Experience with the ULISS-30 inertial survey system for local geodetic and cadastral network control

The capability of the recently developed SAGEM ULISS-30 inertial survey system for performing local surveys at high accuracies have been tested in a field campaign carried out November 1989 on the island of Fyn, Denmark, in cooperation with the Swedish National Land Survey. In the test a number of lines between existing national geodetic control points were surveyed, along with points in the less reliably determined cadastral network, forming an irregular network pattern of 10–15 km extent. The survey involved frequent offset measurements (up to 50–100 m) with an ISS-integrated total station. The profile geometries were not particularly suited for inertial surveys, with narrow and rather winding roads, necessitating frequent vehicle turns. In addition to the pure inertial surveys a kinematic GPS/inertial test was also carried out, using a pair of Ashtech L-XII receivers. The inertial survey results, analyzed with a smoothing algoritm utilizing common points on forward/backward runs, indicate that 5-cm accuracies are possible on reasonably straight profiles of 5 km length, corresponding to a 10 ppm best-case accuracy for double-run traverses. On longer, more winding traverses error levels of 10–20 cm are typical. To handle the inertial data optimally, proper network adjustments are required. A discussion of suitable adjustment models of both conventional and collocation type is included in the paper.     

Iceland and mid-oceanic ridges

Magnetic anomalies over Iceland, measured by Serson et al. (1968), are similar in shape and amplitude to those found over mid-oceanic ridges in general and over Reykjanes Ridge in particular. However, the geology of Iceland does not favour the simple model of sea floor spreading as formulated by Vine and Matthews. The Brunhes period volcanism can neither in place nor in time be related to an opening process of the Central Graben, which actually is a downthrown block and not an opening rift. Furthermore, the structure of Iceland is not symmetric with respect to the Central Graben. The geology of the Central Graben of Iceland does support a model proposed by Thorleifur Einarsson in 1967. In this model elongate ridges of pillow lavas are thought to have piled up on top of parallel volcanic fissures. The actual spreading is negligible. The fissures have been opening at random over a width of about 120 km, and no definite time scale can be set up for the associated magnetic anomalies. This conflict between Icelandic geology and the current views on sea floor spreading, can be evaded by supposing that the mere circumstance that Iceland is an island obscures a spreading process underneath. One might also postulate that Iceland nevertheless should stand as an example of a mid-oceanic ridge which implies that our ideas on sea floor spreading should be thoroughly revised.     

Geochemistry of suspended matter from the Baltic Sea 2. Results of bulk trace metal analysis by AAS

In 1984, on a transect covering the whole Baltic Sea and parts of the adjacent North Sea, 160 water samples were taken and analysed for their concentrations of particulate and dissolved metals. In addition, the suspended materials were investigated for their elemental bulk composition.The particulate fractions represented from about 5% (Cd, Cu and Ni) to 50% (Fe and Pb) of the total (particulate plus dissolved) concentrations. For some elements (Ba, Cd, Cu, Pb and Zn), the particulate matter from the surface microlayer was enriched with respect to those suspended materials taken from 0.2 m depth. This could reflect the atmospheric input of metal-rich aerosols. In anoxic deep waters, maximum contents of Zn (6400 μg g⁻¹), Cu (1330 μg g⁻¹) and Cd (12 μg g⁻¹) were observed in the particulate matter, indicating sulphidic forms. On the other hand, under oxic conditions the distribution coefficients (K_d) decreased with the water depth (Cd, Fe and Pb).Relative to global background levels, the particulate matter contained metal “excesses” amounting to more than 90% of the total contents (Cd, Mn, Pb and Zn). Automated electron probe X-ray microanalysis (EPXMA) revealed that the elemental composition of sediments is mainly governed by post-depositional processes of early diagenesis and is only weakly related to the composition of suspended matter in the overlying water body. For instance, in relation to surface mud sediments of the central Baltic net-sedimentation basins, Zn, Cd, Cu and Mn had 30–100% higher levels in the suspended materials. The general pattern of metal contents of particulate matter taken from 10 m depth on a transect between the Bothnian Bay and the North Sea were—possibly as a result of anthropogenic inputs—rather similar for Pb, Zn and Cu. For Fe and Mn, the distribution patterns along the transect were probably governed by the natural loading characteristics and by the biogeochemistry of those elements.     

