NAIP) images at two different times per region, circa 2010 and circa 2014. Random forest model comparisons (using 500 independent model runs for each comparison) revealed the following (1) harmonic regression coefficients (one harmonic) are better predictors for every time/region of TCC than median composite focal means and standard deviations (across times/regions, mean increase in pseudo R² of 6.7% and mean decrease in RMSE of 1.7% TCC) and (2) harmonic regression coefficients (one harmonic, from NDVI, SWIR1, and SWIR2), when added to the full suite of median composite and terrain variables used for the NLCD 2011 product, improve the quality of TCC models for every time/region (mean increase in pseudo R² of 3.6% and mean decrease in RMSE of 1.0% TCC). The harmonic regression NDVI constant was always one of the top four most important predictors across times/regions, and is more correlated with TCC than the NDVI median composite focal mean. Eigen analysis revealed that there is little to no additional information in the full suite of predictor variables (47 bands) when compared to the harmonic regression coefficients alone (using NDVI, SWIR1, and SWIR2; 9 bands), a finding echoed by both model fit statistics and the resulting maps. We conclude that harmonic regression coefficients derived from Landsat (or, by extension, other comparable earth resource satellite data) can be used to map TCC, either alone or in combination with other TCC-related variables.     

Assessment of the image misregistration effects on object-based change detection

High-spatial resolution remote sensing imagery provides unique opportunities for detailed characterization and monitoring of landscape dynamics. To better handle such data sets, change detection using the object-based paradigm, i.e., object-based change detection (OBCD), have demonstrated improved performances over the classic pixel-based paradigm. However, image registration remains a critical pre-process, with new challenges arising, because objects in OBCD are of various sizes and shapes. In this study, we quantified the effects of misregistration on OBCD using high-spatial resolution SPOT 5 imagery (5 m) for three types of landscapes dominated by urban, suburban and rural features, representing diverse geographic objects. The experiments were conducted in four steps: (i) Images were purposely shifted to simulate the misregistration effect. (ii) Image differencing change detection was employed to generate difference images with all the image-objects projected to a feature space consisting of both spectral and texture variables. (iii) The changes were extracted using the Mahalanobis distance and a change ratio. (iv) The results were compared to the ‘real’ changes from the image pairs that contained no purposely introduced registration error. A pixel-based change detection method using similar steps was also developed for comparisons. Results indicate that misregistration had a relatively low impact on object size and shape for most areas. When the landscape is comprised of small mean object sizes (e.g., in urban and suburban areas), the mean size of ‘change’ objects was smaller than the mean of all objects and their size discrepancy became larger with the decrease in object size. Compared to the results using the pixel-based paradigm, OBCD was less sensitive to the misregistration effect, and the sensitivity further decreased with an increase in local mean object size. However, high-spatial resolution images typically have higher spectral variability within neighboring pixels than the relatively low resolution datasets. As a result, accurate image registration remains crucial to change detection even if an object-based approach is used.     

Mapping and characterizing the vegetation types of the Democratic Republic of Congo using SPOT VEGETATION time series

The need for quantitative and accurate information to characterize the state and evolution of vegetation types at a national scale is widely recognized. This type of information is crucial for the Democratic Republic of Congo, which contains the majority of the tropical forest cover of Central Africa and a large diversity of habitats. In spite of recent progress in earth observation capabilities, vegetation mapping and seasonality analysis in equatorial areas still represent an outstanding challenge owing to high cloud coverage and the extent and limited accessibility of the territory. On one hand, the use of coarse-resolution optical data is constrained by performance in the presence of cloud screening and by noise arising from the compositing process, which limits the spatial consistency of the composite and the temporal resolution. On the other hand, the use of high-resolution data suffers from heterogeneity of acquisition dates, images and interpretation from one scene to another. The objective of the present study was to propose and demonstrate a semi-automatic processing method for vegetation mapping and seasonality characterization based on temporal and spectral information from SPOT VEGETATION time series. A land cover map with 18 vegetation classes was produced using the proposed method that was fed by ecological knowledge gathered from botanists and reference documents. The floristic composition and physiognomy of each vegetation type are described using the Land Cover Classification System developed by the FAO. Moreover, the seasonality of each class is characterized on a monthly basis and the variation in different vegetation indicators is discussed from a phenological point of view. This mapping exercise delivers the first area estimates of seven different forest types, five different savannas characterized by specific seasonality behavior and two aquatic vegetation types. Finally, the result is compared to two recent land cover maps derived from coarse-resolution (GLC2000) and high-resolution imagery (Africover).     

环境场对近海热带气旋突然增强与突然减弱影响的对比分析

采用动态合成分析法对近海突然加强(RITC)和突然减弱(RWTC)两类热带气旋(TC)的环境场进行对比分析。研究表明:(1)两类TC形势场差异较明显,且影响RITC的南亚高压比影响RWTC的南亚高压强。(2)突变前后RITC有充足水汽供应配合较强辐合及上升运动,TC不断获得水汽凝结释放的潜热,使得损耗的能量得到补充和加强,高层辐散突变后减弱,使得TC能量得以保存和聚集,暖心结构被不断增加的潜热能所加强,有利于TC强度的爆发。(3)RWTC突变前后中低层上升运动减弱,中低层辐合变化不大,且由于水汽供应不足,TC获得的凝结潜热不足以补充TC自身的能量损耗,并且高层的上升运动及辐散突变后均加强,这些均有利于TC中心高层暖心热量不断减少,从而促使TC强度快速减弱。     

The effect of atmospheric and topographic correction on pixel-based image composites: Improved forest cover detection in mountain environments

Quantification of forest cover is essential as a tool to stimulate forest management and conservation. Image compositing techniques that sample the most suited pixel from multi-temporal image acquisitions, provide an important tool for forest cover detection as they provide alternatives for missing data due to cloud cover and data discontinuities. At present, however, it is not clear to which extent forest cover detection based on compositing can be improved if the source imagery is firstly corrected for topographic distortions on a pixel-basis. In this study, the results of a pixel compositing algorithm with and without preprocessing topographic correction are compared for a study area covering 9 Landsat footprints in the Romanian Carpathians based on two different classifiers: Maximum Likelihood (ML) and Support Vector Machine (SVM). Results show that classifier selection has a stronger impact on the classification accuracy than topographic correction. Finally, application of the optimal method (SVM classifier with topographic correction) on the Romanian Carpathian Ecoregion between 1985, 1995 and 2010 shows a steady greening due to more afforestation than deforestation.