Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.     

Determination of subcatchment and watershed boundaries in a complex and highly urbanized landscape

Urban development significantly alters the landscape by introducing widespread impervious surfaces, which quickly convey surface run‐off to streams via stormwater sewer networks, resulting in “flashy” hydrological responses. Here, we present the inadequacies of using raster‐based digital elevation models and flow‐direction algorithms to delineate large and highly urbanized watersheds and propose an alternative approach that accounts for the influence of anthropogenically modified land cover. We use a semi‐automated approach that incorporates conventional drainage networks into overland flow paths and define the maximal run‐off contributing area. In this approach, stormwater pipes are clustered according to their slope attributes, which define flow direction. Land areas drained by each cluster and contributing (or exporting) flow to a topographically delineated catchment were determined. These land masses were subsequently added or removed from the catchment, modifying both the shape and the size. Our results in a highly urbanized Toronto, Canada, area watershed indicate a moderate net increase in the directly connected watershed area by 3% relative to a topographically forced method; however, differences across three smaller scale subcatchments are greater. Compared to topographic delineation, the directly connected watershed areas of both the upper and middle subcatchments decrease by 5% and 8%, respectively, whereas the lower subcatchment area increases by 15%. This is directly related to subsurface storm sewer pipes that cross topographic boundaries. When directly connected subcatchment area is plotted against total streamflow and flashiness indices using this method, the coefficients of variation are greater (0.93 to 0.97) compared to the use of digital elevation model‐derived subcatchment areas (0.78 to 0.85). The accurate identification of watershed and subcatchment boundaries should incorporate ancillary data such as stormwater sewer networks and retention basin drainage areas to reduce water budget errors in urban systems.     

基于高斯两步移动搜寻法的村镇避难场所可达性研究

避难场所可达性是指避难场所与受灾居民之间的通达性,即灾害发生时,避难人员通过避难疏散通道到达避难场所的难易程度,是评价避难场所布局合理性的重要指标。本研究结合高斯两步移动搜寻法和网络分析法,从供需双向出发对村镇地区避难场所进行可达性分析。2种方法的结合,既充分考虑了需求点与设施点的相互作用,又充分考虑了设施点的吸引力随距离的衰减关系,并基于实际道路,以步行疏散时间作为搜索半径,降低了传统研究中因忽略供需间相互作用及实际距离而引起的可达性结果的误差。最后,以神农架松柏镇区为例,验证该方法的实际应用价值。结果表明,该方法能够有效测定村镇地区避难场所的空间可达性,同时,基于GIS软件可以直观地揭示研究区域内避难场所可达性空间分布差异。该方法可为制定科学的村镇防灾减灾规划提供方法支持。     

基于GIS的石家庄市雾霾分析

为了得出雾霾气象成因机制、影响因素和时空分布特征,以石家庄市区与郊县为研究区域,将2013年9月至2016年12月石家庄市各市区、郊县的PM2.5历史监测数据中的有效数据进行了数据分析处理得到雾霾浓度数据,还有温度、降水、风速、地形和人口密度等数据,运用GIS分析的方法,模拟绘制石家庄雾霾的时空分布图、雾霾与各影响因子的专题对比图,得到雾霾形成机制的因子、雾霾的时空分布规律、雾霾季节变化特征、雾霾与地形间的关系等;运用数据分析软件OriginPro8.SR3分析雾霾浓度与风速数据、降雨数据、温度数据间的相关性。     

“地理素养与测绘技能”双驱动的GIS专业大学生创新能力培养模式的探索

在信息技术快速发展和万众创新、大众创业的时代背景下，创新与创新人才已成为国家发展的重要推动力，创新教育和创新人才培养成为高校的重要任务。本文以武汉大学地理信息科学（GIS）专业为例，结合专业特点和优势，探索了"地理素养、测绘技能"驱动下的GIS专业大学生创新能力的培养模式和"厚基础、重知识、强技能"的贯通式培养途径。围绕创新人才培养和成长的内在因素和外部条件，从人才培养方案与课程体系、创新型教师团队与新型教学方法、教学科研创新平台与创新条件、创新人才发展评价与激励机制等4个方面开展了创新型发展探索。结合实践表明，本模式取得了显著的创新成果，产生了良好的示范辐射作用。     

A machine learning approach for predicting computational intensity and domain decomposition in parallel geoprocessing

ABSTRACT

High performance computing is required for fast geoprocessing of geospatial big data. Using spatial domains to represent computational intensity (CIT) and domain decomposition for parallelism are prominent strategies when designing parallel geoprocessing applications. Traditional domain decomposition is limited in evaluating the computational intensity, which often results in load imbalance and poor parallel performance. From the data science perspective, machine learning from Artificial Intelligence (AI) shows promise for better CIT evaluation. This paper proposes a machine learning approach for predicting computational intensity, followed by an optimized domain decomposition, which divides the spatial domain into balanced subdivisions based on the predicted CIT to achieve better parallel performance. The approach provides a reference framework on how various machine learning methods including feature selection and model training can be used in predicting computational intensity and optimizing parallel geoprocessing against different cases. Some comparative experiments between the approach and traditional methods were performed using the two cases, DEM generation from point clouds and spatial intersection on vector data. The results not only demonstrate the advantage of the approach, but also provide hints on how traditional GIS computation can be improved by the AI machine learning.     

气候变化下基于物种与植物耦联机制的小白额雁(Anser erythropus)潜在生境及适宜性研究--以长江流域中下游为例

气候变化和人类活动通过改变物种生境而影响物种多样性。小白额雁是长江流域中下游的一种具有较高生态价值的食草型濒危候鸟,受气候变化和人类活动威胁。本文以小白额雁为代表性物种,定量分析了气候变化对长江流域中下游候鸟潜在生境及适宜性空间分布格局的影响。采用Maxent模型模拟了当前情景和全球环流模型(GCMs)气候场景下小白额雁潜在生境及其适宜性分布。研究结果表明,小白额雁分布特征与其栖息地周边植物分布呈显著相关关系;运用Maxent模型模拟小白额雁六种主要食源植物的分布特征,并将其结果作为环境变量,将显著改善小白额雁潜在生境及其适宜性模型的模拟性能;在两种典型浓度情景(RCP 2.6和RCP8.5)下,2070年小白额雁潜在生境适宜性面积将下降。为应对气候变化对小白额雁的影响,应采取更加合理的管理措施和保护政策,包括调整保护区的大小、形状和用途。     

格网DEM地形模拟的形态保真度研究

分析了现有格网DEM地形模拟的失真现象,研究DEM地形模拟失真的根源.提出了DEM地形形态保真度的概念,探讨了建设高保真DEM必须解决的问题.     

基于ArcGIS的二次调查地籍图形拓扑检测

为了保证二次调查地籍数据库的质量，提高地籍空间数据检查效率，在分析二次调查地籍建库规范的基础上，提出了应用ArcGIS对地籍图形进行拓扑检测，并通过实例加以阐述。     

涉农企业及农业资源信息系统的研究与开发

从农业信息化与涉农企业管理两方面出发,研究探讨基于GIS技术的农业信息化管理问题,并最终提出了一个涉农企业及农业资源信息系统模型。将电子地图的空间表现功能和空间分析功能应用于涉农企业及农业资源信息管理,直观地表现了涉农企业和农业资源的分布情况以及相关信息,为农业生产和农业决策提供辅助支持。