Measurement of the signal to noise ratio in seismic profiling

The measurement of the signal to noise ratio in continuous seismic profiling systems is carried out by means of a small general purpose digital computer equipped with an analog to digital converter. The computer is programmed to compute and compare the power spectrum of a sample of noise to the power spectrum of a sample of noise plus an echo. Power spectra of some twenty to fifty shots are averaged to yield reliable estimates of the signal to noise ratio as a function of frequency. The observed spectra agree well with spectra calculated from signals measured near to an air-gun. This measurement of signal to noise ratio as a function of frequency provides unambiguous information for the adjustment of the necessary band-pass filter thus improving the operation of a continuous seismic profiler.     

Meadow fragmentation and reproductive output of the SE Asian seagrass Enhalus acoroides

Flower and fruit production of the abundant, tall, long-lived, dioecious, surface-pollinating seagrass species Enhalus acoroides (L.) Royle were estimated at seven sites in the reef flats off Bolinao (NW Luzon, The Philippines) featuring different fragmentation of the seagrass meadows. Fragmentation of the seagrass meadow was quantified as cover of E. acoroides and all seagrass species present in 20×20 m plots. E. acoroides and overall seagrass cover were correlated positively. The proportion of female flowers of E. acoroides that developed a fruit increased sharply as overall seagrass cover was around 50%. Apparent sex ratio bore no relationship with overall seagrass cover. This threshold-type of relationship suggests that fragmentation of seagrass meadows can have a major effect on the reproductive output of this species. A possible mechanism underlying these results would be a non-linear increase of the efficiency of trapping the surface-dispersed pollen with increasing seagrass canopy density. This provides the first evidence based on real data that fragmentation can affect the population dynamics of seagrass species.     

Micro-fracture instabilities in granular solids

We study the aspect of unstable behavior (like strain localization bands) in elastic solids as a consequence of micro-fracturing. A two-scale approach of computational homogenization is considered. The macroscopic behavior is investigated by finite element computations on a unit cell. At the micro-level, we consider a granular structure with elastic grains. The inter-granular boundaries are modeled with cohesive laws, friction and unilateral contact. We show that decohesion between grains gives rise to macro-instabilities, indicated by the loss of ellipticity, typical for deformation localization bands. The relation between the microscopic softening on inter-granular boundaries and the onset of macro-instabilities is studied through numerical examples. The influence of the cohesive law and friction parameters is analyzed. For periodic distributions of granular structures, we prove the loss of periodicity by failure and the corresponding size dependence effect in the homogenized response. We present numerical examples of bifurcation of solutions for granular cell structures and of particular solutions specific to elementary volumes with periodic cell distribution. Size dependence appears in the unstable regime and is strongly influenced by cohesion and friction parameters.     

Yucatán karst features and the size of Chicxulub crater

The buried Chicxulub impact structure is marked by a dramatic ring of sinkholes (called cenotes if containing water), and adjacent less prominent partial rings, which have been shown to coincide with maxima in horizontal gravity gradients and a topographic depression. These observations, along with the discreteness and spacing of the features, suggest a formation mechanism involving faulting in the outer slump zone of the crater, which would thus have a diameter of approximately 180 km.
An opposing view, based primarily on the interpretation of gravity data, is that (he crater is much larger than the cenote ring implies. Given the association of the known cenote ring with faults, we here examine northern Yucatan for similar rings in gravity, surface features and elevation, which we might expect to be associated with outer concentric faults in the case of a larger, possibly multiring, structure.
No such outer rings have been found, although definite patterns are seen in the distribution of karst features outside the crater rim. We explain these patterns as resulting mainly from deformation related to the block fault zone that parallels tbe shelf edge of eastern Yucatan.